AutoCAD Civil 3D :: Imported Google Earth Image Size Not Match With Imported Surface

Mar 7, 2013

Previously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?

View 3 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Import Google Earth Image And Surface?

Nov 13, 2010

I am trying to import a surface and Image from Google Earth.  Basically my steps are as follows:

start GE and C3D find area that I need on GE and zoom in under C3D, insert GE Image and Surface (then it goes straight into select point, and rotation)

Like most discussions i've read.., the import slows down at 49%, and then it chugs for hours if I let it. So i have to cut the cord and re-start both programs.

I saw in a discussion that there are settings that we can change the rows and columns to something like 70x70.

however.... I cannot find where to update this.  I typed importgesurface, and clicked on the ribbon as well..., then tried to right click, but it does not take me to the settings. I also figured that I might have to run C3d as admin, but no luck either.

find these settings so I can change them to import a surface and image that is about 15acres?

Running:
Sony Vaio
intel core i7
8GB Ram
64bit Windows 7 Pro

View 5 Replies View Related

AutoCAD Civil 3D :: Import Google Earth Image And Surface?

Feb 4, 2013

I have no problem bringing my google earth image and surface into autocad civil 3d 2011...but when I do bring it in the elevations are not correct...I'm bringing in a google image that have an island over water.... the units are wrong even though i changes to units in autocad...what do I have to do in order for google earth to import the correct elevation into autocad civil 3d 2011 ?

View 5 Replies View Related

AutoCAD Civil 3D :: Cut / Fill Quantities From Google Earth Surface

Jan 14, 2013

I am using Civil 3D 2011 for my job. I am trying to put together preliminary estimates and need earthwork qunatities. I have no issue importing a google earth surface. I import the surface and create a boundary. How do I calculate cut/fill quantities? I tried creating a finished ground surface then making a tin volume surface to compare the two. However, I do not know how to create a fnished ground surface. I have also tried grading in civil 3d. Cannot get anyting to work.

View 4 Replies View Related

AutoCAD Civil 3D :: Cad To Earth - Google Image Resolution

Sep 21, 2012

The AUGI Magazine (Page43) this month has information on a free download called CAD to Earth. Available Jan1, 2013. Is this the resolution to future downloading and using Google Images in our drawings?

View 6 Replies View Related

AutoCAD Civil 3D :: Importing Google Earth Image Into 2013?

Apr 6, 2012

Does you can still import a google earth image into civil 3d 2013 and if so what are the steps to do so.

View 5 Replies View Related

AutoCAD Civil 3D :: Import Google Earth Image In 2013?

Jan 11, 2013

How can i import Google earth to the original coordinate system in 2013 autocad civil 3d?

In autocad civil 3d 2012 i imported google earth image and the program asked me about (use coordinate system for image location)

but how can i get it in 2013

View 6 Replies View Related

Illustrator :: CMYK Values Of Imported Image Don't Match?

Mar 24, 2013

I made a simple poster using photoshop to make the background and illustrator to make the fonts and some other stuff. In CMYK my black is just 100% K ( in photoshop)
 
 When placing image in illustrator the 100% K (black) changes to different black with C M Y added. But then when I save it as PDF the preview shows black as a bit grey (which is something normal- in print it will be just black). So my question is .. should I change enything just to be able to see a 100% K in illustrator in order to match CMYK values of Photoshop? Or should I leave it this way? I guess if I am getting a "grey" in PDF preview is something good isn'it? because in photoshop when I set to 100%K in my screeen it looks like grey and not total black.

View 21 Replies View Related

AutoCAD Civil 3D :: Edit Surface Imported From LandXML?

Sep 19, 2012

Is it possible to edit a surface imported from LandXML with additional survey information (points and figures)?  I would assume the tin could be edited and the new data included in the surface.

C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM

View 1 Replies View Related

AutoCAD Civil 3D :: Export To Google Earth

May 9, 2012

Months back I did this project with multiple surfaces and exported them to Google Earth with no problem. Today, I'm trying to update a surface with some changes. After the changes, I tried to re-export it to Google Earth, but for some reason it's coming in really small. I have my units and zones set to what they have always been.The surface is highlighted in yellow, but it should take up roughly the size of the red circle.

View 3 Replies View Related

AutoCAD Civil 3D :: Google Earth Importing

Feb 16, 2010

I ran into a problem after just installing Civil 3D 2010 when I tried to import an image and elevation data from google earth. The message box says the following:

The Feature you are trying to use is on a network resource that is unavailable.Click OK to try again, or enter an alternate path to a folder containing the installation package 'Google Earth.msi' in the box below.

View 5 Replies View Related

AutoCAD 2013 :: Importing Google Earth Image?

Aug 9, 2012

I just installed 2013 on my pc yesterday.  The first task I was given was to import a Google Earth image into AutoCAD to try to get some dimensions on a house for an exhibit.  I open Google Earth and set my location to import, then I go to the Render tab, select Set Location, I click Import the current location from Google Earth, click Continue, then i get an error message saying Class not registered.

View 2 Replies View Related

AutoCad :: Put Profile Image Generated From Google Earth?

Feb 19, 2012

Lets say I wanted to put a profile image generated from google earth (a Jpg or Bmp ) on a layer in a side view of autocad for reference, How would I insert it. I have done that with 2008 but can't do it in 2012.The image from google earth has dimensions on it so it would be easy to scale properly to my drawing. So I would like to be able to put it on my dwg. I don't know what (tags means on this page. Also I have saved the image on my computer and I have tried to show it on this post but don't know how. The image is a jpg The format of this posting is asking for a url. as you will see I tried to put C:usersonkelbobdesktopprofile.jpg below but it didn't work.

View 1 Replies View Related

AutoCad :: Copy And Paste Image From Google Earth

Aug 27, 2013

For our field layouts we simply copy and paste image from google earth then scale them (using CTRL + C and CTRL + V).For some reason now, my image that was already pasted into a drawing now only shows the border of the image, not the image itself. Same story with any new images I try to paste in. How to fix this back so I can view my images?

View 6 Replies View Related

AutoCAD Civil 3D :: Google Earth Map Insert Is Flipped

Mar 14, 2012

The Google earth map image I insert into my drawing is flipped (north to south) when view in isometric. The surface I download at the same time is OK. I do modify the original surface by pasting another surface into it.

View 9 Replies View Related

AutoCAD Civil 3D :: Google Earth Units - Elevations Are Different

Jan 22, 2013

My drawing is set to state plane  and feet. when I import GE the elevations are different that those reported on the GE screen. For example at a given location GE reports 538 but the c3d surface  report 164 a factor of 3.28. sounds like a meter thing going on. is this normal?

64 Bit Win7 OS

View 8 Replies View Related

AutoCAD Civil 3D :: Google Earth Elevation Different In GE And Import

Mar 19, 2012

Is ther a setting I am missing? In GE the ground elevation is reported as 45, but on import (drawing set to state plane) the elevation is 15?

HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram

Note: Its all Resistentialism, so keep calm and carry on

64 Bit Win7 OS

View 9 Replies View Related

AutoCAD Civil 3D :: Profile View Of Alignment In Civil D & Google Earth Varies

Dec 25, 2012

I imported Google earth surface (at eye alt 600m) to civil 3d 2012 and created an alignment of length 181m.

When I exported same alignment to Google earth , it showed the length as 190m ( the difference increases with increase in length of alignment) And also the profile view of the alignment in the Civil D & Google earth varies.

View 4 Replies View Related

AutoCAD 2010 :: Convert Google Earth Into Dynamic Image?

Sep 10, 2013

I want to take a google or bing map along with its different zoom levels and convert it into an autoCAD image.

Is this possible without using 3rd party software?

The end goal is to essentially have a replica of google-maps in terms of zooming and detail, + the ability for me to add links to the map which take me to different pages/areas of the map.

The best I have been able to come up wtih so far is taking screen captures at various zoom levels and attempting to vectorize the images OR taking screen caps at different zooms and spanning between different zooms via page switching creating the illusion of zooming, both of which are adequate as far as functionality is concerned, but I want things the design to be a little more robust if possible.

View 5 Replies View Related

AutoCAD 2013 :: Overlay With Google Earth Or Google Map

May 8, 2012

I am using Autocad LT 2013.  I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field. 

In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION'  and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).

Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).

When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:

I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right.  Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.

Any way to have the ability to draw subdivision lines on satellite imagery.  Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.

View 5 Replies View Related

AutoCAD Civil 3D :: Public Conceptual Design To Google Earth

Feb 15, 2013

I wanted to public this design to Google Earth, but some how the model is flat wiith existing ground. I did choose "Drape entities on ground" and also tried "elevation relative to ground" it is sitll a flat model.

View 1 Replies View Related

AutoCAD Civil 3D :: Google Earth - No Such Interface Supported Message

Jun 19, 2013

Google earth image import has always worked well for us in 2010 but since updating to 2012 we have not been able to import a google image.  We get the following error message

Error Message:  No such interface supported

Error Number:  0x80004002

Description:

Source:

Input GUID:  {11957e8f-b520-4681-8113-024ec7f8d84c}

Error GUID:  {0000000-0000-0000-0000-000000000000}

I've tried uninstalling and reinstalling Google Earth to no prevail. 

View 7 Replies View Related

AutoCAD Civil 3D :: Google Earth Utilities With R2013 Products?

Apr 5, 2012

Now that details of the R2013 version of AutoCAD Civil 3D are public, I wanted to update you on the status of Google Earth import and export workflows. The following statement summarizes where we are:

Due to limitations on the use of the Google Earth API, AutoCAD® Civil 3D® 2013 does not include API access to allow customers to import Google Earth imagery and/or surfaces directly into Civil 3D. We are aware of the importance of including preliminary surface and aerial imagery in your design workflows and are actively looking for an alternative.  However, we cannot share any specific information about potential future product enhancements. When appropriate, we will communicate technology plans via various channels including Autodesk Labs, Facebook, Blogs and the Civil 3D Discussion Group.

As noted above, we'll update you as soon as we can share information on technology plans that target the workflow of incorporating readily available image and surface information into your design workflows. 

View 9 Replies View Related

AutoCAD Civil 3D :: Export Alignment Created In 2013 To Google Earth?

Aug 5, 2013

how to import my alignment to google earth so that i can visualize how my alignment goes

as there is no link between google earth and civil 3d 2013

View 9 Replies View Related

AutoCad :: Overlay With Google Earth Or Google Map?

May 8, 2012

I am using Autocad LT 2013. I wish to use Autocad to draw subdivision lines and need to overlay satellite imagery (Google Earth or Google Maps) in tandem with Garmin GPS waypoints taken in the field.

In the 'type a command' ribbon, when I type in 'GEOGRAPHICLOCATION' and select 'Import the current location from Google Earth' (opens Google Earth, where you can retrieve a location to import).

Then a window appears which says 'Navigate to the location in Google Earth that you want to import before continuing (for best results, configure the view in Google Earth to look directly over the location that you want to import).

When I select 'continue' the command ribbon asks that I, 'select a point for the location <0, 0, 0>:

I have looked at the co-ordinates on google earth and attempted to enter but it does not feel right. Then says 'specify the north direction or (angle):s, then 'Point or option keyword required'.

way to have the ability to draw subdivision lines on satellite imagery. Garmin's Basecamp will allow drawing on top of google earth but I do not want tracks, I will only use the waypoints made by the gps device, but I need to draw measured lines that reflect the co-ordinates of the location.

View 1 Replies View Related

AutoCAD LT :: Imported Custom Settings - Icons Don't Match Commands

Jan 16, 2013

I built a new computer, Windows 8, 64 bit.

Installed Acad LT 2011 64 bit.

Did an export of custom settings from a Windows 7 64 bit LT 2011 installation, imported those to the new Windows 8 LT 2011 installation. This was done using the Start>Programs menu. (I ditched the "Metro" stuff.)

The setup looks mostly the same, but when I go to use it, the icons don't match the commands. I have toolbars down the left and right sides with many icons. The icon for Hatch runs the Polygon command. The Move icon runs the Offset command. Lots of them are screwed up.

The ribbon commands along the top seem to be OK.

View 2 Replies View Related

AutoCAD Civil 3D :: Coordinate Conversions (UTM To WGS84) For Imported TIFF Image

Jun 13, 2013

I have a utm .tif and .tfw files which I need to convert into a wgs84 ascii file (csv ideally) with the full list of x,y and z values.  The UTM needs to become geocodes and it needs to be in ascii. I am using Civil 3D 2012.

View 9 Replies View Related

AutoCAD Inventor :: Move And Rotate Origin Of Imported Step File To Match Parent

Mar 8, 2013

URL...how to move the origin of a part when you want a common origin for everything. in iv2012 you also get angles about axis, in greyed out boxes. 

In a test assembly I can get the offsetting to work, but not the rotations. The part I want to edit origin of is rotated in all three axis.

View 4 Replies View Related

Xara :: Edit Imported Graphics Match Color?

Jan 10, 2012

I am placing my customer's logo by importing their graphic file (they gave me jpeg, tiff, eps, bmp). I find the background color does not match and need to know how to change it.

View 9 Replies View Related

Revit :: How To Literally Rotate Entire Building To Align Google Earth Image

Mar 19, 2012

I have modeled a building that's a typical shoe box (rectangular shape building).

When I searched the address in Google earth, the true north of the site is not perpendicular to the building: it's angled.

When I chose "Acquire from Google earth" at the Site level, it gave me exactly what I saw in Google earth.

My question is:

I have finished the model of the building in Revit which doesn't align with what I acquired from Google earth.  How do you align the model to the Google earth image?  Do you have to literally rotate the entire building to align the Google earth image?  

Also is there a difference between Google earth and Google earth pro for this task?

View 1 Replies View Related

Revit :: Delete Imported DWG Category From Imported Objects

Nov 3, 2011

I have a dwg that someone imported and I cannot find where this object is. I have tried searching the database with DBLink, Ideate BIMLink and I have gone into every view to no avail. I also used the reviTTools add-in which says there are no drawings in the file. Am I dealing with a corrupted file? I am super OCD and this is in our Template which makes it an even bigger problem.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved