I want to reset the number for the sketches, extrusions, etc. in the browser tree of my template file to start with 01 instead of sketch48 and extrusion69.
I also want to reset the model parameters to start with d0 instead of d485.
The attached image show an example of a simple cylinder that I created from my .ipt template file.
The model tree browser is freezing multiple times per day. Even if I close the browser and re-enable it in the View>User Interface menu, it is still frozen. It wont unfreeze until I close Inventor completely and re-open it.
Dell M6700
Win 7 Pro 64Bit
i7 3720QM 2.6GHz
16 GB RAM
Nvidia Quadro K3000M
When I try to replace a component in Inventor 2014. It replaces it but does not update the tree in the browser. I have to manually delete the part and place a new one in.
View 9 Replies View RelatedI am migrating into Inventor from Solid Works, which had a keyboard short cut for collapsing the parts tree in the browser. Is there a similar command for IV?
View 9 Replies View RelatedI opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies View RelatedIn Inventor Drawing Mode how to select the models in Browser tree using VBA, I think using selectset is not possible in my knowledge. Is there any other way to execute the selection .
View 1 Replies View RelatedI am looking to apply a set part number iproperty to the first, then second, then third components in the assembly browser tree in my iLogic rule, regardless of their current part number. (I need to select them by their position in the browser tree as their part number will vary). How do I do this?
View 1 Replies View RelatedI have a part with very irregular shape created by projecting geometry of other parts.
I wondered if there is any way of calculating area of this extrusion instead of dimensioning the sketch and creating equasions in user parameters?
I have a sketch for a 1.125" tall bounding wall. The inside contour is projected, and the outside contour is offset .125." When I extrude the desired profile, the inside corners, which are project radii, turn inside out. I don't know how else to explain it. I will attach before/after screen shots.
I reboot my PC at lunch because I was getting other odd errors, lots o' C++ runtime joys. That was some two hours ago, and I had a slew of errors/crashes after that around one. Now, no error messages, but this interesting occasion.
In working with Autodesk Inventor I accidentally exited out the menu that displays all my different extrusions and sketches. what this menu is called and how I get it back?
View 2 Replies View RelatedI am trying to extrude sketch 3 to the Extrusion 1 but keep getting Error....is this the wrong way to create?
Also the Extrusion 2 cut out for centre hole does not seem completely round.....
Could this part be made using better techniques.....how can i create this part with better steps
Inventor Edu 2013
I am new to Inventor, running Inventor 2012. I know Solidworks.
I have a sketch with ellipse and then squares inside the ellipse. I am trying to edit the part not create. The program extrudes either ellipse or squares. New problem: the extrusion is picking wrong sketch. I need to finish the part....
I am trying to create a sketch on a face for an extrusion. The sketch has a text box. I am having trouble excluding the text in a sketch otherwise all the closed geometries of the text get extruded.
I created an objectCollection and excluded the TextBox objects. Still not working.
I am trying to creating an extrusion with a sketch containing multiple circles. However, the AddForSolid() Method is not working properly, returning non-NOERROR is C++. Below is the code that I used to create a sketch(which is succeeded) and then try to create a extrusion (in my case cutting).
ApplicationPtr pInvApp;pInvApp.GetActiveObject("Inventor.Application");DocumentPtr pItem;pItem = pInvApp->GetActiveDocument();PartDocumentPtr pDoc;if(pItem->GetDocumentType() == kPartDocumentObject)pDoc = pItem;SelectSetPtr selectedItem;selectedItem = pDoc->GetSelectSet();FacePtr face;//printf("
[code]....
Using Inventor 10, I have replaced several components of my assembly with new copies of the components to be modified into new parts. For some reason the model tree still shows the old part numbers, but editing the parts reveals that they are indeed the new parts. How to correct the part listing in the model tree?
View 9 Replies View Relatedwhat the little symbol that looks like the recycle symbol is in the model tree is? I have several parts in this assembly and many of them seem to have this symbol that says adaptive next to them and I can't find and rhyme or reason to it. I am attaching a screen shot of it. I use Inventor 2012.
View 1 Replies View RelatedIs there a filter ability for the model tree? What I need is I have a part that is buried within a sub assembly that I cannot find. I know the name, but what I am looking for is a tools that allows me to type in it's name and it show me in the tree where it is associated.
View 9 Replies View Relatedfailure to refresh Model Tree after switching configurations - app restart required
We have a user who is getting this message several times per day and must restart his PC. He is the only user of the Inventor Vault product using 2013. We have redone his laptop and and given him a clean laptop with a fresh install of AutoCAD.
I've got a user who is seeing this lock symbol on some Content Center parts in his model tree. I've never seen it before and what is causing it. This results in a lot of errors when he tries to check in any files where this shows up. I can open the same assembly on my machine and the lock does not show up, and I can check the files in with no trouble.
View 1 Replies View RelatedI want to reset my sketch increment on my template so when i start a new part it is on sketch1, not sketch3
I know I can grab the original template and redo it but I am sure I have seen a method to do this.
I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies View Relatedi wanna use a existent project to make a new one, i copy all the files that I need to a new project, then I use Design Assistant to rename all files, everything works fine this way. I just saw now a little 'problem' that doesn't bother me, but can be a problem to other ppl who open this project and see the difference.
When I rename the file name from Design Assistant (opening it from the top assembly), all the parts get its PART NUMBER updated and all the files are renamed too, but...when i open the assembly, in the Model tree, no parts have the name updated, all keeps the old name, but if i open the part from the model tree, i open the correct part already updated and renamed, so, its just the model tree displays name that are incorrect. Is that known ? Is there a solution ? Or am I doing something wrong to copy or rename files ?
I realized that is happens most when i rename files from a top assembly with subassemblies. Sometimes when i use just one assemblie with just parts inside it, everything goes normal.
I am trying to create a Treeview of Model tree which displays parts assembly...etc My code is working well and i am able to get the tree view, but the problem is how can i count the quantity of parts/assemblies and display as consolidated. For instance this below snapshot shows my treeview.
This above snapshot shows my output
Here besides all parts/assemblies i get Semi-Colons and Numbers rather than consolidated view For this part in fig
153049 QSL.1_8.8:1
153049 QSL.1_8.8:3
153049 QSL.1_8.8:3
153049 QSL.1_8.8
and Quantity as 3 separately.
We are trying to add reference lines to the idw drawing for a sub-assembly. These lines represent centerlines of parts of the main assembly. The main assembly is not the reference file for the drawing. However, the required dimension setting the centerlines is a User Parameter in the sub-assembly. (The centerlines are represented by work planes in the sub-assembly file). Using iLogic, we were able to populate the User Parameter from the sub-assembly into the idw file. We can see it as a User Parameter in the idw file. However, when we go into sketch mode the User Parameter is not an option. In sketch mode, we pull a dimension between the two centerlines (d4). When you look at the parameters d4 does not exist so we cannot set d4 equal to our User Parameter (and we've looked there are no filters on). We need this dimension to be able to adjust as the length of the sub-assembly adjusts for different cases. Each case is unique and done on a job by job basis.
There are several places in our drawings where being able to place reference lines and set their relationship to the part would be very useful.
1. Why are the User Parameters not available for use in sketch mode on a drawing?
2. Why can the dimension IDs (ex. d4) not be seen by looking at the parameters?
3. alternative way of putting reference lines on a drawing?
I have several name plates which are embossed, and only the description changes from job to job, but find it a nuisance having to go into the part,edit sketch then edit text! each time I want to change the description .
I was initially going to get round this by creating a form and linking it to the text parameter! But for some reason it won't take in the text parameter I created and will only find and take in numerical parameters?
Is there any way around this? I know it is possible in inventor 2013. I am currently working with Inventor professional 2012.
Switched to the flat pattern of my sheetmetal part and created a sketch.
My intention is/was to control the values of the sketch parameter values using ilogic.
I cannot access these parameters through the ilogic parameter interface or the ilogic rule editor.
I am using ilogic with Inventor 2009 / Inventor 2010 Certified Professional
Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
The attached files are two sprockets. The original part has 30 teeth. I need 34 teeth.
The MODIFIED part has one of my attempts at making 34 teeth. I have tried the following with the same error dialog box (see below):
1. Edit Sketch_6 (associated with Extrusion1) by deleting all but one of the teeth lines (2 arcs and 2 lines that make up a tooth) and making a circular pattern of 34.
2. Same circular pattern, except this time I "Close the Loop" (right-click on one of the teeth line segments > Close Loop > click on all the segments until the loop is closed).
3. Same circular pattern, except this time change the resulting patterned lines into construction lines, trace these lines with arcs and lines of my own (not construction lines), and close the loop on my own lines.
When each of the 3 attempts failed, I tried deleting Extrusion1 and making a new Extrusion feature from Sketch_6. I cannot select what I want in Sketch_6 in order to make the teeth.
I'm at the point where I'm just going to take the dimensions from the circular pattern sketch of 34 teeth, delete Extrusion1 and Sketch_6, and make my own sketch and extrusion.
For the future, I really would like to know - why is it so difficult to alter features like this? Yes, I understand that Sketch_6 is not fully constrained, and on top of this I am not privy to how it was generated in the first place (this is a part file from a vendor). But it does not strike me as something overly complicated for the Extrusion feature to recognize a change in its associated sketch. This is not the first time I have encountered something like this.
What does the red up arrow next to extrussion features indicate?
View 2 Replies View RelatedHow to enable model browser in Autocad Inventor Professional 2014 Student version ?
View 2 Replies View RelatedI'm using VB 2010 express. My code is getting selected part and changing some "Design Tracking Properties" of it. But when I change the properties focus goes from the selected part/sub?... How can I make part selected again? How can I make it focused.I need like below like
invDocument.SetFocus or invDocuments.MakeItSelected like...
Dim asmDoc As AssemblyDocument
asmDoc = inv_App.ActiveDocument
'********
Dim invDocument As Document = Nothing
Dim compOcc As ComponentOccurrence = Nothing
[code]...