GIMP :: Match Color Settings
Feb 9, 2013
I had to make a flyer for an event i'm organizing. Found a low quality picture online which i used as background, asked the photographer if i could use this picture, and asked for that picture in high res. I received the high res picture after the deadline for the flyer, so i was forced to make a temporary flyer from the low quality picture. I made some changes to the brightness/contrast of the picture, and might have changed other color setting or used effects, but i can't remember which settings i changed nor the values i changed it to. Is there a way to retrieve this information from the picture/gimp so the colors for both images are exactly the same?
Flyer & original picture attached as example.
Attached File(s) AeroBcupfinalsmall.jpg (80.06K)
Number of downloads: 9 AeroBEsmall.jpg (250.22K)
Number of downloads: 10
View 2 Replies
ADVERTISEMENT
Nov 13, 2012
Is there a way to control color print quality that matches the in-canvas look of a part or assembly.
As a quick example, I have a Kelly Green wire visible within an assembly. When I print the assembly within a .idw drawing file, the Kelly Green turns very dark.
Is it possible to specify a particular lighting setting to be used when printing? I'm expecting to see color print output that matches closely to what I see when viewing either a model or an assembly.
I'm using Inventor 2013.
View 3 Replies
View Related
Jun 10, 2011
I have tried unsuccessfully to figure out how to color match in GIMP. I found a tutorial for photoshop, but for whatever reason I cannot translate it to GIMP. Tutorial is here:
[URL].......
I am designing wedding invites for my sister's wedding, and want to match the color of her preferred flower to the flower bunch I'm placing on her invite. This is the bunch I'm using:
This is the color I need to apply to the bunch I'm using:
View 5 Replies
View Related
Jun 5, 2013
I did put a real photo in the background of my website to fit entire page. So the text of my webpage is black, and sometimes other colors. So what happen is that some times the text is hard to read when it come on top of dark places of the photo (for example hear of people). So i want to adapt the photo to make it more unicolor, more whiten (increase whiteness) so the black text will appear even better.
What tools and filters in gimp that give me this ability to do that ?
View 2 Replies
View Related
Jul 19, 2012
David Boxing_WIP.png (202.28K)
Number of downloads: 19
Could I have a description of how to match the skin color of the head to the boxer's skin color?
View 1 Replies
View Related
Feb 26, 2014
I am having an issue exporting my sequence which contains final AIFF mix (24 bit 48 kHz) into a 'same-as-source' ProRes 422 file with 24 bit audio. I am specifically trying to export media with 'Match Sequence Settings' checked to create an identical output of what my sequence is. I wind up only creating a PR422 with 16 bit audio rather than 24 bit audio.
My sequence contains ProRes 422 media and 24 bit AIFF final stereo mix (1 audio file) from our Sound department.
My sequence is currently setup as "Custom" at 1920x1080, 23.976 fps, Square Pixels, Progressive, etc. Audio is 48 kHz (I don't see an option for choosing different bit rates in the 'Sequence Settings').
Using 'Match Sequence Settings', my options to alter the audio are "greyed out" and unavailable. I'm not sure why 'Match Sequence Settings' doesn't recognize that I am cutting with 24 bit audio and, instead, only exports 16 bit audio.
View 1 Replies
View Related
Jan 16, 2013
I built a new computer, Windows 8, 64 bit.
Installed Acad LT 2011 64 bit.
Did an export of custom settings from a Windows 7 64 bit LT 2011 installation, imported those to the new Windows 8 LT 2011 installation. This was done using the Start>Programs menu. (I ditched the "Metro" stuff.)
The setup looks mostly the same, but when I go to use it, the icons don't match the commands. I have toolbars down the left and right sides with many icons. The icon for Hatch runs the Polygon command. The Move icon runs the Offset command. Lots of them are screwed up.
The ribbon commands along the top seem to be OK.
View 2 Replies
View Related
Feb 24, 2014
Some of the lighter, saturated colors in the PANTONE+ swatches library appear to be a different color in the swatch list than they are when applied to a design. see below for screen shots.
i can duplicate this situation on calibrated NEC MultiSync monitors and uncalibrated laptops. We are running on Mac OS X.8x and above.
Designers are complaining about not being able to pick a color from the Swatch Library in AICS6 or AICC. InDesignCC does not seem to have the same issue.
View 1 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Jun 17, 2013
Is there a way to change the color of the Vignette to match the page background color. It appears to that only Black is available at this time.
Is there a transparent vignette available anywhere .
View 1 Replies
View Related
Feb 11, 2012
I have something like 1,850 photos, taken in RAW and later converted to DNG, to create a stop motion. All the photos were taken with the same camera (Canon 5D Mk II) and most of them with a 24-70L. All were taken in the same lighting conditions (in an interior, with the house lighting from flourescent lights) and the same day, in a period of maybe 2 or 3 hours. Each "take" was with the exact same camera and exposure parameters.
When processing the photos in Lightroom (using the LR4 beta) I can see some minor but very noticeable differences between color an exposure in the photos of the same "take". The exposure can be more or less automatically corrected by the Matching total exposures (although I think this doesn't work when the exposures are really similar, but there are some subtle differences like in this case, say, something along ~1/5 stop or so), but I haven't found how to try to match the white balance. All of the photos have already been set to a specific WB (I took a ColorChecker Passport at the beginning of the session), but there are still some differences between some of the shots. Some of them look a tad more greener. I blame the flourescent bulbs, but I'm not sure of the real cause.
So, the question is: is there a way to match the color balance of a series of photos to a target one? I really don't want to go photo by photo setting the white balance manually. Is there a tool like the Match total exposures, but for color balance? I have already tried with the automatic white balance, but the problem is that the decided WB for the photos is not the one I need, and I need to have the same WB for all the session, and this could change from different takes. The difference between shots is usually around 4 or 5 "points" in the Tint scale, some are with Tint +11, some with +15.
Or any other tool that could process this after? At the end I'll use JPGs to create the stop motion, so if there is a tool that could process the exported jpgs it could work too.
View 2 Replies
View Related
Feb 23, 2012
Photoshop CS5 v12.1.
Mac OS 10.6.
I'm printing to an Epson R1800 printer.
Print. Choose Color Management. Choose Document. Choose "Photoshop manages color". Choose the correct printer profile that matches the paper I'm using. Choose Relative Colorimetric.
THEN, I click Print Settings...under the 4th drop downu I choose "Print setting..." again. Under "Basic" "color" and "Color settings" are grayed out as are some of the "Media Type" options.
Is this normal? The problem is my black and white prints are printing really badly. They have color tones. I've cleaned the nozzles on my Epson printer, done everything the print utility suggests. All the test prints look fine.
View 3 Replies
View Related
Jun 12, 2012
I'm trying to recreate a bunch of IV-Studio settings to match a bunch of renders made by previous staff that did not leave behind the assembly files they used to make them in the first place.
I've ran into a problem with some parts displaying incorrectly. (they display incorrectly in the render/in the studio environment/ in the assembly/ and when in the part file) I've played with material and appearance styles but they have no effect, I've also tried quality/performance/compatibility hardware modes.
We have 5 or 6 parts that share the ridge pattern that is causing problems and they are affected in the same way.I'm running XP(32), IV2012-sp2, fx1800 with 6.14.0012.6570 drivers.
View 9 Replies
View Related
Nov 5, 2005
Been messing around with photoshop now for a little bit, but I can't seem to find the correct adjustments, or filters to get anywhere near as the desktop in "40910".
View 8 Replies
View Related
Sep 28, 2013
I have CS6, Epson 3880 printer. Both monitor and printer have been calibrated. When viewing a pic that I wish to print, I go to view, proof setup and chose printer and paper, preserved RGB box is check. This gives me a proof, which is very accurate to what is actually printed. Here's my problem: There is a color change when viewing the pic in proof print mode, which is what in fact, gets printed. Most of the color change involves alteration in red. A red bowl is changed to a brownish read bowl for example. I have been unsuccessful in trying to match the proof to the original color scheme. I've played with hue, color mixing, all to no avail. Is there an easy way to match colors original pic and proof/print?
View 7 Replies
View Related
Sep 18, 2012
x4x6 settings.jpg
How to get x6 to match these settings had in x4?
I can just make a couple adjustments to come close.
Attached are current settings.
View 8 Replies
View Related
Apr 2, 2004
whats the best/easiest and effective way to paint or adujst the color so that the blue of the car is also the color of the front end? Basically I want to make the whole car blue.
View 4 Replies
View Related
Jun 11, 2007
how can I extract the color palette of an image?
i want to save the palette and use it with another picture to have the same color-palette on two different images.
The "match color" tool comes close to the result i want to have...but it works with the contrast too and adds colors that i don't want..I JUST want to work with the available colors... simply extract a color palette from an image and use it with a second one to get them match...(without adding something)
I found some tools to do this with 256 color images but I want to to this with my 8bit or 16bit files from my camera.
I think it's a simple answer but I can't find it....I hope someone can help me....
View 2 Replies
View Related
May 31, 2004
I've been playing around with this photo I have, I extracted a person's head and placed it in another image on someone else's body.
What's the best way to adjust the skin color on the face to match the skin tones on the other image's body to make it look natural?
I've tried using Photoshop CS's "Match Color" feature but it still doesn't look that natural.
View 5 Replies
View Related
Feb 10, 2010
If I create a new image all works fine.
If I open an image that I have previously created (I'm working with .gif) and then select a colour on the pallet (it can be either FG or BG) and then try to place the colour on to the image - the colour is different to what I selected on the pallet.
I have the same issue with the 'bucket fill tool' or by selecting 'edit/fill with FG color' or by selecting 'edit/fill with BG color' or by placing a selected color text onto the image. I haven't tried using any other method.
I've tried deleting and reinstalling Gimp and I'm on Win XP PRO SP3.
View 14 Replies
View Related
Dec 5, 2012
My color settings are synchronized across all CS applications. I'm trying to see document both as a soft proof and not. Neither mode improves the color differences I'm seeing on screen. Photoshop displays color TOTALLY differently from all other CS applications: Bridge, InDesign, Illustrator & Acrobat.
In the image below, Indesign is on the left. Photoshop is on the right. Image appears in Bridge, Acrobat and Illustrator just like InDesign.
View 3 Replies
View Related
Apr 12, 2013
whats shortcut key for color match tool?
View 6 Replies
View Related
Sep 30, 2012
I used a web hex code to match up a color in a logo. (8700ff). However, now that i am in the process of designing its seems that my PS hex values are not the same as web hex values. Is there a setting that i need to get into to make these match?
Look at the words '' SILVER & HD CAMERAS '' as compared to the words '' The Buffalo Nickle ''. These both are set at a hex value of 8700ff. The color of "HD CAMERA" is correctly matching the site logo which was made in PS cs5. But the sites interpretation of that same Hex value is different.
View 10 Replies
View Related
May 12, 2009
I am pasting a layer to an image and If I want the brightness and color of the layer to match with the brightness and color of the target image, then what is the best and quickest way to do so?
View 2 Replies
View Related
Nov 6, 2007
I am trying to match the color.
The original is the manufacturer's, #1.
Shot at 2007-11-06
My photo is the yellowish, this is my original photographed image, #2.
Shot at 2007-11-06
The third is my closest attempt to color correct: (Color Balance: Midtones- Red +10, Green +40, Blue +72, Shadows- Cyan -5, Green +8, Blue +13, Highlights- Cyan -4, Green +5, Blue +12), #3.
View 5 Replies
View Related
Feb 26, 2012
Wondering if there is a plugin that will match a color that is in picture. For example if I was trying to touch up a part of the sky it would pick out the blue I needed.
View 1 Replies
View Related
Mar 9, 2012
Editing a video in LR4 you can capture a frame, adjust the color, and save a preset to apply to other videos. BUT the frame capture is a jpg so you can't specify a color temperature; you hve to use the slider(s) and cross your fingers. I have two consecutive videos, one shot with AWB and the other set to Shade. I need to adjust the AWB shot (very cool) to match the Shade shot (very warm). There are so many sliders, I can't even get close to matching them.
View 1 Replies
View Related
Aug 9, 2011
However, I am not quite satisfied: whatever I try, the background never seem to match with the characters (I know most of you will find it awful, but my goal is to get it to be somewhat plausible, now it seems just too fake).
View 2 Replies
View Related
Jun 23, 2012
I have to deal with multiple layer documents for producing underwater mosaics. Very often, the images vary in colors a bit. For large mosaics, I run the images thru a batch job before I use them. For smaller mosaics (e.g. just 10 to 20 images), this is a bit of overkill, in case I have to tweak just 5 or 10 or so.
In this case, I prefer picking one of the 20 layers as my "reference" and manually match the colors of those layers, that need the match, one by one.
My question now: Is there a way, that I could select, lets say 10 layers that need the match and apply the Match Color to all of them in one go?
View 3 Replies
View Related
May 27, 2013
I am a mixed media artist/art teacher and I pay a local printer to adjust the colors of my work via Photoshop so that the final print matches the colors in my original artwork. I would like to learn to do this myself, but I have no clue which product I need to purchase or how to get started.
View 1 Replies
View Related
Nov 16, 2008
I made a simple panel in photoshop and used the #number for the color selected to fill one side of the panel in my CSS code. When the page is rendered there's a very slight difference between the panel and the background which I expect to be exactly the same.
View 10 Replies
View Related
