Photoshop :: Smart Objects And Linked Adjustment Layers
Nov 20, 2012
I created a smart object with linked adjustment layers. I made them into a group. (I also tried this with the layers just being linked, and not grouped.) I want to move the smart object, with its adjustment layers, into another document. Ideally, I'd like to do this using "replace contents." When I do so, the smart object comes into the destination document flattened with its adjustment layers. Is there some way to keep those adjustment layers linked, not flattened, to move with the smart object layer?
The workflow I'm trying to achieve is to remove blemishes, etc. and make my all changes to my layer that I'd want to have made no matter what size and context I use that layer in. That is, make one smart object I can slot into a postcard, a 14 x 11 print, and other products. I don't sharpen until I have moved the layer/smart object into my target document, so that sharpening is appropriate for the final print size. Depending on the size and context, I may want to make changes to the levels/curves/hue saturation type adjustment layers though, so having these flattened when I bring the smart object in to my target document is disappointing.
View 2 Replies
ADVERTISEMENT
Mar 15, 2012
This may be a very simple question (or not):
Â
As shown here, I have a Photoshop project that has many layers in it. All of the layers have pretty much the same pictures in it, but with minor differences. I'm trying to find a way to change the color of ALL of the layers without having to go into each individual one.
Â
I want all the layers to have the exact same color different than what is shown.
View 5 Replies
View Related
Mar 11, 2013
I found an old thread from 2011 about the same problem and the mod reported it to the devs, but as far as I know no solution has ever been offered.(maybe in cs6? we are still using cs5)For one or two layers it's no problem to do it manually, but with say 40 layers with corresponding linked layers we need a better solution.
View 4 Replies
View Related
Sep 27, 2013
While working and when the job was nearly done (Photoshop document with several layers to correct wrinkles, teeth, neck...) , I found out that the document is setup RGB.I have to convert it into CMYK but I don't want to merge it or lose layers since I need them in another Photoshop document too.
Â
While converting the image from RGB to CMYK, I found out that some of the layers (hue/saturation adjustment layers) don't exist anymore when converted to CMYK...How do I get these layers (or at least the effect they give to the design) in CMYK?
View 1 Replies
View Related
May 20, 2013
I am trying to get photoshop to combine some objects in the stacked photos. I do not understand why after selecting all the various smart objects which are layered, and going to Layers- smart objects - stack mode is greyed out.
View 5 Replies
View Related
Apr 3, 2014
Is there a way to load selected images into PS layers as smart objects?
View 5 Replies
View Related
Aug 6, 2013
I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies
View Related
Sep 30, 2013
I often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Â
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
View 3 Replies
View Related
Nov 27, 2013
Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex.
This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
Â
How do I disable linked smart-object auto-update/refresh?
View 3 Replies
View Related
Sep 6, 2013
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
Â
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
Â
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
Â
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY.   IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
Â
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
Â
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!Â
View 4 Replies
View Related
Aug 3, 2013
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies
View Related
Nov 11, 2012
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
Â
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Â
Images shows my layout and what i've done this far
View 2 Replies
View Related
May 31, 2012
I have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
Â
This discussion was opened in 2010 and I quess this is same problem:
"
How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.Â
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers.  I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers. Â
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.  Â
Â
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!
View 3 Replies
View Related
Mar 20, 2013
All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 Replies
View Related
Jun 5, 2013
I need to merge 2 adjustment layers with 2 image layers. When I do, the look changes. Are there ways to do this without changing the look? I have attached a screen capture of the layers affected. Additionally the "Stars" layer has a "Screen" blend mode. This is on a Mac.
View 2 Replies
View Related
Aug 9, 2004
Im wondering if anyone out there knows of a way to merge linked layers into a new layer, i.e. i have 4 shapes i want to put a stroke around but i still want all 4 layers seprate...how can i create a new layer copy from the 4 shapes without copying each layer twice?
as of right now i merge the layers drag it into to another document then i undo my merge and drag the merged copy back into my working document...it works but gets kind of annoying...
View 2 Replies
View Related
Oct 26, 2012
In webdev it is not unsual that design involves multiple variations like "pages" where mostly header and footer stays the same while its "content" (the page itself) changes. And then simulate a navigation by means of hiding and unhiding each respective "page" folder. Where also the site's menu tranforms as "navigation" evolves.
Â
It is a bit frustrating in order to achieve this to have to create a lot of duplicated menu folders and place'em under every "page" just to represent this selected links. And then if you have to redesign that menu, you have it spreaded throught several folder locations.
Â
I think being able to hide/unhide linked layers at a glance of a click would be nice to have and would allow you a more strealined work while redesigning linked portions.
View 3 Replies
View Related
Jun 4, 2009
way to take multiple layers that I have linked together, then select an area on the image, and copy the linked layers that are within this area so that I can paste them somewhere else in the image and each layer will remain intact, so that after copying this selection of layers I can still turn them on and off along with the original layers they were on. basically want to copy a selection of multiple layers while allowing them to stay linked together. I can copy a selection of multiple layers, but they merge together instead of staying on separate layers.
View 1 Replies
View Related
Nov 19, 2004
If I make an Adjustment Layer, I notice that it effects EVERY layer underneath it. Is the only way to apply that adjustment layer to layers you WANT is to drag those layers under the adjustment, and then hold ALT and click the line BETWEEN the adjustment layer and the layer you want affected, thus making it a "Clipping?" layer?
View 7 Replies
View Related
Jul 21, 2013
So impressed with the quick answer from my last question that I have another. In Photoshop CC (think it's the same in CS6 . .) is there a shortcut for closing the adjustment layer panel instead of having to move the cursor over and press on the cross. I used to be able to just press return in Photoshop CS3
View 2 Replies
View Related
Aug 13, 2013
I use adjustment layers (curves) to modify the tonal scale of my files. In CS5 I could command click on the image with the eyedropper and a corresponding point would be placed on the tone curve in the curves window. When I try this in CS 6 (command click) the curves window collapses. What should I be doing differently.
View 2 Replies
View Related
Jun 21, 2006
I was wondering how you can make an adjustment layer in CS2 only affect the one layer beneath it, not every layer.
View 8 Replies
View Related
Jun 23, 2008
1.)
I have a portrait of two persons. They are treated differently
so I have them on separate layers with layer masks.
So the new retouched background gets through.
These layers are:
P1 and P2.
2.)
The background is:
B
3.)
I have some color correction adjustment layers.
a.)
Some of these are just for P1:
C1
b.)
Some of these iare just for P2:
C2
c.)
Some of these are just for B:
CB
----------------------------
I now place my layers this way:
Group1{ C1 P1 (linked as a clipping group)} ,
Group2{ C2 P2 (linked as a clipping group)} ,
GroupB{ CB B }
That works OK.
----------------------------
Question:
I also have some color correction adjustment layers
that is for both P1 and P2 but not for B.
How do I place them ?
I do not want to place them both in Group1 and in Group2.
I Want to have them in just one place.
View 5 Replies
View Related
Jan 26, 2009
how to make an adjustment to a specific Photoshop layer (in this case a tweaking the color on a person extracted from the background by green screen) without affecting the other layers. I have tried Adobe help but can't seem to find the solution.
I am using Photoshop CS4.
View 3 Replies
View Related
Jan 7, 2013
I recently upgraded to CS6 Master on Mac Mountain, and noticed that smart objects in Photoshop don't open in their respective applications. For example, when I double-click on the smart object, they open in Preview instead of Illustrator. How do I prevent Preview from opening smart objects? How do I make smart objects open in the application in which they were created?
View 2 Replies
View Related
Dec 13, 2008
Ok, so the title of this post sounds confusing. First off, I created a graphic in Illustrator CS3. It is to be used on a web page created in Dreamweaver CS3. I want to be able to streamline the editing process by using the Smart Object linking feature between Dreamweaver and Photoshop CS3.
Obviously, the problem is, I cannot link the Photoshop source to Dreamweaver because the source is not a Photoshop file, it is in Illustrator. The obvious solution to that is to export the Illustrator file as a Photoshop file. The problem with that is, I want to maintain the source in Illustrator and make edits in Illustrator.
So, my solution was to place the Illustrator file in Photoshop and make the Illustrator file a Smart Object in Photoshop. Then link that Photoshop file to the Dreamweaver page. So, basically, Photoshop is just the link between Dreamweaver and Illustrator. It works well! I click the little edit button in Dreamweaver abd it calls up the file in Photoshop. Then I double-click on the Smart Object layer in Photoshop and the source comes up in Illuistrator.
Now, here is the problem. To add to the confusion, I maintain versioning in Version Cue. So whenever I change the Illustrator file, I check it in to Version Cue. The Illustrator file I linked to in Photoshop is the local file on my computer. This file is syncronized with the version of the file that gets uploaded to Version Cue. This may sound complicated, but to see how I did it is pretty straight forward.
My assumption was, when I double clicked on the Smart Object layer in Photoshop, I would get the local copy of the Illustrator file to edit. But, that wasn't the case. Problem is, I got a temp file of the Illustrator graphic and NOT the original source file I linked to in Photoshop.
I can still edit the temp file and have those changes automatically made in Photoshop and then update the image in Dreamweaver. BUT, when I got to check in the new edits of the Illustrator file to Version Cue, it wants to create a new file and not rev-up to the new version of the original file. That's because the file I'm checking in is NOT the original file, it is a temp file.
Does anyone else use a workflow like this? If so, how do you do it?
View 1 Replies
View Related
May 20, 2005
A lot of the hype about CS2 has been around the Vanishing Point tool; Certainly it's cool, and it's probably the easiest feature to awe an audience with. But I think there is a new tool that is waaay more useful: Smart Objects. This is a feature that Adobe has done a terrible job of advertising and explaining—looking at most descriptions of it, it seems to be relevant only to those who often import work in from Illustrator or other apps. I use it just within Photoshop and I'm totally blown away by its power.
What exactly is it?
Smart Objects allows you to take a layer or group of layers and treat them as a single unit—a unit that you can scale, warp, and transform in any way you like without losing any of the data from the orginal layers that make up the "smart object" set. This smart object can be duplicated as many times as you want, and then it is possible to edit the master smart object and see all the changes applied at once.
Here I have a set of four layers—the white shape, the green square, the red circle, and the blue squiggles, which I have combined into a smart object. I then duplicated the smart object and applied different transformations to each one.
Now I double clicked on one of my four smart objects, and in the sub-document that opened, I moved the green square layer up, and added a new layer with a black yin-yang. I saved and closed the subdocument, and all four instances of the smart object in the main document updated with my changes.
The other cool thing that smart objects allows you to do is undo a transformation without losing any of the original resolution.
In this image, I took a raster graphic, duplicated it, and put one inside a smart object and left the other a regular layer. I transformed both of them the same way, and they looked identical. But when I transformed them each again, to try to regain the original shape, the smart object looked significantly better.
How to get smart objects
Select one or more layers in the layers palette, and ctrl-click or right click and select "Group into new Smart Object." Now, you are free to transform and duplicate this new object however you wish. (Note: To duplicate a smart object so that all instances update together, duplicate it in the layers palette as you would any other layer; to duplicate it so it is independent, use "New Smart Object via Copy" in the Layers Menu.) Now, when you wish to edit the original set of layers, double click the Smart Object in the layers palette, and it will open them in a new document. Save and close it when you want your changes applied to your main document.
Smart objects are an incredible tool to add to the arsenal of "safe photoshop practices." Always use adjustment layers, not direct adjustments; always do everything on separate layers; save important history states; use vector art for clean, scalable shapes and text; and convert layers to smart objects before transforming them. (There are certainly more, but these are the ones that jump to mind.)
A little sidenote:
This is a little animation I did using smart objects and the new Warp transformation. It's fairly ugly, but the point of it was to demonstrate another use of Smart Objects. I won't go into how it was done here,
View 9 Replies
View Related
Apr 7, 2009
I have created a smart object in cs2 to help me create a webpage, but when I transfer the file to image ready it says it does not understand the smart object. When I go back to photoshop it has turned my smart object into a flat image that can not be altered anymore. Can anyone help me or give me some advice with this please. I know its an older version of photoshop, but it dosen't make sense that they have not made the two programs compatible for smart images.Â
View 1 Replies
View Related
Sep 25, 2008
I am using version 8.0.
I now want to transform my layers into smart objects but don't know how to do this.
View 1 Replies
View Related
Dec 22, 2013
Using Revit 2014, I link in a dwg file. I open a view and using V/G overides for Imported Categories, I turn off the Acad layers I don't want to see. Then the next time my dwg file is updated, the V/G will remain the same and I won't have to reset the layer views. Now I duplicate this view for additional views I need in my project. But I need to apply a different View Template to each view. This destroys the original V/G settings that I had set up for the dwg file.Is there a way to set up my linked file so that it retains the layer on/off settings through each update and lock it. Then I can apply different View Templates to introduce other characteristics without altering the desired layer settings.
View 4 Replies
View Related
Jun 27, 2013
Whenever i try to add adjustment layers on my gifs, the result of the adjustment only comes in effect on the first frame, even when the adjustment layer is on the very top?
View 3 Replies
View Related
