Photoshop :: Print Color Match
Sep 28, 2013
I have CS6, Epson 3880 printer. Both monitor and printer have been calibrated. When viewing a pic that I wish to print, I go to view, proof setup and chose printer and paper, preserved RGB box is check. This gives me a proof, which is very accurate to what is actually printed. Here's my problem: There is a color change when viewing the pic in proof print mode, which is what in fact, gets printed. Most of the color change involves alteration in red. A red bowl is changed to a brownish read bowl for example. I have been unsuccessful in trying to match the proof to the original color scheme. I've played with hue, color mixing, all to no avail. Is there an easy way to match colors original pic and proof/print?
View 7 Replies
ADVERTISEMENT
Nov 13, 2012
Is there a way to control color print quality that matches the in-canvas look of a part or assembly.
As a quick example, I have a Kelly Green wire visible within an assembly. When I print the assembly within a .idw drawing file, the Kelly Green turns very dark.
Is it possible to specify a particular lighting setting to be used when printing? I'm expecting to see color print output that matches closely to what I see when viewing either a model or an assembly.
I'm using Inventor 2013.
View 3 Replies
View Related
Jan 16, 2009
So I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
View 4 Replies
View Related
Feb 24, 2014
Some of the lighter, saturated colors in the PANTONE+ swatches library appear to be a different color in the swatch list than they are when applied to a design. see below for screen shots.
i can duplicate this situation on calibrated NEC MultiSync monitors and uncalibrated laptops. We are running on Mac OS X.8x and above.
Designers are complaining about not being able to pick a color from the Swatch Library in AICS6 or AICC. InDesignCC does not seem to have the same issue.
View 1 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Jun 17, 2013
Is there a way to change the color of the Vignette to match the page background color. It appears to that only Black is available at this time.
Is there a transparent vignette available anywhere .
View 1 Replies
View Related
Feb 11, 2012
I have something like 1,850 photos, taken in RAW and later converted to DNG, to create a stop motion. All the photos were taken with the same camera (Canon 5D Mk II) and most of them with a 24-70L. All were taken in the same lighting conditions (in an interior, with the house lighting from flourescent lights) and the same day, in a period of maybe 2 or 3 hours. Each "take" was with the exact same camera and exposure parameters.
When processing the photos in Lightroom (using the LR4 beta) I can see some minor but very noticeable differences between color an exposure in the photos of the same "take". The exposure can be more or less automatically corrected by the Matching total exposures (although I think this doesn't work when the exposures are really similar, but there are some subtle differences like in this case, say, something along ~1/5 stop or so), but I haven't found how to try to match the white balance. All of the photos have already been set to a specific WB (I took a ColorChecker Passport at the beginning of the session), but there are still some differences between some of the shots. Some of them look a tad more greener. I blame the flourescent bulbs, but I'm not sure of the real cause.
So, the question is: is there a way to match the color balance of a series of photos to a target one? I really don't want to go photo by photo setting the white balance manually. Is there a tool like the Match total exposures, but for color balance? I have already tried with the automatic white balance, but the problem is that the decided WB for the photos is not the one I need, and I need to have the same WB for all the session, and this could change from different takes. The difference between shots is usually around 4 or 5 "points" in the Tint scale, some are with Tint +11, some with +15.
Or any other tool that could process this after? At the end I'll use JPGs to create the stop motion, so if there is a tool that could process the exported jpgs it could work too.
View 2 Replies
View Related
Jan 6, 2013
I switched from Photoshop Elements 7 to Photoshop Elements 10. I cannot get a print of a photo that matches the screen. Photos are dark and red. I cannot edit the photos because I do not know what will print out. I have switched back to Photoshop 7 and my photos print fine, just as they have been edited.
View 3 Replies
View Related
Nov 5, 2005
Been messing around with photoshop now for a little bit, but I can't seem to find the correct adjustments, or filters to get anywhere near as the desktop in "40910".
View 8 Replies
View Related
Jul 24, 2013
I tweaked an image in Develop and printed some 5x7s until I got it right and then went to 13x19 (first time ever using that size with my R3000). The print preview and the print were way too red. I went back to a 5x7 and it was way red as well in print preview, so I didn't print. I replaced a light magenta cart that I think ran out during the 13x19 print, and then some others that were low, and did a nozzle check and that was okay. I have spent hours looking around all of the settings (sRGB) and can find nothing that would explain what changed between my last good 5x7 print and the red 13x19. I went back to earlier versions and had the same problem. Monitor is due for recalibration, but that probably has nothing to do with it since it changed so suddenly.
R3000, LR 4.3, Win 7, NEC PA 271w
View 4 Replies
View Related
Apr 2, 2004
whats the best/easiest and effective way to paint or adujst the color so that the blue of the car is also the color of the front end? Basically I want to make the whole car blue.
View 4 Replies
View Related
Jun 11, 2007
how can I extract the color palette of an image?
i want to save the palette and use it with another picture to have the same color-palette on two different images.
The "match color" tool comes close to the result i want to have...but it works with the contrast too and adds colors that i don't want..I JUST want to work with the available colors... simply extract a color palette from an image and use it with a second one to get them match...(without adding something)
I found some tools to do this with 256 color images but I want to to this with my 8bit or 16bit files from my camera.
I think it's a simple answer but I can't find it....I hope someone can help me....
View 2 Replies
View Related
May 31, 2004
I've been playing around with this photo I have, I extracted a person's head and placed it in another image on someone else's body.
What's the best way to adjust the skin color on the face to match the skin tones on the other image's body to make it look natural?
I've tried using Photoshop CS's "Match Color" feature but it still doesn't look that natural.
View 5 Replies
View Related
May 24, 2013
Ok. I have a problem with colors not matching between Illustrator CS5 documents. I am often emailed documents with pantone colors selected in them. Later, sometimes I need to create another document using those same pantone colors. The problem is, these two documents print the pantone colors differently. In fact, on my screen the file colors look different side-by-side. I figured it was a color settings or color profile issue, so I went in and checked both files. Everything was the same (Working CMYK: U.S. Web Coated (SWOP) v2, Settings North America General Purpose 2, CMYK Preserve Numbers (Ignore Linked Profiles)) . When I paste pantone samples from one document into the other, they match what's in each other's documents, but the two documents themselves don't look the same and don't print the same.
What color setting could I be overlooking to cause this difference? I don't particularly care if they match on-screen, but it's the fact that they actually print different colors from the same pantone swatch that is the trouble. A blue pantone from one file will print purple from a different file.
View 3 Replies
View Related
Dec 5, 2012
My color settings are synchronized across all CS applications. I'm trying to see document both as a soft proof and not. Neither mode improves the color differences I'm seeing on screen. Photoshop displays color TOTALLY differently from all other CS applications: Bridge, InDesign, Illustrator & Acrobat.
In the image below, Indesign is on the left. Photoshop is on the right. Image appears in Bridge, Acrobat and Illustrator just like InDesign.
View 3 Replies
View Related
Apr 12, 2013
whats shortcut key for color match tool?
View 6 Replies
View Related
Sep 30, 2012
I used a web hex code to match up a color in a logo. (8700ff). However, now that i am in the process of designing its seems that my PS hex values are not the same as web hex values. Is there a setting that i need to get into to make these match?
Look at the words '' SILVER & HD CAMERAS '' as compared to the words '' The Buffalo Nickle ''. These both are set at a hex value of 8700ff. The color of "HD CAMERA" is correctly matching the site logo which was made in PS cs5. But the sites interpretation of that same Hex value is different.
View 10 Replies
View Related
May 12, 2009
I am pasting a layer to an image and If I want the brightness and color of the layer to match with the brightness and color of the target image, then what is the best and quickest way to do so?
View 2 Replies
View Related
Nov 6, 2007
I am trying to match the color.
The original is the manufacturer's, #1.
Shot at 2007-11-06
My photo is the yellowish, this is my original photographed image, #2.
Shot at 2007-11-06
The third is my closest attempt to color correct: (Color Balance: Midtones- Red +10, Green +40, Blue +72, Shadows- Cyan -5, Green +8, Blue +13, Highlights- Cyan -4, Green +5, Blue +12), #3.
View 5 Replies
View Related
Jan 24, 2014
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
View 5 Replies
View Related
Jun 23, 2012
I have to deal with multiple layer documents for producing underwater mosaics. Very often, the images vary in colors a bit. For large mosaics, I run the images thru a batch job before I use them. For smaller mosaics (e.g. just 10 to 20 images), this is a bit of overkill, in case I have to tweak just 5 or 10 or so.
In this case, I prefer picking one of the 20 layers as my "reference" and manually match the colors of those layers, that need the match, one by one.
My question now: Is there a way, that I could select, lets say 10 layers that need the match and apply the Match Color to all of them in one go?
View 3 Replies
View Related
May 27, 2013
I am a mixed media artist/art teacher and I pay a local printer to adjust the colors of my work via Photoshop so that the final print matches the colors in my original artwork. I would like to learn to do this myself, but I have no clue which product I need to purchase or how to get started.
View 1 Replies
View Related
Nov 16, 2008
I made a simple panel in photoshop and used the #number for the color selected to fill one side of the panel in my CSS code. When the page is rendered there's a very slight difference between the panel and the background which I expect to be exactly the same.
View 10 Replies
View Related
Jul 17, 2006
I want to adjust the colors in this image so that "Red" is red, "Blue" is blue, etc:
(I have a larger version of the image that I am using,)
View 1 Replies
View Related
Jul 8, 2013
Here's the screen shot. If I ignore the preview, and set with the print area tool, I get what's in the print area tool. Something is amiss in the land of tiling settings, but I can't get to whatever setting is messing this up.
View 1 Replies
View Related
Jul 12, 2013
I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.
When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.
Preview and pdf attached.
C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
View 2 Replies
View Related
Oct 7, 2013
how do i match on screen document size to view print size? when i create a new document and put in its dimensions when i press view print size it appears alot smaller on screen
View 4 Replies
View Related
Jul 15, 2009
how to use the match color tool to automatically convert one grayscale image into multiple output images based on a collection of color swatches? Or a better process to achieve this automated?
I have all the swatches in psd files in one directory. I can do them one-by-one but I was wondering if there was a way to automate this process and have it spit out and save the different images automatically based on the saved swatch colors.
View 4 Replies
View Related
Sep 18, 2012
x4x6 settings.jpg
How to get x6 to match these settings had in x4?
I can just make a couple adjustments to come close.
Attached are current settings.
View 8 Replies
View Related
Feb 9, 2013
I had to make a flyer for an event i'm organizing. Found a low quality picture online which i used as background, asked the photographer if i could use this picture, and asked for that picture in high res. I received the high res picture after the deadline for the flyer, so i was forced to make a temporary flyer from the low quality picture. I made some changes to the brightness/contrast of the picture, and might have changed other color setting or used effects, but i can't remember which settings i changed nor the values i changed it to. Is there a way to retrieve this information from the picture/gimp so the colors for both images are exactly the same?
Flyer & original picture attached as example.
Attached File(s) AeroBcupfinalsmall.jpg (80.06K)
Number of downloads: 9 AeroBEsmall.jpg (250.22K)
Number of downloads: 10
View 2 Replies
View Related
Jul 19, 2012
David Boxing_WIP.png (202.28K)
Number of downloads: 19
Could I have a description of how to match the skin color of the head to the boxer's skin color?
View 1 Replies
View Related
