In the attached image, it comes up as one layer. What I want to do, is change the background gradient. So I guess I need to move the image of the bus to another layer and then change the background. But I don't know how.
View 1 RepliesI am in the process of scanning about 50 photo albums almost all B&W prints so I decided to try out the divide scanned images plugin however I am having trouble getting it to divide some of the images it wants to cut some of them in half and I am at a loss of how to adjust to get it to behave.
View 5 Replies View RelatedI downloaded an image of the internet to edit [URL]......
Because I want to edit the base and put clothes on it and such. I opened the image in gimp and added the lines for the clothes on multiple layers. I went in to color it and the color showed up grey, any color i used turned out to be grey. Then I looked up at where they put the name of the image and it says: (greyscale, 6 layers) I assume that why i cant color it. is their any way to change this so i can add and edit color?
I'm having some issues using either GIMP or PS to do this, so I figured I'd ask here. when it comes to image editing and tasks like this, but I'm currently being asked to do something for a job.
I need to take a single image which is a restaurant floor layout, then make it so all of the tables on the image are a different layer so that they can be moved around/customized accordingly.
As far as I can tell, this would involve creating layers, copying the tables from the main image, pasting them all on top as their own layer, and then sliding them around from there.
Is there any easy way to do this, or am I completely off-base?
I have some very old GB postage stamps which can be identified by their plate numbers. The plate number, which is engraved in the design of the stamp, has an effect on the stamp's value. Unfortunately on a number of stamps the cancellation mark obliterates the plate number. I would like to be able, in a digital image, to lift the image of the cancellation mark to reveal the design underneath.
I have tried using Adobe and Corel imaging software without luck.
how to place an gif between two layers (or add text, brushes, images over it) without screwing up the animation. I've experimented with it, and the results tends to be that one of the layers (pictures) go missing in the animation or the animation just does not animate.
View 3 Replies View RelatedI would like to transfer several layers from one image to another larger image and have the layers maintain their original alignment to one another. When I simply drag the layers from the layer window to the target image, they typically are not aligned when they arrive.
View 2 Replies View RelatedI am looking for plugin that divide one photo or image in 10 rectangles
View 2 Replies View RelatedHow & where to modify my ''Underlying layers'' for an image I am working on.
The overall project/design is for a t-shirt mock-up template. The whole idea is to make it as realistic looking as possible (photorealistic)
I found a great tutorial (which unfortunately was made for photoshop...) I was to follow it and pretty much apply the instruction to Gimp. However, there is part where the ''Underlying layers'' are being tweeked.
I am able to follow everything up to (4:32) [URL] ...........
I have been trying out gimp and i'm getting the hang of the basics but what i would like to know is how can i scroll multiple layers on the same image,
i have been using the 'move path' function and i can get one layer to scroll but how do i add more layers to the image? i want one text layer to scroll horizontally and then another different text layer to scroll vertically but at the moment i only get one or the other.
first post from relatively new user of Gimp 2.6.7 on Vista.
I'd like to be able to quickly fit the image to the visible layers -- usually just one layer, in fact. I'm currently doing it by drawing a rough marquee and then correcting it at high magnification before using Fit Canvas to Selection, but there must be a better way! :roll:
I created an image in gimp and flattened it before saving. I now want to edit some of the text in that image, but when I open in Gimp "As Layers" or just open it, it does not open in three different layers, like I had before flattening it. Am I doing something wrong. I saved it as a jpg file after flattening it.
View 3 Replies View RelatedI'm using Gimp 2.8.2 on Linux. I've configured the UI to single-windowmode and have opened multiple images, each with a tabbed display.
It is my understanding that I should be able to grab a layer from oneimage and drag-and-drop it onto the tab of another image in order toappend a copy of that layer in the new image. I have not been able to dothis. I'm grabbing a layer from the layers dialog and dragging it to the tab-thumbnail, but the layer is not copied to the new image.
A couple of comments for the UI designers:
* I find the [X] icons on the image tabs to be a real problem getting accidentally selected and dismissing the image when attempting to quickly select another tab. I would prefer another tab dismissal method such as right-click-menu close.
* Some user control over the tabs would be good. For example, I would like to see the the vertical height of of the tabs be smaller and have the option of displaying file names and/or icons.
I have an image with many layers. I want to cut a vertical strip out of the middle of one of the layers because I want to narrow the transparent gap between the left side of that layer and the right side. That is, my image has stuff on the left side and stuff on the right and a gap in the middle through which shows the pattern in the layers below, and I want to narrow that middle gap. I want to do the same thing as cutting a vertical strip down the middle of that top layer with scissors so I can scrunch the sides together, so less of the patterns on the layers behind shows through.
Is there any way to do this? It doesn't work when I simply select the area I want to cut and click "cut" or "clear" - those commands don't get rid of the canvas in that section, just the contents, which are transparent anyway.
I'm trying to avoid resizing the canvas and then laboriously reconstructing the layer with all the finicky alignment issues, because that seems unnecessarily time-consuming, when all I need to do is remove a gap in a blank section. I tried using guides to guillotine the image, but that, too, is turning out to be time-consuming in terms of reassembling the image. I know I must be missing something obvious - how does one simply remove a selection of the canvas (and not of the image itself) with the selection tool?
I have an image that I resized and that resulted in a gray checker board pattern above and below the original photo. I tried to add another photos above by copying and pasting it but get nothing I can see.
I tried merging visible layers but that did nothing (obviously since the copied photo is not visible).
Specifically I open the second photo, Select > All, Edit > Copy, went to the first image Edit > Paste resulting in a outline box of about the right size but without anything in it. I dragged this to the place I wanted it but I cannot get it to become visible. When I anchored the layer the outline box went away.
I have two layers but the second layer appears to be exactly like the first one.
I figured out how to use the layers option to fade an image into white for a Blackberry theme I'm making. After getting the hang of that, I figured I could try the same thing with a different image. But instead of opening up both images in different colors, both show up as the color of the first image. Both images are png files, the same file format that I used the first set of images for. I have not changed the size nor made anything transparent.
View 1 Replies View RelatedI figured out how to use the layers option to fade an image into white for a Blackberry theme I'm making. After getting the hang of that, I figured I could try the same thing with a different image. But instead of opening up both images in different colors, both show up as the color of the first image. Both images are png files, the same file format that I used the first set of images for. I have not changed the size nor made anything transparent.
View 2 Replies View RelatedAny plugins that will do the job in GIMP?
View 3 Replies View RelatedI'm a Gimp newbie, using 2.8.4. I have a png image that's 530 pixels wide. I'm trying to merge it with a white background layer that is 960 pixels wide. I need to align the image to the right side of the background layer. This is what I did:
- opened my image
- created background layer (960 px wide)
- made background layer the bottom layer
- clicked on Alignment tool
- clicked the hand cursor on the image (530 px wide)
- made the background layer the active layer
- set "Relative to:" Active layer
- clicked on the right alignment arrow
The image did move to where I wanted it, but most of the image from the right edge disappeared, so all I've got is a small portion of the left side of the image in the middle of my background layer. Then I did the following:
- merged visible layers with Expand as necessary
That action merged the layers, but all I have is a small part of my image near the center of the background.
Attached File(s) Screenshot from 2013-06-25 19:41:24.png (59.32K)
Is there a way to take a flattened image and reverse that so you can manipulate the layers? Photoshop allows it.
View 4 Replies View RelatedHow do I quickly separate an image's channels into grayscale layers? I'll need to do this frequently, so is there an automated way? If there isn't, can it be done with python scripting? Would it take me a long time to learn how to write such a script assuming I know a bit of Python (as used in Blender), but haven't done any scripting with GIMP?
View 2 Replies View Relatedhow do I make the layers of the image follow the contours of the book background to make it look more realistic like it is text in the book? I have an open book background and I want all my layers in the xcf file follow the curves of the book, how do I do that?
View 4 Replies View RelatedI have a capstone lab project due tomorrow for my graphic arts class and I made a HUGE mistake!!! I created an image using 20 something layers and did SAVE AS as a .xcf image (with all layers open). Part of the project was to save in different formats: .xcf (with open layers), a .png, and a .jpeg (optimized). So, I did the first save and then flattened the image to SAVE AS a .png with a different file name.
Long story short, I was tired and had way too many images open at once. When I was closing all of the images I accidentally saved the changes (flatten image) to my original .xcf (with open layers)!!!! Now, my .xcf that is supposed to have open layers only has one layer...the finished project!! I tried going to the file properties to restore a previous version, but it says that no previous versions were found! I also downloaded a norton "unerase" utility, but maybe I am not scanning properly to locate the file!?!
I'm using Gimp 2.8.6.Try as I might, I'm still trying to figure out how to effectively 'merge' 3 shots of the same scene taken at 3 different exposures (using the exposure bracketing feature on my camera).The idea is to end up with the equivalent of an HDR image.
I assume that I open the first image and then open the other two as layers . .
my gimp 2.8.6 makes majority normal layers turn into text layers..
Even if i "discard text information" from layer..and then save it as .xcf it doesnt work! Same layers appear as text layers when i open that .xcf Its not a big deal but it really slows me down when im working with layers..
I merged my layers down to scale to proportion and I thought I was done with the project, so I saved it and exported. I then learned that I did something incorrectly, so I went back to the project only to remember I merged the layers and I don't know how to undo that. How do you revert the layers back to layers?
View 4 Replies View RelatedAll of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 Replies View RelatedIllustrator cs6 - I have used image trace to create a 3 colour image of a photograph. Is there a way to create layers based on the three colours? (One layer for each of the three colours)
View 2 Replies View RelatedI'll add a layer It will have ants around
I'll move it around and position to where I want it
Question 1: how do I get rid of the ants? I've googled on how to deselect, but can't can't find an answer
Question 2: I don't know what I do... but by selecting other tools or just clicking around like mad - the ants go away. Yippeee! Except... damn! The layer has now gone into the background and I can't move it around any more
how I can put my layers into groups now, but there are a few problems I've seen pop up.
First are foremost, when I disable the visibility on a group, if I use the move tool it will select layers from that group that were visible before the group was made invisible. Seriously, there is absolutely no reason whatsoever that I would ever want to move an individual layer that I can't see. This clearly is a glitch and needs to be fixed.
Second of all there is an issue with a layer's mode when it is in a group. For example, if a layer is set to multiply, if it is set in a group it will only multiply on layers within that group. Now this I can see a good use for, but honestly, it is not how I usually want to use layers. I'm not usually trying to separate the actual graphics in my image, I'm just trying to organize my massively long layer dialogue into something more useful. It's great to collect different aspects of my image and keep them all together. But basically every time I need a multiply layer or other effect, I need it to effect the whole image. To keep it effecting an entire image I have to make two separate groups, each above and below the layer, in order to organize my image.
Now, since there is certainly an advantage that could be given by not having such layers have any effect outside of their group, I can't argue that the feature should be removed. However, I do think it would be fantastic if a property could be added to a layer group that would allow for such layers to effect the image outside of the group or not.
The third thing I have to say about groups is linking. First of all, as it stands, when I activate linking on a layer group it has absolutely no effect, making the option redundant. However, what would be useful is if I could link an entire group to itself and then move every layer within a group in tandem.
Often times I want to move several groups of layers around so I can arrange a composition. For a simple example, maybe I have several images of characters, each built with a layer for flats, lighting, textures, etc. And to arrange the composition I want to move the whole character with all its layers to one spot, then grab another character with all of its layers to another spot.Conventionally, there are only two ways I can do this. Either I flatten each of those groups and move them as single layers, destroying my ability to alter them with any level of convenience, or I have to manually link every layer for that character, move it, un-link every layer, link all the layers in another character, and repeat.But it would be so much nicer if I could link all the layers within several groups, and move each group as a whole without moving any other layers.
Since the link option on a layer group doesn't do anything anyway, it seems reasonable to me that enabling it should have that exact effect. Using the same example, if I have each character in its own group, I activate the link option on all of those groups all at once, and then I can grab a layer on any group and that whole group will move, but not any other layers.Even if it automatically linked all the layers in that group to all other linked layers, it would still be much easier to activate and deactivate the link on just one group each time I move that one group, rather than each individual layer.
GIMP example.docx (Size: 141.1 KB / Downloads: 31) I just found about GIMP several days ago. I really like the features that are offered and cant wait to dive in and play around with it. However, I am getting a bit discouraged because it is not working on my computer the way it does when I visited some u-tube videos. So far I have a problem with the layers. I selected, new, added two layers, therefore I had three layers to work with. When I would toggle between the layers the picture didn't change at all, the screen only allowed me to view the last picture I imported. So, I thought I would hide the third picture and work with the second to see what would happen. I scaled the second picture and it scaled them all (note: the pictures where not linked). I have uninstalled and reinstalled the program and it still did the same thing. I am working with Windows 7 if that makes any difference?
View 4 Replies View Related