All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 RepliesThis may be a very simple question (or not):
As shown here, I have a Photoshop project that has many layers in it. All of the layers have pretty much the same pictures in it, but with minor differences. I'm trying to find a way to change the color of ALL of the layers without having to go into each individual one.
I want all the layers to have the exact same color different than what is shown.
If an image is opened from ACR normally, the base layer will be named "Background". If an image is opened as a Smart Object, the base layer will be named as the filename of the image.
If an action is programmed that creates new layers on top of the Smart Object then selects the base layer, the step in the action will be 'Select _MG_ 1234' or whatever the name of the image file is. If you try to run that action on a different image file, an error message will pop up at the step where the base layer is selected indicating that the file is not available because the action is pointing to a specific image file name.
How does one go about making an action with smart objects generic so that it will run on any image file?
How to disable border highlighting when selecting a smart object in the layers panel? Designing pixel-to-pixel is cumbersome when the highlight appears and temporarily extends the size of the shape by 1 px.
View 14 Replies View RelatedI've only just started having a problem with Photoshop. I'm running it on Mac OSX
My images will randomly take a chunk out of all layers, and the background will turn black where it was originally white. In one case all the layers on my canvas were distorted by a checker pattern of bright colours. All the images I am currently working on are in RGB mode which were hand drawn black and white images that were scanned.
I'm not sure what is going on but closing the image without saving and the closing photoshop and even restarting my computer doesn't seem to fix the problem.
I've had this issue with layers turning off randomly in the previous years; it has been fixed at some point when a service pack was installed. It is back now in Autocad 2013 and SP1 does not work.
Usually it is happening after the unisolate command. I assume that it is related with the unisolate function that does not work for all layers.
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
why don't I see all the layers in the Layers palette
View 2 Replies View RelatedI am editing figures for a journal and I need arrows for multiple images. Is there a standard arrow? I can only see free hand. If I use a free hand arrow I then want to copy it to the other images for consistency. How do I copy or share layers between images?
View 1 Replies View RelatedIs there way a to view a list of what Smart Layers are being used by a .PSD? Kinda of like Illustrator's Link palette?
View 2 Replies View RelatedI scan images to go into my website on a regular basis. I scan them bring them into photoshop, use the marquise tool to move individual images to be corrected and made ready to put in website, then I save them and delete that layer from photoshop. I then go to the next image and when I use the marquise tool the previous image keeps coming on the screen.
I am unable to delete permanently that first image so I can move on to the next image. Then I ran into the problem of not being able to more an image from the clipboard. It isn't highlighted so I can click it. Don't know what to do and I have to resolve this ASAP to keep up with my work.
I created a smart object with linked adjustment layers. I made them into a group. (I also tried this with the layers just being linked, and not grouped.) I want to move the smart object, with its adjustment layers, into another document. Ideally, I'd like to do this using "replace contents." When I do so, the smart object comes into the destination document flattened with its adjustment layers. Is there some way to keep those adjustment layers linked, not flattened, to move with the smart object layer?
The workflow I'm trying to achieve is to remove blemishes, etc. and make my all changes to my layer that I'd want to have made no matter what size and context I use that layer in. That is, make one smart object I can slot into a postcard, a 14 x 11 print, and other products. I don't sharpen until I have moved the layer/smart object into my target document, so that sharpening is appropriate for the final print size. Depending on the size and context, I may want to make changes to the levels/curves/hue saturation type adjustment layers though, so having these flattened when I bring the smart object in to my target document is disappointing.
While working and when the job was nearly done (Photoshop document with several layers to correct wrinkles, teeth, neck...) , I found out that the document is setup RGB.I have to convert it into CMYK but I don't want to merge it or lose layers since I need them in another Photoshop document too.
While converting the image from RGB to CMYK, I found out that some of the layers (hue/saturation adjustment layers) don't exist anymore when converted to CMYK...How do I get these layers (or at least the effect they give to the design) in CMYK?
I am trying to get photoshop to combine some objects in the stacked photos. I do not understand why after selecting all the various smart objects which are layered, and going to Layers- smart objects - stack mode is greyed out.
View 5 Replies View RelatedI have a logo that I am working with and I need to make it a 3D object for what I'm doing in After Effects. I am trying to make it 3D so I can edit it in repousse because all I really need to do is extrude it.
I've tried the different options in the 3D drop down menu but none of them bring me to edit in repousse.
Also, I know that I can make it 3D in After Effects my making multiples of it and what not but I don't want to go about it that way. Also, I'm working with CS5.5 and the 3D renderer plugin in After Effects is only available in CS6.
Is there a way to load selected images into PS layers as smart objects?
View 5 Replies View RelatedPS5 Vista. After a layer is converted for smart filters, the whole image still must be made 8 bit to apply a smart filter only to the converted layer, which defeats the purpose of the layer conversion and the utility of smart filters. I would like the rest of the image to remain 16 bit.
View 11 Replies View RelatedI'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedUsing Photoshop CS5 - after scaling a smart object do I need to remake it as a smart object again?
View 3 Replies View RelatedI have an item in my layers and want to make it into a smart object, when I right click that option does not come up. To make into a smart object does not come up anywhere in my layers tab.
View 2 Replies View RelatedI am using an image for a contact icon on a business card, but the print quality of the image is bad.
Now will it work if I convert the image to a smart object and print the image like that? (The original image is a much larger png file that i convert to a smart object then resize it to icon size)
I made some basic adjustments in Lightroom and then opened the image as a smart object in Photoshop. If I decide to make more changes in Lightroom how do I tell Photoshop to 'refresh' the underlying image?
View 11 Replies View RelatedI'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies View RelatedI often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
How can I convert a layer into a smart object with Adobe Photoshop Elements 10?
View 1 Replies View RelatedHow to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies View RelatedI have a part of the brain which is a 3d object. I need to split it up in to 2d layers at a set orientation, so i can mesure the area of a cross section.
View 1 Replies View RelatedI would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies View Relatedmerged layer results to a slight different color compare to its original unmerged layers. the result is that the merged layer has more bluish, What's wrong and what's the solution?. Im using CS3.
View 9 Replies View RelatedI have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
This discussion was opened in 2010 and I quess this is same problem:
"
How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers. I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers.
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!