AutoCAD Inventor :: Red Up Arrow In Model Browser
Aug 23, 2012What does the red up arrow next to extrussion features indicate?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Drawing Browser Doesn't Match Model Browser
Oct 29, 2012I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedAutoCAD Inventor :: How To Enable Model Browser
Jul 26, 2013How to enable model browser in Autocad Inventor Professional 2014 Student version ?
View 2 Replies View RelatedAutoCAD Inventor :: Model Tree Browser Freezing?
Dec 5, 2013The model tree browser is freezing multiple times per day. Even if I close the browser and re-enable it in the View>User Interface menu, it is still frozen. It wont unfreeze until I close Inventor completely and re-open it.
Dell M6700
Win 7 Pro 64Bit
i7 3720QM 2.6GHz
16 GB RAM
Nvidia Quadro K3000M
AutoCAD Inventor :: How To Make Part Selected In Model Browser
Jan 25, 2013I'm using VB 2010 express. My code is getting selected part and changing some "Design Tracking Properties" of it. But when I change the properties focus goes from the selected part/sub?... How can I make part selected again? How can I make it focused.I need like below like
invDocument.SetFocus or invDocuments.MakeItSelected like...
Dim asmDoc As AssemblyDocument
asmDoc = inv_App.ActiveDocument
'********
Dim invDocument As Document = Nothing
Dim compOcc As ComponentOccurrence = Nothing
[code]...
AutoCAD Inventor :: Not Load The FILE STATUS Box Under The Model Tab In The Browser
Jan 9, 2012we've loaded Inventor 2012 on an new PC and it did not load the "FILE STATUS" box under the Model Tab in the Browser - I know there is a way to "turn" it on but have lost those instructions.
View 4 Replies View RelatedAutoCAD Inventor :: Reset Sketch And Extrusion Numbers In Browser Tree Along With Model Parameters
Jun 11, 2013I want to reset the number for the sketches, extrusions, etc. in the browser tree of my template file to start with 01 instead of sketch48 and extrusion69.
I also want to reset the model parameters to start with d0 instead of d485.
The attached image show an example of a simple cylinder that I created from my .ipt template file.
AutoCAD Inventor :: Browser Shows Everything But No Model Shows Up On Workspace Screen
Jul 20, 2012It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
AutoCAD Inventor :: Cannot Add Browser Node To Empty Browser Folder
Apr 8, 2013I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
AutoCAD Inventor :: Force To Use Browser Of Choice Or Default Browser?
Nov 7, 2011When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
AutoCad :: Arrow Head Is Filled In Block Editor But Not Filled In Drawing (model Space)?
Jan 16, 2012I have this north arrow that is not working in a clients drawing. Look at this drawing with the block in it and determine why the arrow head is filled in the block editor but not filled in the drawing (model space)???
View 3 Replies View RelatedAutoCAD 2013 :: Why Doesn't Arrow Leader Disappear When Flip Arrow Direction To Inside
Dec 11, 2012why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
AutoCAD Inventor :: Convert Surface Model Pump To Solid Model?
Oct 4, 2011Am trying to convert this pump into solid ?
View 6 Replies View RelatedAutoCAD Inventor :: Convert Surface Model Into Solid Model?
Jan 15, 2013My problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
AutoCAD Inventor :: DXF Model - File In IPT Format As 3D Model?
Apr 12, 2012I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View RelatedAutoCAD Inventor :: Insert Arrow Into Drawing?
Jan 28, 2013I want to insert arrows into an idw. I usually use 'Leader Text' then leave the text blank.
The only problem with this method is it leaves a small horizontal or vertical line at the 'text' end of the arrow. Is there a way to get rid of this or is there an alternative way of inserting an arrow?
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
AutoCAD Inventor :: Balloon Arrow Turns Into A Dot?
Feb 27, 2012When im replacing the balloon arrow it turns into a black dot. Pretty annoying to change all the dots to arrow everytime.
View 4 Replies View RelatedAutoCAD Inventor :: Dimension A Point Using Arrow (x / Y)
Apr 10, 2013This is not exactly a CAD issue but I use Inventor at times to create illustrations for math stuff. Is there a way to place a dimension like an arrow with x and y as text.
ASCCi art of what I want:
<---(1.2, 3.4)
Inventor Professional 2012 SP1 (25 seats with subscription)
Windows 7 64 bit
Lenovo D20, 12 GB RAM, Intel Xeon X5687 3.6 GHz, SSD
Quadro 4000, driver 8.17.12.9573, dual monitors
SpacePilot, driver version 6.15.3 Firmware 3.12
AutoCAD Inventor :: View Arrow Instead Of Section Lines
May 30, 2012 inventor 2012. for instance for a aux. view if it is not in-line with the parent view it puts a section line. is there a way to have a single view arrow?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
AutoCAD Inventor :: Panning With Keyboard Arrow Keys?
Jun 13, 2006I have just noticed that while in Isometric view I can Pan an item in the window by pressing the arrow keys on a keyboard. One thing however is that to pan to the right side of the screen I have to press left arrow key. It is sort of pressing the "wrong" key to get the model slide to the "right" direction.
View 6 Replies View RelatedAutoCAD Inventor :: Create Custom Arrow Heads
Dec 21, 2008Is it possible to create your own custom arrow head for use with leaders, balloons, dims etc?
View 3 Replies View RelatedAutoCAD Inventor :: Browser Name Not Changing?
May 29, 2013When you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
View 4 Replies View RelatedAutoCAD Inventor :: 3D Sketch In Browser Bar
Nov 1, 2013I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies View RelatedAutoCAD Inventor :: BC Symbol In Browser?
Nov 15, 2012I have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: No Breaking Mode In Hole Note For Arrow?
Jun 6, 2012I am using 2011 version of inventor.
In drafting while creating note of hole there is no breaking point for arrow there is only straight arrow line( pls find attached file of DIM 01). I am not getting any setting for the same.
I want notation having breaking point. ( Ref attachment Dim -2)
AutoCAD Inventor :: Arrow Side Position In Drawing Templates
Nov 1, 2012I want to change the Arrow Side Position for Weld Symbols from Top to Bottom for all future drawings. I have opened the Drawing Template (Standard.idw) and opened the Styles Editor and switched the Arrow Side Position and saved the template. Then I have tested. In the template it works good, but when I open a new drawing (based on the template) the arrow side position didn't change.
View 4 Replies View RelatedAutoCAD Inventor :: Asterisk In Browser After File Name?
Oct 20, 2011Why sometimes we have an asterisk (a star) after the file name in the browser (in "Vault mode")? see attachment
View 1 Replies View RelatedAutoCAD Inventor :: Object Browser Disappeared
Jun 14, 2013I just popped off to a meeting, and when i returned the Object Browser has disappeared from my screen and i can't get it back. Where it might have gone or how i can get it back.
View 9 Replies View RelatedAutoCAD Inventor :: Rename A Browser Node
May 2, 2013I am attempting to rename a browser node. Here is the code I'm using and I'm getting a "Property 'Label' is 'ReadOnly'" error. In the API I found a note about using SetLabel() but that seems to only have ones for ClientMade browser nodes.
oSubAssyNode.BrowserNodeDefinition.Label = "XXX"
AutoCAD Inventor :: Grouping Features In Browser Bar?
Jan 27, 2010Inventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.
View 9 Replies View RelatedAutoCAD Inventor :: Suppress Browser Folder?
Oct 8, 2012I am trying to suppress browser folders per the API with no luck is this even possible. I would also like to control its BOM Structure.
View 1 Replies View Related