Photoshop :: Printing Colours!
Apr 14, 2004
When I print from Photoshop, I am getting this message before the printing commences:
"Some PostScript specific settings (emmulsion, Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer"
Then when I print, the colours are all different than what is on the screen. I have not had this problem previously and everything I have printed looks great. This has only begun recently and I am not sure what has happened to make it like that. My printer is a hp deskjet 930C.
View 4 Replies
ADVERTISEMENT
Nov 21, 2005
Colour settings in PS are set to sRGB and the printer colour settings are set the sRGB too. The whole colour settings thing confuses me anyway but what could be going wrong?
View 8 Replies
View Related
Jul 1, 2013
I'm adapting a printer to print various conductive inks and such, however I need to ensure it only prints one 'colour' at a time. Is there a program that lets me print *just* from the magenta cartridge or *just* from the cyan, with zero mixing? I need a program that lets me do this and ideally I can input those values correctly.
View 2 Replies
View Related
Jul 18, 2013
When I want to send file separation containing only spot colours, sometimes it comes with empty CMYK separations printed.
Lets say an artwork may be only one colour, so when printed the outcome should be just that colour, but instead I end up with 5 separations printed - the one I wanted to print plus cmyk bits all blank (empty pages with only registration pieces imprinted).
Neither on artwork nor separation preview there's no process colours whatsoever, so do any of You know what may cause this?
I'm using the same print template and it happens form time to time. (not a problem for me but my colleagues complain about it all the time).
View 7 Replies
View Related
Aug 16, 2013
In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
View 2 Replies
View Related
Feb 7, 2014
I use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
example: [URL]...
Is there any way of avoiding this?
View 2 Replies
View Related
Apr 8, 2006
i'm working on a job with 2 colours. I already did this using CMYK and setting 2 of them to 100% and the other 2 at 0%. But people who press these posters say me that they always have to convert the CMYK file to a 2 colours file. Is there a way to set my colours to 2 colours instead of 4?
View 2 Replies
View Related
Oct 2, 2006
i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.
i really need to be able to tile print this in high resolution on film. anyone know what i can do??
View 1 Replies
View Related
Mar 27, 2012
I've tried looking this up but just get the mixer brush on every hit or. What I want to do is to take two colours, use the colour picker and mix the two colours to make a third.
I know I can arbitrarily change the opacity or by steps with the number keys but I don't to do it this way. I don't want to use a blur too or a filter. This is mixing colours basics. The mixer brush looks like it mimcs painting in one respect but its also creating muddy values.
View 4 Replies
View Related
Dec 17, 2012
In preparing some files for print I noticed that a .pdf generated bij PS5 has different colours than a .tiff.
Both files have been saved without colour profiles.
View 5 Replies
View Related
Jun 23, 2012
sort of like CS6, the dark menu has grown on me :P plus i thought it would match nicely with my dark firefox theme and dark GNOME interface AND my favour for dark BG designs.
I know i can change the background of the workspace, i've canged that to blue but my concern is more for the main GUI.
View 4 Replies
View Related
Nov 21, 2008
I have difficulty with is matching colours (in this case where two different colour skies join).
Is there a way to average them out so that they blend together better ?
View 7 Replies
View Related
Feb 12, 2006
I have a number of gradients that are currently blue and I would like to convert them to a green but keeping the same levels. Is there a way I can apply a filter of some sort to them?
View 2 Replies
View Related
Jun 16, 2006
how to edit the background colour, i usually just add another layer and set it as black. Is there a way that i can change the actual background layer to black or any other colours?
View 1 Replies
View Related
Jun 27, 2007
how do i give a command to photoshop to make everything that is black become grey like the one in the image?
how can i make the background transparent so this logo will look good on my flyers?
View 4 Replies
View Related
Jan 12, 2007
how to make two colours into one font?
View 1 Replies
View Related
Mar 9, 2009
I have the same photoshop installed on both my laptop and desktop. How i was working on an image on my desktop, saved it on usb to take away with me nd opened it up on my laptop, and now all the colours are completely different shades.
View 1 Replies
View Related
Apr 15, 2006
how to do it choose colours, it might sound stupid but i dont know what colours would match(go with each other) on a web page.
View 6 Replies
View Related
Apr 6, 2012
I'm getting a little frustrated that elements that i copy and paste (or open) in photoshop from Illustrator do not look the same, very muted, additionally when i come to save for web they look even worse. So i can never get the colours looking like the original unless (which isn't a solution) i change them manually by increasing the contrast ect.
All my colour settings/profiles are synced, the documents are both RGB. I just can't work it out
View 5 Replies
View Related
Feb 12, 2013
One some images, as I increase the resolution, black pixels appear. When the image fits the screen, I can't see anything but as I increase the resolution, these black pixels become very obvious, but only on certain colours, like the blue of this dress. CS5
View 2 Replies
View Related
Apr 16, 2013
a colleague has been working on a website and the below images show the files and colours they should be, but he has opened the files up again yesterday and the files show as per the second image (the colours have changed from blues to all black but with edges defined). The document was originally created in CMYK and brought from a PDF (I know, but it wasnt us!) so there may be some legacy there, but the only thing we could think of was a colour gamut or web colour warning, but changing those didn't seem to make a difference.
View 5 Replies
View Related
May 22, 2011
I am trying to replicate this background design and effect below. I also need to create a shadow effect below a character on a design, so what is the best way to do that.
View 8 Replies
View Related
Oct 7, 2008
I need to compare and match two colours but dont know how to do it exactly. the scenario is; I have two samples. Sample A is the reference, and Sample B is a trial. The trial sample is going to be very close to the reference, but not exactly the same colour.
What I am going to do is scan both samples on a scanner and then compare them. I need to find out what colours do I need to add/remove from Sample B to make it exactly same as Sample A. That is the most important bit; need to be able to understand which colours missing or needs to reduced.
Samples are one uniform colour but ideally need to get 3-4 sampling to get the average colour from each sample for accurate results.
View 2 Replies
View Related
Feb 28, 2006
I purchased a website template and I need to customise the colours of the graphics (Buttons, logos etc.) to match my specific colour scheme. When I asked the designers of the template for help they sent be a PSD file with a complete screenshot of the webpage and all the individual components.
I need to change the colours of each button and some graphics and I cannot find an easy way to do this. I have never used Photoshop before ( I have Photoshop CS2 and ImageReady CS2)
Also once the colour has been changed do I cut and paste the images? How do I save them as new individual files that I can upload to replace the standard template graphics? (They need to be exactly the same size as the originals).
View 2 Replies
View Related
Feb 25, 2006
Like changing the colour of a surface, but the surface has detail and i don't want to go over the detail, hair for instance, what would i use? something that covers the patch ?
View 1 Replies
View Related
Mar 30, 2004
I have an logo that has a brown background and a white foreground. How do I swap around the colours so that the background becomes white and the foreground becomes brown? Also is it possible to replace one colour with another colour. I am currently using Photoshop 6.
View 1 Replies
View Related
Jun 12, 2004
Im playing with doing some tee shirt designs on PS. Is there an easy way to get a full colour photo down to two or three colurs for screen printing purposes?
View 5 Replies
View Related
Nov 11, 2008
how color may influence a viewer visiting a website.
When visiting a website do you pay any particular attention to the color scheme? I.e. how well thought out it is and how it fits in with the overall theme of the website and its purpose?
Have you found that web designers tend to stick to pastel colors when designing female orientated websites? Or does anything go?
What would you consider to be the 'safest' color scheme which will work with practically any website and why?
View 1 Replies
View Related
Mar 20, 2007
I have attached an image of a font (Helana) I'm designing a logo in. As you can see it has lots of scrolls, flowers, leaves etc running off it... I'd like to keep the letter itself one colour, but make all scrolls, flowers, leaves etc are all different colours / shades...
I've tried to use live paint but it just changes the colour of the whole thing. Should I try Photoshop?
View 1 Replies
View Related
Jun 12, 2008
look at the area that contains the globe. Behind it there is a blurred swirl of colours.
how this colour-blur/blend effect is achieved? I've tried blurring but it looks really poor.
View 9 Replies
View Related
May 11, 2005
I have taken this image under poor lighting in a restaurant, and need to know how to best retore the colours in this lifeless image.
Yes, I know it ain't the greatest image - all I am hoping to do is remove the colour cast and get some of the natural colors in there.
I've tried tweaking it through "Selective colour", but this only seems to get me so far.
View 9 Replies
View Related
