I would like to have my image black and white apart from a specific section of the image,For example: A football pitch in black and white, apart from the football which remains in color, See link for an example: URL....
View 4 RepliesI use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
How to change the colour of a specific object in an image.
View 3 Replies View RelatedI've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View Relatedis it possible to change e.g. the picture this one in that way, that the basic color is lightblue, so I mean there is no other color than lightblue and the contures?
View 8 Replies View RelatedI am new in paint.net. I tried "red-eyes-effect" but the red eyes turn into blue or grey instead of black.
View 4 Replies View RelatedI have a picture of a shovel of which I want to change the red colour to blue.
What is the simpliest way to do this in Paint.NET?
I have tried many things things, but I get a lot of trouble with shadows and sun shine areas.
Attached Thumbnails
I have a jpeg image and would like to change the colour of 3 of the words on the image. The image is on a black background.
View 4 Replies View RelatedI need to alter the colour of the attached image to a gradient fill from blue to green (hex 283E90 to 9FCF6F)
The problem is every time I do this the image loses its sharpness (using magic wand, highlighting the area and filling a gradient and other similar techniques)
I want to change the colour of a picture frame (black) around the outside of an image and I am trying to use a (blue) from a 2nd image to do so. The 2nd image is an edited version of the !st image saved under a different name. PSPRo X .This is my work flow :-
1 Open 2nd image
2 Click the dropper tool on the 2nd image-the foreground colour in the met palette changes to that colour(blue)
3 Click on foreground colour box
4 Click on background colour box-wanted colour shows-OK.
5 Select flood fill tool
Then the foreground colour changes to white. Not doing step 4 ends up with white too.
I am trying to do a www logo with transparent text - colour of the text should change accordingly to web site background (image or solid colour).
I do not want to use Magic Wand as it degrade quality of the text.
I've tried to use 2 layers with blend mode set to multiply but it does not work for me if background was transparent (saved as PNG file)
I have a clipart picture, which has varying shades of black and white. How do I change the image to pink? I would like to keep the shading. Its a very intricate image of a crown.
View 4 Replies View RelatedI have a Black and White text logo which I want to invert/reverse the colours on. Yes it's that simple, but I can't get paint.net to do it. In the attached file, I need Black to be White, and vice-versa. Anything else needs to be left as it is.
View 2 Replies View RelatedI am trying to change one object of my picture to colour while the rest remains black and white.
View 4 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedI am working on a project in which I am trying to a achieve a superhero movie post type effect for tha background. I have a picture of building and a 100% opacity layer entirely painted the colour c5322c. The trouble is when I apply blending options, the red colour on the picture is no longer c5332c. It is absolutely necessary that I have the colour c5322c. Is there any way I can end up with the colour c5322c after using the blending options multiply, linear burn, overlay and vivid light? In other words, what colour do I have to start with on my other layer to achieve a product that has the colour c5322c? If the final result doesn't depend on the background picture (aka the building pictures), is there some sort of formula I can use or play around with the colours and blending options?
View 1 Replies View RelatedHow to change the shape of an image to fit a specific shape.
What I'm trying to do is reshape a geometrically patterned rectangular image so that the printed image fits around a truncated cone. I'm trying to use the image to create a stencil for glazing a straight sided pottery cup. I know the circumference of the rim and the circumference of the base of the truncated cone so I need to wind up with the borders of the image having a convex curve at the top with the arc length equal to the rim's circumference, a concave curve at the bottom with the arc length equal to the circumference of the base, and with the end points of both arcs connected with diagonal lines equal to the length of the sides of the cup. In addition, I'd like to preserve the image in it's entirety, but distort it as necessary to fit the borders without cutting any of it out. (I attached a sketch in case my pattern shape description was confusing).
How do you change Mtext to A specific style so it always opens up that way.
View 2 Replies View RelatedI'm trying to create an action to change two specific colors in ~300 different logo files (.ai and .eps). I'm coming from Photoshop so I assume there is a way to create a droplet from an Illustrator Action but that's a different topic.
The colors are Pantone 143 and 287 which need to be changed to 143 U and 287 U, respectively.
Here are the steps that I think I need to record for my action: Unlock all layersAdd new colors to swatch boardSelect all layersRecolor Artwork... (Edit -> Edit Colors -> Recolor Artwork... This step is not recorded?)Save file The problem is that the Recolor Artwork step is not recorded.
I am trying to print an image to an exact size but can't seem to get it right. I am using the resize tool but the image always appears cropped at the edges. The image is a circle. Is there a way to determine the exact size before printing?
View 3 Replies View RelatedIf LR 5 included the ability to undo a specific change fro the history panel? This ? was asked in 2007, undoing "#3 out of 50". At present, would have to CTRL Z all the way back OR manually adjust all slider bars.
View 1 Replies View RelatedRight now my program opens to the "manage" screen. I changed it way back when, due to freezing issues. It's freezing more and more now and just recently started showing a HUGE preview screen on the right. Not sure what I did to cause this but I'd like to change it back to opening to the Edit screen.
View 2 Replies View RelatedI am trying to get rid of a specific color and replace it with black, the color is all over the picture in different parts. I recently came across this program and it almost worked. It got rid of the color but replaced it with white. How do i get it to replace it with black. Is there another program?
View 2 Replies View RelatedI am working on creating a banner for a website and I am looking to use a couple colors from which is included on a jpeg that is provided for me, its been forever since ive tried creating anything and i wonder is there some way i can take the colors from the jpeg to use in my own color palette .
View 2 Replies View RelatedI have been trying to make a forum signature, and I am using an effect that as a "side effect" makes the background black.
Is it is possible to turn the black background into transparency using a PDN feature or a plugin?
I have a brother printer that no longer prints the magenta ink. I have tried and tried to fix it, and cannot figure it out. So, Since i would like to continue using the printer, and still need to print in color, I was hoping maybe there would be a way to remove the red from a picture before i color it.
Now, i understand it is more complicated than just finding all the red in a photo and simply removing it or changing the color. Any color that the printer needs Magenta ink to print is going to come out funny, unless I can find a way to change any color that would require the magenta ink.
I often use Paint.NET while creating documentation for users of various computer applications, mainly working with screenshots. For awhile I've thought that instead of simply circling a spot on the image and labelling it with an arrow, it would might better to 'pull' that section of the image up, so that it appears larger and in-front of the rest of the image.
I created a crude mock-up of what I'm trying to accomplish:
Is there a way to make rectangle with a specific width / height?
View 2 Replies View RelatedWhen i work on a image in photoshop cs5 then save it to a folder ready for printing there is a dramatic colour change.
View 1 Replies View Related