Photoshop :: Print Preview Colors Don't Match Work Window + Print Sizes
Jan 16, 2009
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View 4 Replies
ADVERTISEMENT
Jul 8, 2013
Here's the screen shot. If I ignore the preview, and set with the print area tool, I get what's in the print area tool. Something is amiss in the land of tiling settings, but I can't get to whatever setting is messing this up.
View 1 Replies
View Related
Jul 7, 2013
Just wanted to print a new photo and realized that the colors in print preview do not match the colors in soft proofing. In both cases I selected the same icc profile and rendering method. The print colors matched the colors in print preview. I never had a problem so far. All new prints will be checked with soft proofing and adjusted when necessary. I never paid attention to the color rendition in print preview and all prints perfectly matched the colors from the soft proofing. I was surprised when my print came out of the printer and the colors weren't matching the soft proofing colors, but that of the print preview.
I don't understand why Photoshop renders the colors differently in the first place. See attached screenshot for the difference in the blue/cyan colors. I don't care if the print view colors will match the print, but I do care when soft proofing is not working.
View 2 Replies
View Related
Jul 24, 2013
I tweaked an image in Develop and printed some 5x7s until I got it right and then went to 13x19 (first time ever using that size with my R3000). The print preview and the print were way too red. I went back to a 5x7 and it was way red as well in print preview, so I didn't print. I replaced a light magenta cart that I think ran out during the 13x19 print, and then some others that were low, and did a nozzle check and that was okay. I have spent hours looking around all of the settings (sRGB) and can find nothing that would explain what changed between my last good 5x7 print and the red 13x19. I went back to earlier versions and had the same problem. Monitor is due for recalibration, but that probably has nothing to do with it since it changed so suddenly.
R3000, LR 4.3, Win 7, NEC PA 271w
View 4 Replies
View Related
Jul 12, 2013
I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.
When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.
Preview and pdf attached.
C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
View 2 Replies
View Related
Nov 18, 2012
How can I get my image to center in the Print Preview window? (Epson R2000, 12 x 12, borderless). No matter where or how I change the settings, the Print Preview window shows my image has been cut off on the right hand and bottom edges. Hence, I cannot get a 12 x 12 borderless image to center on a 12 x 12 sheet of scrapbook paper.
View 7 Replies
View Related
Jun 6, 2009
How do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
I have been unable to find any documentation on this subject.
View 2 Replies
View Related
Nov 1, 2012
I am ready to print my stuff. But I have to manually use the pick tool in the print preview window to move my pages around so that they will print the stuff in the center of the pages.
I do my print run. And then save the "Print style".
Come back the next day and I have to re-do all the adjusting of the work again so that it all gets printed. I would have thought that saving a print style would make it so that next time everything is the same as before.
View 2 Replies
View Related
Oct 19, 2011
I am wondering, if is possible to move content of print preview window. View picture for better understanding. In version X4 it was possible.
View 1 Replies
View Related
Sep 27, 2011
I'm using AutoCAD Map 3D 2009.
I've created a simple drawing in CAD that contains a cropped JPEG, a two toned hatched polygon in behind it two MTexts overlaying all.
I cannot view them in either normal plotting, pdf format, jpeg format and even dwf.
I've increased the ram used in the "Raster Extension Options" (2000 MB), I've set the plotting in the "Process Document" to "...In computer", I've saved it in older formats (2000/2004/2007), I've placed the drawing on both our public drives as well as the local, I've adjusted the "Raster and Shaded/Rendered Viewports" & "OLE" settings in the "Device and Document Settings" (None to Best). Not to mention the other variations in the plot menu.
I've tried everything I can think of and have read through several threads here and nothing works.
What drives me nuts about this, is that I'm able to print from a layout with no problems a 3D drawing, with 2D hatching, an extensive title block with hatching and a secondary overall viewport (minimal detail) in the main viewport area.
View 6 Replies
View Related
Jan 8, 2014
I received an Autocad file from another person, opened it with Autocad 2011 LT, and it looks fine. But when I go to print preview all the lines are very thick, making the detail of the drawing difficult to see. I've tried manually changing the lineweights but it has no effect on some of the layers. Is there an easier way to fix this other than recreating layers?
View 1 Replies
View Related
Feb 26, 2013
This file will crash when I try to print or print preview.
[URL]
No problem printing other files.Btw, from Document Properties, it shows that there are two RGB fills, which I cannot find.
That's the reason why I go into Print Preview to look at the separations.
View 7 Replies
View Related
Jul 28, 2011
I'm running Windows 7 64Bit running Adobe CS5 Master Collection. But ever since I allowed CS5 Photoshop to control my printer (HP Photosmart Prem 310-C) to do a test print of a graphic that I created all of my Blues print a violet/blue color, no matter what color blue. It has even affected MS Word & MS Project when I try to print blue colored font or Gantt Chart blues will no longer print blue, but will print the same blue/violet color. I've even tried a brilliant blue which will all view great, but prints the same shade of violet blue! All my colors and Blues will view great! I've calibrated my monitor and I've reset my printer several times and still the same thing! I never had this problem before I downloaded Adobe CS5! A strange thing is that I can run check printer test and the data & image that is stored in the printer will print blues perfect, including running a copy direct from the scanner bed and it will produce perfect blues. I almost feel as though Adobe CS5 has possessed my PC and printer, how do I get it back to printing like it did before installing CS5 Master Suite?
View 2 Replies
View Related
Jan 20, 2012
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies
View Related
Sep 28, 2013
I have CS6, Epson 3880 printer. Both monitor and printer have been calibrated. When viewing a pic that I wish to print, I go to view, proof setup and chose printer and paper, preserved RGB box is check. This gives me a proof, which is very accurate to what is actually printed. Here's my problem: There is a color change when viewing the pic in proof print mode, which is what in fact, gets printed. Most of the color change involves alteration in red. A red bowl is changed to a brownish read bowl for example. I have been unsuccessful in trying to match the proof to the original color scheme. I've played with hue, color mixing, all to no avail. Is there an easy way to match colors original pic and proof/print?
View 7 Replies
View Related
Jul 24, 2013
I have a picture package I want to create. This needs to be the same image on different sized outputs. But you can only create a print package with one custom file size. Is there a way of setting LR to print to different sizes?
I know I can select page size as master size, and print with different sized cells on each page, but I actually want the page size to be different.
For example
page 1 = 8x10 page size, with 8x10 cell
page 2 = 8x12 page size with 8x12 cell
page 3 = 8x6 page size with 8x6 cell
page 4 = 8x6 page size with 2 of 4x6 cells.
I single image, printed on 4 different size pages...
Could you modify the LRtemplate file? Its the global settings bit that concerns me, I dont want a global setting of
_globalSettings = {customFileHeight = 576,customFileWidth = 432,I could do with these file dimensions different for each print.
Can it be done?? has it been done??
even if itspeople pointing me towards different software.
PS - I'm using LR4 but LR5 doesnt have this option either.
View 1 Replies
View Related
Dec 3, 2011
I am new to Lightroom. I give my clients their pictures on a cd/DVD to take to their prefferd printer and make prints in whatever size they like. However, I have been readings some forums and am confused about how to export my pictures so that they can be printed at any size but without having heads or feet cut off during enlargements,etc. basically, how should I export my pictures do that they can be printed at any size ( 4x6 or 8x10 pr even larger)without any loss of image. I currently have it set at 300 dpi and no sharpening because I do my sharpening in Lightroom.
View 8 Replies
View Related
Aug 20, 2013
When trying to scale the print size, after clicking inside the scale box, the sizes just keep increasing, even though I never got a chance to enter anything.It just keep getting bigger and bigger. How do I turn this "feature" off?
View 3 Replies
View Related
Dec 7, 2012
how do i find kodak galler in photoshop elements 10 - in the create programme only shows flat print card sizes and none for folded card
View 1 Replies
View Related
Jun 9, 2011
Is it possible to add a custom paper size to Gimp? I have a new HP wide format printer and was looking for a capability to customize the paper size. Hewlett Packard and Microsoft have said that the customization of paper size is application specific even though Microsoft tells you can customize paper size through server properties , which on my XP machine will not save the custom settings.
Note: This page, even though it is not a Microsoft page, shows what Microsoft tells you to do. [URL]
View 6 Replies
View Related
Dec 31, 2012
So in CS5 we were able to print to the custom sizes we created in the print screen for our HP Z3200, but for some reason we haven't been able to use the custom sizes in CS6, you click on a custom size and when you say ok from the printer settings and it goes back into Photoshop print settings it binks back to 8.5x11. You can use the standard sizes that came with the HP print software, but not any custom sizes you create. Is there a setting somewhere in Photoshop that I need to change?
View 4 Replies
View Related
Sep 23, 2004
I`m using AutoCAD2004 with HP Designjet 800 Plotter.
The Plotter is connected to network.
I want to add some Custom Paper Sizes, however, when I open the options for the plotter(User-defined Paper sizes&calibration), I can`t add or modify paper sizes. The `Add` button is not available.
I set my computer to `Power Users` but still cant add. How to make the `Add` or `Delete` buttons usable?
View 2 Replies
View Related
Feb 10, 2013
We are looking for an easy straightforward way to print / export an entire set of sheets to pdf.The sheets have different papersizes and we want them to be named with the sheet number + name, and possible a prefix by choice.We have Adobe Acrobat X installed as pdf printer.So far we managed to print an entire set to pdf with these somewhat annoying issues:
1. The naming adds the word "sheet" between the chosen prefix and number-name.can we get rid of this?
2. The prints seem only to follow the actual Revit Print-setup, on papersizes.Which means that we need to have print-sessions on every paper size used in a project.Strange that in Revit the paper print-setup, doesnt follow the sheet definitions.(?)Is there a way within Revit to solve this to a more automated workflow?Or do we have to implement third party plugiins / solutions?
View 3 Replies
View Related
Jan 6, 2013
I switched from Photoshop Elements 7 to Photoshop Elements 10. I cannot get a print of a photo that matches the screen. Photos are dark and red. I cannot edit the photos because I do not know what will print out. I have switched back to Photoshop 7 and my photos print fine, just as they have been edited.
View 3 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Oct 25, 2011
when I select the printer/name: Adobe PDF
under Paper size: the standard Arch sizes are not there...
2013 Civil 3D
View 6 Replies
View Related
Mar 20, 2014
I have created a file in illustrator 23in x 67in which is 137mb how can I reduce this as small as possible to be able to print it, as when I save it as a pdf it reduces to 27mb which is still to large.
View 6 Replies
View Related
Feb 25, 2011
Dialog box:"The active document uses multiple page sizes Print Booklet works only with documents that use a consistent page size."OK, but the page sizes are all the same.
View 26 Replies
View Related
May 9, 2004
Print with preview is not working anymore. Any Ideas why it may have stopped working? I am trying to open jpg's Using PS 7
View 4 Replies
View Related
May 24, 2013
Ok. I have a problem with colors not matching between Illustrator CS5 documents. I am often emailed documents with pantone colors selected in them. Later, sometimes I need to create another document using those same pantone colors. The problem is, these two documents print the pantone colors differently. In fact, on my screen the file colors look different side-by-side. I figured it was a color settings or color profile issue, so I went in and checked both files. Everything was the same (Working CMYK: U.S. Web Coated (SWOP) v2, Settings North America General Purpose 2, CMYK Preserve Numbers (Ignore Linked Profiles)) . When I paste pantone samples from one document into the other, they match what's in each other's documents, but the two documents themselves don't look the same and don't print the same.
What color setting could I be overlooking to cause this difference? I don't particularly care if they match on-screen, but it's the fact that they actually print different colors from the same pantone swatch that is the trouble. A blue pantone from one file will print purple from a different file.
View 3 Replies
View Related
Oct 29, 2012
When printing I unchecked center image in PScs5 and reduced the size of my image, using the achor in the preview window, to run a test print. I'm printing to an Epson 3880. Once I ran the test print, I returned to PS and my original image. Selected print and only the preview of the test print is there. The orginal sized image will not load in the preview window. I have deleted the PS preferences and restarted twice. Even after moving to another machine, the profile seems to be embedded in my image. The same preview image is on the three machines I moved to.
View 2 Replies
View Related
