The model tree browser is freezing multiple times per day. Even if I close the browser and re-enable it in the View>User Interface menu, it is still frozen. It wont unfreeze until I close Inventor completely and re-open it.
Dell M6700
Win 7 Pro 64Bit
i7 3720QM 2.6GHz
16 GB RAM
Nvidia Quadro K3000M
I want to reset the number for the sketches, extrusions, etc. in the browser tree of my template file to start with 01 instead of sketch48 and extrusion69.
I also want to reset the model parameters to start with d0 instead of d485.
The attached image show an example of a simple cylinder that I created from my .ipt template file.
When I try to replace a component in Inventor 2014. It replaces it but does not update the tree in the browser. I have to manually delete the part and place a new one in.
View 9 Replies View RelatedI am migrating into Inventor from Solid Works, which had a keyboard short cut for collapsing the parts tree in the browser. Is there a similar command for IV?
View 9 Replies View RelatedI opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedIn Inventor Drawing Mode how to select the models in Browser tree using VBA, I think using selectset is not possible in my knowledge. Is there any other way to execute the selection .
View 1 Replies View RelatedI am looking to apply a set part number iproperty to the first, then second, then third components in the assembly browser tree in my iLogic rule, regardless of their current part number. (I need to select them by their position in the browser tree as their part number will vary). How do I do this?
View 1 Replies View RelatedUsing Inventor 10, I have replaced several components of my assembly with new copies of the components to be modified into new parts. For some reason the model tree still shows the old part numbers, but editing the parts reveals that they are indeed the new parts. How to correct the part listing in the model tree?
View 9 Replies View Relatedwhat the little symbol that looks like the recycle symbol is in the model tree is? I have several parts in this assembly and many of them seem to have this symbol that says adaptive next to them and I can't find and rhyme or reason to it. I am attaching a screen shot of it. I use Inventor 2012.
View 1 Replies View RelatedIs there a filter ability for the model tree? What I need is I have a part that is buried within a sub assembly that I cannot find. I know the name, but what I am looking for is a tools that allows me to type in it's name and it show me in the tree where it is associated.
View 9 Replies View Relatedfailure to refresh Model Tree after switching configurations - app restart required
We have a user who is getting this message several times per day and must restart his PC. He is the only user of the Inventor Vault product using 2013. We have redone his laptop and and given him a clean laptop with a fresh install of AutoCAD.
I've got a user who is seeing this lock symbol on some Content Center parts in his model tree. I've never seen it before and what is causing it. This results in a lot of errors when he tries to check in any files where this shows up. I can open the same assembly on my machine and the lock does not show up, and I can check the files in with no trouble.
View 1 Replies View Relatedi wanna use a existent project to make a new one, i copy all the files that I need to a new project, then I use Design Assistant to rename all files, everything works fine this way. I just saw now a little 'problem' that doesn't bother me, but can be a problem to other ppl who open this project and see the difference.
When I rename the file name from Design Assistant (opening it from the top assembly), all the parts get its PART NUMBER updated and all the files are renamed too, but...when i open the assembly, in the Model tree, no parts have the name updated, all keeps the old name, but if i open the part from the model tree, i open the correct part already updated and renamed, so, its just the model tree displays name that are incorrect. Is that known ? Is there a solution ? Or am I doing something wrong to copy or rename files ?
I realized that is happens most when i rename files from a top assembly with subassemblies. Sometimes when i use just one assemblie with just parts inside it, everything goes normal.
I am trying to create a Treeview of Model tree which displays parts assembly...etc My code is working well and i am able to get the tree view, but the problem is how can i count the quantity of parts/assemblies and display as consolidated. For instance this below snapshot shows my treeview.
This above snapshot shows my output
Here besides all parts/assemblies i get Semi-Colons and Numbers rather than consolidated view For this part in fig
153049 QSL.1_8.8:1
153049 QSL.1_8.8:3
153049 QSL.1_8.8:3
153049 QSL.1_8.8
and Quantity as 3 separately.
What does the red up arrow next to extrussion features indicate?
View 2 Replies View RelatedHow to enable model browser in Autocad Inventor Professional 2014 Student version ?
View 2 Replies View RelatedI'm using VB 2010 express. My code is getting selected part and changing some "Design Tracking Properties" of it. But when I change the properties focus goes from the selected part/sub?... How can I make part selected again? How can I make it focused.I need like below like
invDocument.SetFocus or invDocuments.MakeItSelected like...
Dim asmDoc As AssemblyDocument
asmDoc = inv_App.ActiveDocument
'********
Dim invDocument As Document = Nothing
Dim compOcc As ComponentOccurrence = Nothing
[code]...
we've loaded Inventor 2012 on an new PC and it did not load the "FILE STATUS" box under the Model Tab in the Browser - I know there is a way to "turn" it on but have lost those instructions.
View 4 Replies View RelatedEver since I updated to Mavericks on my Mac, Premiere Pro keeps freezing on me when I try to view file in folders through the Media Browser. I'm sure it's a Mavericks issue, but I can't reinstall all of my apps, nor do I have the time. Apple doesn't seem to respond to my questions (they get lost in there 1 million questions a day) discussion page.
View 1 Replies View RelatedIt was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
I have a project with over 20 models that were all upgraded from Revit 2012 to Revit 2014. Once upgraded, I was able to reload all the Revit links and see these links in views, as I should. Later the same day, when opening a new local file, I am unable to open a view after loading a link without Revit freezing. Not crashing, but freezing... the application says "Not Responding", the memory allocation is unchanged in the Window's processes, and the journal file is no longer being written to. I thought maybe this is just taking a long time to process, but 1) it didn't take this long to open the view with the loaded link when it was first successful, and 2) I've left it for hours without change.
View 1 Replies View RelatedI have installed Autodesk in a new computer but for some reason when I access to the program, "History tree" is not showed by default.
I have tried a lot selecting options in "tools" and "preferences" but I can't locate where the option for displaying "history tree" is located.
I am trying to add a material with a specific density to the list of materials. After looking online it looks like I need to do that with the styles editor, but when I open the styles editor the only thing that I can work with is the lighting.
View 1 Replies View RelatedThis just happened to me this morning, I split a part into a multibody part and as soon as I did the split, the entire design tree got greyed out. It doesnt matter if I have only one body visible or both of them, the tree stays greyed out. I can still edit features but its annoying to not know what is on and whats off. I opened a new file mocked up a quick part with various features performed a split and same results.
Autodesk Inventor Professional 2013
I have an issue where a two positional representations are showing in the spreadsheet for editing, but not showing in the tree view.
I cannot delete a representation from the spreadsheet.
In assembly mode, when you right click on a part in the tree, you had ''open drawing'' as a choice. Now it's gone in IV 2013. how to add it ?
View 2 Replies View RelatedI have just upgraded to 2012 and I get a brief freeze when I enter a command such as line.
It only appears to happen when dynamic input is on or while I am in ortho mode. It seems to freeze while computing the coordinates for displaying. I have looked up the help files on direct entry thinking it might be linked to that but that didn't find any solution.
How can I condense the 'history tree' that lists all the function? Like, putting multiple sketches into one folder and then being able to expand it to display all of them?
View 2 Replies View RelatedIs there a way of getting a family tree of all the parts and sub-assemblies of a main assembly?
I would like this so I can keep track on what parts need drawings (manufactured parts) and if the drawing has been done.