I have an image that has elements pasted in from PNG files, and those elements have some shades of green. I want printed output in gray scale only, so I did Image -> Mode->Grayscale. The image on screen went gray as I wanted. When I print it, however, I get an image in which *some* of the colored parts still are colored!
View 1 RepliesI happened to download a rather dark black and white entry into Photoshop and noticed it was several shades lighter in Photoshop than in my browser. It loaded in Photoshop in Grayscale mode. So I tried this:
1. Open Photoshop.
2. Set the background colour to 53 Red, 53 Green, 53 Blue.
3. Select File - New, set the Width to 800 pixels; the Height to 600 pixels; leave Resolution at 72; set Color Mode to Grayscale - 8 bit; set Background Contents to Background Color; and click OK.
4. Save as a jpeg (maximum quality).
5. Open the jpeg in your browser.
When I do this the browser image (I tried both IE and Firefox) is a shade or two darker than the Photoshop image. I used the Colorzilla extension in Firefox to measure the actual color displayed and it comes out at 37 Red, 37 Green, 37 Blue.
I need to transform a selection of ranges of grayscale image in colors. For example: using GSM of a gray scale image as a parameter I want to recode pixels from 0 to 20 in red, 21 to 40 in orange, 41 to 60 in yellow and so forth... until pixel valued 256 in GSM.
View 2 Replies View RelatedI reformatted my computer and installed a fresh copy of Windows 7 service pack 1 and installed Photoshop CS6 and when I print my work the color gray prints as brown and the yellow green has a shade of brown in it as well so its darker. I did calibrate my monitor, I use sRGB IEC61966-2.1 as ICC profile and RGB in working spaces, and US Web Coated v2 as CMYK. I changed the mode to CMYK 16 bit and proof setup to Working CMYK. In printer setting I set the color handling to Photoshop manages colors and set it to hardproofing. I did match it with the color management in display settings.
I think my Epson T1100 printers are fine because they both print the same color gray as brown so it must be in Photoshop where the problem is.
This is frustrating..Before I reformatted I was using Photoshop CS5 and my prints are fine but when I reformatted and installed a fresh copy of Windows 7 and Photoshop CS6 the printing problems starts, I reinstalled Photoshop CS5 but the print outs still has problems, color gray prints as brown..By the way, I print on white bond papers and white box boards, so color blending is not the case I'm sure..
When I try to print a PDF I get a grayscale drawing; I've been trying to go to the plot styles table in the plot window, my plot style doesn't appear, only appear plot styles with stb extension not ctb as mine is (as in my regular drawings). I made this drawing using a new template, (one of ones that comes by default with the program) and then I imported my layers; maybe thats the problem, but, what can I do?
View 2 Replies View RelatedI have a .shx font from our state DOT that I need to include on my sheets. The problem is on some drawings it is filled (like I want) and on others it is open (which is bad). The text is located in the layout tab. I've tried all of the following regular fixes with no luck:
Set the FILL command to on.
Set the FILLMODE system variable to 1.
Set the TEXTFILL system variable to 1.
In the Plot dialog box, clear Hide Objects.
Turn off the Hideplot property of the viewport.
I am guessing the problem is drawing specific bacuause I can copy the text back and forth between good and bad drawings and the fill comes and goes.
The same text object in 2 different drawings.
I also exported my system variables from the good and bad drawings and compared the two and none of the variables that matter were different.
I would just copy the drawings over into my good template and be done with it, but I have a large number of files that were created around the office that now have outlined text and don't have the time to monkey around copying all the drawings over to the good template. I know the long term solution is to get people to do things right in the first place, but in the mean time I'm hoping to be able to just change a variable and have the text be filled.
Is there a preference in GIMP to display color channels in grayscale? Rather I should ask, has this issue been resolved because I know at one time it was a big difference between PS and the GIMP. And yes, I know that I can decompose and recompose...
View 5 Replies View RelatedI downloaded an image of the internet to edit [URL]......
Because I want to edit the base and put clothes on it and such. I opened the image in gimp and added the lines for the clothes on multiple layers. I went in to color it and the color showed up grey, any color i used turned out to be grey. Then I looked up at where they put the name of the image and it says: (greyscale, 6 layers) I assume that why i cant color it. is their any way to change this so i can add and edit color?
My default background/work area has been transparent--displayed as a light gray and white checkerboard--forever.
Today it changed to dark gray. It's still transparent, but it shows up on the screen as dark gray. I want it back the way it was. I've read all the solutions on the Adobe forums (using the magic wand, or the background eraser, etc.) and none of them work.
I can't help but think I inadvertently changed some setting,
How can I create a 2D gray scale image from a color image?
View 1 Replies View RelatedI have a color .jpg image that I want to convert to grayscale and then add annotation. Is this easy to do in Illustrator?
View 9 Replies View RelatedHow to change black and white hand-prints into color for some art work for my kids. I am already able to switch between black and white between the foreground and background, but not able to change all of the black "color" to a different color including all the minor lines on the hand and foot prints.
View 6 Replies View RelatedBasically if I select a color and apply it to the image it turns gray. [URL]
View 1 Replies View RelatedWhen I try to use new patterns I have downloaded, they are always a "gray" color. How do I change the color?
View 1 Replies View RelatedI want to change a gray scale image to color how do i do it?
View 4 Replies View RelatedI've been using photoshop for ages just doing random basic stuff at home and I've never had this problem before...What happens is when I have a white background on the screen with (for example) black text on it, it will print out with a light gray background instead of the white background that appears on my screen...I don't know if its a printer properties thing or just my crappy printer itself
View 2 Replies View Relatedi'm using gimp 2.6.11 on a windows 7 enterprise machine. I made some brushes in rbg mode and saved as gbr, and also converted some ps brushes by exporting an abr as a png in rbg mode then saving as gbr. my goal is to get a gbr brush that i can change the color to the foreground color. I tried changing the mode from rgb to greyscale but when i try to re-save as gbr i get an error message that brushes can only be saved in greyscale or rgba (!).
i've tried saving the gbr as a png, changing the mode to greyscale and then saving as gbr but i get the same error message.
Any good skin texture brushes for gimp that can be used with foreground color? It's for a digital portrait of a male so I need an orangepeel texture and some other skin textures that aren't too airbrushed.
I'm new to GIMP. I've used Adobe Photoshop for years an years and no longer have access to the license. So I've been giving GIMP a test drive for a little while. I'm confused as to why when I apply a filter to my image or layer it changes the color to B/W or grayscale? I'm sure this is a relatively easy fix, but most filters I'm using don't have many options and I can't seem to apply the filter "as is". It always changes my whole graphic to grayscale. See "Before & After" attachments.
View 1 Replies View RelatedI've had gimp for quite awhile now and ive never come across this problem before. im trying to use the layer mask with greyscale and inverted image just as i always have. but when i go to edit my color i get grey! ive always been able to change colors this way! i know that the mode is set to rgb. im on the correct layer. ive closed it. ive restarted my laptop.
If i click on the transparency part i get a big blob of color as i should. but on the mask it does what its supposed to but in shades of grey. i dont understand whats wrong! it always worked perfectly. . .
newest Gimp
windows 7
Only thing that i have changed is i have a new tablet but i still have the problem without the tablet
I have a gray Image that I need to turn it to green color. it is bunch of trees that should be appear in the green color.
View 3 Replies View RelatedIs there any way I can directly make a grayscale image into an alpha transparency channel?
I mean, NOT involving selection? Because selection by color to layer mask,is really difficult what I need to do the selection threshold.
Why is it easy to turn an alpha channel into a grayscale image but not the reverse?
How do I quickly separate an image's channels into grayscale layers? I'll need to do this frequently, so is there an automated way? If there isn't, can it be done with python scripting? Would it take me a long time to learn how to write such a script assuming I know a bit of Python (as used in Blender), but haven't done any scripting with GIMP?
View 2 Replies View RelatedWe have experienced what we think is a bug in AutoCAD 2010's printing. We are running A2010 with Update 1 & 2 installed. Same issue on both x32 & x64 hardware.
Each project is setup with a title block xref'ed into the sheet (quite common method).
The Title Block xref generally has images loaded & therefore the image is a child to the sheet file when the TB is referenced in.
We have used this method for about 15 years across most versions of AutoCAD with no issues before now.
Now on AutoCAD 2010, when we print the sheet, the xref'ed TB images print black & white, rather than color. However if we use AutoCAD 2008 with same pagesetup/ctb/pc3 etc, we get the same print, but image is colour (as we would expect & want).
This leads us to think that there is some issue in AutoCAD 2010 with xref'ed images & how they are treated when plotting.
To complicate matters further, if we bind the title block, thus making the image embeded within the sheet, the images now print fine in full colour.
So, if a image is loaded via a xref'ed dwg, it plots in Black & White. If image is referenced into live sheet (not via xref), then it plots in color. All other xref'ed linework prints as expected (defined by ctb).
Is there any new variable which manages the colour printing of the image in A2010 which we are not aware of (that didnt exist in A2008)?
how to use the match color tool to automatically convert one grayscale image into multiple output images based on a collection of color swatches? Or a better process to achieve this automated?
I have all the swatches in psd files in one directory. I can do them one-by-one but I was wondering if there was a way to automate this process and have it spit out and save the different images automatically based on the saved swatch colors.
My image is in grayscale though it's recognised as RGB. It contains structures in white which I would like to fill with a colour. So basically, I'd like for all the white in the image to show up as e.g. red.
How do I do that? I'm guessing it must be possible to have a red layer and somehow this will then fill the white, but I'm getting confused with background and foreground filling options and I don't know which transparency options I have to choose.
I am making some new business cards in Gimp 2.6.11 on Windows OS. What is the best way to place the card image onto a format that prints a sheet of Avery labels? Is that an external plugin? Where would I find that resource?
View 5 Replies View RelatedMy company is switching from ctb files to stb files. With the ctb file, we make concrete hatch with two layers. A top layer with the concrete hatch pattern and a background layer with a solid hatch patern. The ctb file concrete plots the concete hatch black and the solid background hatch light gray. I am using civil 3d 2013 and the hatch allows a seperate background color mask. I am trying to make all my concrete layers (Top of Curb, Curb Flowline, etc.) a certain color scheme, i.e. shades of green. I would like my on screen concrete hatch patern to be a green color with a gray background, but plot the concrete hatch black with a gray background. I can not figure out how to do this without making two layers. Is there a way to use one layer and utilize the background color mask to show on screen green and gray, but plot black and gray?
View 4 Replies View RelatedIn both Photoshop and Illustrator the gray colors look brown. However, in Fireworks and other programs the gray colors look gray. Any color management settings to fix this?
View 3 Replies View RelatedI want to select a specific color from within the image, and change all similar colors within that image to a different color. In other words, after using the Color Picker Tool to select a color from the image, I want to take the selected color (and everything in the image that is equal to or similar in color), and change them all to a different color.
I tried using the Path's Tool to create an outline in the image, and changing colors that way, but it changes all the other colors in the selection I don't want to change. I just want to change all colors in the image/selection that are equal to or similar to the selected color. How do I do this?
The project is a photo montage. It was 4-color, now must become 2 colors. So I've changed each of the original 4-color photos (jpg and eps) into separate psd files (as grayscale/duotone/montage-and assigned it One pantone color)
Â
In a new psd "montage" file, I plan to place each photo on its own layer, adjust tints, transparency, etc, to create one new montage/flattened.I'm not sure which color mode is best when setting up this new file, CMYK or grayscale?
Â
Once the PSÂ doc is done, the job will be saved as a PDF for 2-color printing.I want to insure the 2 pantone colors separate properly at press.
I have a color picture, and I want to convert it to B&W, and then I want to add another color to it (for example – red). I don’t want to paint some areas in it, I want for example to keep all the red parts of the picture, or only part of the red parts.
It something like in the movie Schindler's List, in the B&W scene where you see a little girl with red coat.