Illustrator :: Spot Color Swatches In AICS6 And AICC Do Not Match Color In Design
Feb 24, 2014
Some of the lighter, saturated colors in the PANTONE+ swatches library appear to be a different color in the swatch list than they are when applied to a design. see below for screen shots.
i can duplicate this situation on calibrated NEC MultiSync monitors and uncalibrated laptops. We are running on Mac OS X.8x and above.
Designers are complaining about not being able to pick a color from the Swatch Library in AICS6 or AICC. InDesignCC does not seem to have the same issue.
View 1 Replies
ADVERTISEMENT
Nov 24, 2013
I need to change the default text color to a pantone spot color.
View 5 Replies
View Related
Jul 19, 2012
I can only load some of the swatches for the color books into the swatches pallet. Most importantly I cannot load the pantone swatches. I just get a blank pallet.
View 17 Replies
View Related
May 4, 2013
I don't have any color swatches on my Ai6 in painting or for gradents. On my Ai CS4 it came with lots of color swatches.
View 1 Replies
View Related
Aug 10, 2013
How do I add a "Gradient Sliders'" Colour to the Swatches?
I've tried dragging everytihng I can, with no luck.
How do I then take swatches from Illustrator and open them in Indesign?
If you think of the Gradient Sliders as end points,
And why does Illustrator's "help" file refer to them as "stops" but they're called sliders inside the app?
View 9 Replies
View Related
Aug 13, 2012
We have CS5 and how can we create 6color CMYKOV swatches in Illustrator?
View 2 Replies
View Related
Dec 2, 2011
I have a MAC and use CS4.Sometimes when I use illustrator my color swatches are there and easy to access, change colors or values.Other times I have no color swatches in my color window, and no slider bars in the color slider window (No values can be adjusted/ no bars to adjust)
Only if I use the drop bar on the color box(top right) and change to CYMK or RGB, can I change the color.
View 8 Replies
View Related
Jul 14, 2013
how do I access ase color swatches saved in photoshop for exchange into illustrator cs6
View 2 Replies
View Related
Aug 28, 2012
I have CS5. The bugs and broken features in AICS6, make it unusable in my workflow.
I am specifically concerned about the inability to drag global color swatches from the color panel to Gradient stops in the Gradient Panel. I use this method to update a gradient color because I find it MUCH faster than option-dragging to duplicate a stop color, then deleting the unused stop. Since I do this constantly, I find using CS6 very tedious.
View 4 Replies
View Related
Oct 8, 2013
I am taking pictures of art and would like to correct the photos so that the colors are accurate. Need to use some kind of color swatch in each picture? I would like to include the color swatch strip in the edge of each picture so that I can correct the colors more easily and then crop the color swatch out. What kind of colors do I need in the color swatch? Also, would it be useful to have black/white/50% grey in the strip to work with leveling? I am going to correct the leveling and try to remove the color cast.
I also have to photograph things which are very shiny (e.g. coated in shellac). How to use an external flash to minimize flash glare?
View 4 Replies
View Related
Oct 15, 2012
Is it possible to find out how bright is an color? I need to find the darkest color in document's swatches. My solution would be to convert (script internally, without actually making any changes in document) swatches to grayscale, compare them and pick the darkest. But how to convert swatch defined in undefined mode (they might be in lab or cmyk) to grayscale?
I found in 'js scriping reference' a method "convertSampleColor", but I have no idea how to use it. Any examples?
View 2 Replies
View Related
Sep 12, 2013
I'm making a simple template to laser cut. The laser cutter acts as a printer and you choose the power, speed, etc. for each color that is in the document. I only want to cut, so I only have RGB red lines at 0.001 pt thickness. Or at least that was the plan. One of the shapes in my template has come out a different red (the swatches were CMYK despite the document colour mode being RGB). I would now like to select all the paths in the document and make them all RGB red. However, when I open the color panel from the dock the sliders are CMYK, again this is despite the document color mode being RGB:
How do I change all the paths to be RGB red?How do I stop Illustrator offering me CMYK options and swatches and offering RGB instead?
View 11 Replies
View Related
May 18, 2012
Is there a location to download the latest Pantone color swatches? We are currently running Illy CS 5.0.
View 2 Replies
View Related
Mar 17, 2013
The color swatches in toolbar for fill and stroke are not functioning as they should. When I select an object on the artboard, the swatches display fine in the toolbar for what they should be. However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be.
I am using 16.2.1 (cloud) for Mac OS 10.8.2
I've submitted a bug report.
Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting. I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.
View 2 Replies
View Related
Nov 7, 2013
I created an ad using one PMS color after orginially being told that it was a "Thanksgiving 4 column x 4.5” spot color ad”. I received the following message from the newspaper printer today:
"Please relay to your corporate art department that the newspaper does not print in PMS/Pantone colors, except on a full color page, which requires an additional color charge. For spot color, we print in primary colors such as red or green, or in cyan or magenta alone.
As I understood it, spot color meant pantone, and CMYK was process. Am I wrong here or are the printers using the term "spot color" incorrectly?
View 2 Replies
View Related
Sep 10, 2013
How do I create a PDF that only incluse my PMS spot colors and process black?
View 2 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Jun 17, 2013
Is there a way to change the color of the Vignette to match the page background color. It appears to that only Black is available at this time.
Is there a transparent vignette available anywhere .
View 1 Replies
View Related
Dec 23, 2011
We print out spot color seps every day using CorelDraw X4. After we print out the plates, I have to cut down the vellum that we print on so that we do not have a bunch of extra blank vellum on the sheet.
We make use of the info that is printed on the lower left of every page where it states something like the following:
S:DirectoryWhereTheArtworkisLocatedfilename.cdr
Wednesday, December 23, 2011 8:00 AM
Plate: 1 of 3
After I cut down the sheet, I then have to hand write the name of the spot color onto the sheet of vellum in marker.
Is there any way at all, to make it so that CorelDraw would actually add the name of the spot color that is printed on each page to the information that is already being printed to the lower left? Ideally, it could be placed in the same area where it's already printing the plate information on the last line.
Could it read:
Plate: 1 of 3 Color: Pantone 375
View 6 Replies
View Related
Aug 21, 2013
I create a logo in Illustrator. It is 2 colors, black and pantone 287. The gradient is only with the blue color. I save the file as a EPS. I place the EPS into another program, and generate a new EPS file with all the elements and type combined. My printer requires that all the fonts be converted to outline so I open the EPS again in Illustrator. The logo with the gradients has been converted to CMYK and the gradients now appear in the LINKS panel but they are not editable.
Why is this happening? How can I preserve the EPS so that I don't have to manually replace the converted gradient logo EVERY time I have to make a new EPS file?
View 1 Replies
View Related
Jul 4, 2012
I have a number of art items on a document, some of them are filled with spot colors and some of them are with process color.Is there any api or method by which I can find out which color type(spot or process) is applied to the selected art item?
View 4 Replies
View Related
Feb 11, 2012
I have something like 1,850 photos, taken in RAW and later converted to DNG, to create a stop motion. All the photos were taken with the same camera (Canon 5D Mk II) and most of them with a 24-70L. All were taken in the same lighting conditions (in an interior, with the house lighting from flourescent lights) and the same day, in a period of maybe 2 or 3 hours. Each "take" was with the exact same camera and exposure parameters.
When processing the photos in Lightroom (using the LR4 beta) I can see some minor but very noticeable differences between color an exposure in the photos of the same "take". The exposure can be more or less automatically corrected by the Matching total exposures (although I think this doesn't work when the exposures are really similar, but there are some subtle differences like in this case, say, something along ~1/5 stop or so), but I haven't found how to try to match the white balance. All of the photos have already been set to a specific WB (I took a ColorChecker Passport at the beginning of the session), but there are still some differences between some of the shots. Some of them look a tad more greener. I blame the flourescent bulbs, but I'm not sure of the real cause.
So, the question is: is there a way to match the color balance of a series of photos to a target one? I really don't want to go photo by photo setting the white balance manually. Is there a tool like the Match total exposures, but for color balance? I have already tried with the automatic white balance, but the problem is that the decided WB for the photos is not the one I need, and I need to have the same WB for all the session, and this could change from different takes. The difference between shots is usually around 4 or 5 "points" in the Tint scale, some are with Tint +11, some with +15.
Or any other tool that could process this after? At the end I'll use JPGs to create the stop motion, so if there is a tool that could process the exported jpgs it could work too.
View 2 Replies
View Related
May 27, 2011
So Ive learned how to turn a color photo to B&W with spot color ...how to turn a color photo sepia, but also spot color. I have a wedding photos that I think would be a fun shot to play mixing those colors together . I have searched for the info earlier today and wasnt successful .
View 8 Replies
View Related
May 29, 2012
How can I make my spot color definitions choice persistent? I read a kb item that said how to swap out the new Pantone Plus color books for the old ones, to maintain color parity with older versions. One of the steps has me going to "Spot colors" on the swatches pallette and selecting "Use CMYK Values..." instead of "Use LAB Values...". I don't want to have to do this with every file. Is there a way to make this choice persistent?
View 4 Replies
View Related
Sep 28, 2009
I have 5 spot color ( Pantone) and CMYK color at my design. How can i export this 9 color ( seperate and with Pantone) to photoshop cs4? I want see 5 pantone color and cmyk at photoshop channel list!
View 4 Replies
View Related
Oct 22, 2013
In illustrator, how do you change a photoshop spot color channel that has been imported into illustrator. Ever since Illustrator CS2 you could import a psd into Illustrator and you could ungroup the channels and change the colors. How do you do that in CS3-6? I have been trying to figure this out for years. My old computer with Illustrator 10 is about to die and so will my ability to do what I descried above.
View 1 Replies
View Related
Jul 4, 2012
I have a number of art items on a document, some of them are filled with spot colors and some of them are with process color.Is there any method by which I can find out which color type(spot or process) is applied to the selected art item?
View 4 Replies
View Related
Oct 10, 2013
I am trying to grab specific spot colors and move them to separate layers for our cutting software. In this case I am trying to grab "perimeter cut" and move it to a layer called "tc 1" I get the following error when I try to run the script.
#target Illustrator
var idoc = app.activeDocument;
var ipath = idoc.pathItems;
if (ipath.typename == "SpotColor") {
if (ipath.spot.name == "perimeter cut") {
ipath.move(tc 1, ElementPlacement.PLACEATBEGINNING).
}
}
View 5 Replies
View Related
Sep 17, 2013
I'm having an issue where I can't convert spot colors to CMYK in the swatches panel. Currently to fix I have to copy elements using the spot colors in to a new blank document, then convert them, then paste back into the original document.
Also if I try to delete the spot color, it doesn't fully delete the swatch.
I'm using Illustrator CC 17.0.0
I've attached a video [URL] ......
View 3 Replies
View Related
Jul 17, 2012
color value of spot colors cannot be adjusted via javascript?
View 5 Replies
View Related
Mar 23, 2012
I've been looking around for a script that will take the used spot colors in a document and place them in a predetermined spot. I've came across several posts about this, such as the COLOR CHIPPER although I think it's focus was on swatches. What is confusing is the part of making New CMYKColor or RGB or if I even need to do that. I've looked at other posts and the Adobe docs, but none seem to work. Adding the text isn't difficult, it's getting these spot colors to reflect what's in the document that is. From what I'm seeing now:
I may have to use some other type of script such as Applescript to get rid of unused swatches first throught the actions panel, but I'm not sure.I could possibly use the getByName method to call out the specific rectangle and the and relative callout with the appropriate color instead of having to position everytime.
View 9 Replies
View Related
