AutoCAD Inventor :: Using User Parameters In Drawing Sketch?
Aug 22, 2011
We are trying to add reference lines to the idw drawing for a sub-assembly. These lines represent centerlines of parts of the main assembly. The main assembly is not the reference file for the drawing. However, the required dimension setting the centerlines is a User Parameter in the sub-assembly. (The centerlines are represented by work planes in the sub-assembly file). Using iLogic, we were able to populate the User Parameter from the sub-assembly into the idw file. We can see it as a User Parameter in the idw file. However, when we go into sketch mode the User Parameter is not an option. In sketch mode, we pull a dimension between the two centerlines (d4). When you look at the parameters d4 does not exist so we cannot set d4 equal to our User Parameter (and we've looked there are no filters on). We need this dimension to be able to adjust as the length of the sub-assembly adjusts for different cases. Each case is unique and done on a job by job basis.
There are several places in our drawings where being able to place reference lines and set their relationship to the part would be very useful.
1. Why are the User Parameters not available for use in sketch mode on a drawing?
2. Why can the dimension IDs (ex. d4) not be seen by looking at the parameters?
3. alternative way of putting reference lines on a drawing?
View 4 Replies
ADVERTISEMENT
Apr 23, 2012
I need to copy about 15 user parameters from 1 part to about 300 others. I used the DA to copy the iproperties but the user parameters are also needed.
View 2 Replies
View Related
Jul 18, 2005
Is there a way to create user parameter as TEXT Paramters does not accept the text paramaters . we always have tor create parameters as numbers.
View 9 Replies
View Related
Feb 25, 2013
Is it possible to add a user parameter into a general table in a drawing?
Example:
If I create a multi value text parameter called "Design", and give it two values "open" & "closed". Is there a way to add the chosen value into a general table on the drawing.
Autodesk Product Design Suite 2013
Win 7 Professional 32bit
Intel(R) Xeon(R) W3565 @ 3.2GHz QC
4.0 GB Ram
1GB Nvidia Quadro 2000
View 1 Replies
View Related
Apr 10, 2013
I work with Inventor 2011.
It is possible to sort Parameters (user parameters) by code (simulating a click on column header) ?
View 3 Replies
View Related
Aug 3, 2011
How can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies
View Related
Feb 25, 2013
I have a large collection of parts that are controlled from an exteranl rule. I need to make slight changes to the external rule, but for the changes to be successful I need two extra user parameters to be added to each of the parts. There are hundreds of parts, so going in and adding the two parameters to each would take days.
Is there a simple way of getting the external rule to add the two parameters?
P.s. My VB skills are pretty limited, but my understanding of iLogic is pretty good.
View 2 Replies
View Related
Jul 19, 2013
I made an assembly that adjusted to sized based on some key parameters. These key parameters are controlled by a form in the main assembly. The keys parameters actually adjust the skeleton file, which then drives the frame, then all the parts are adjusted.
after changing these parameters all necessary parts would adjust to size and keep the location constraints. Worked quite well.
The issue now is that, we adopted a new naming convention and this assembly requires all the part files to be renamed. I meticulously saved each part as their new name and then replaced each component in the main assembly. This worked to an extent. The problem that I am facing is that when I saved each part as there new name, the new part retained the linked parameters to the old part. Is there a way to change this link to the newly name skeleton file?
I looked into design assistant for this process as well, but the only changes I think available were to add a prefix or suffix. If worse comes to worse, I can remodel this project but, I am sure there has to be a way to alter this.
attached is a single part with those parameters in the image above.
View 2 Replies
View Related
Jul 11, 2012
I have a part with very irregular shape created by projecting geometry of other parts.
I wondered if there is any way of calculating area of this extrusion instead of dimensioning the sketch and creating equasions in user parameters?
View 9 Replies
View Related
May 1, 2013
I have an IPart with about 100 instances in it that is sheet metal. I created a user parameter for the gauge of the sheet metal relating to the thickness and that works fine in the ipart. My dilema is how to get the gauge to show up in my drawing in the general table. Pretty much I woud like the table to list part number, material and then have a column for the gauge of the steel related to the thickness in the Ipart table. I am using Inventor 2011 if that makes a difference.
View 2 Replies
View Related
Dec 8, 2011
I have some parts with varies User Parameters that allow cusomization of part features. With numeric user paremeters we can check the export parameter box and then, in the description of the part we can refrence that parameter. For instance the description could be: =Width <Width>, Height <Height>, etc. Where it would desplay as Discription: width 22in, height 12".
We also have text User parameters. Is there a way to add these parameters to the description as well? They do not have the option of checking the export parameter box in the parameters table.
View 1 Replies
View Related
Aug 30, 2013
I need import all new params, rules and forms from a new template to older parts. I'm trying to use an external rule to create a new iproperties and import params from xml file but I can't assign these parameters with these iproperties.
I attach the code.
View 3 Replies
View Related
May 21, 2012
I would like to have a rule that will add specific user parameters to a part file. These parameters need to be formatted so the width, depth and thickness will control the description of the part.
IE:
Width=4
Depth=2
Thickness=3/16
DESCRIPTION = TS <Width>X<Depth>X<Thickness>
I would like to format each parameter so that the:
Format=Fractional
Precision=1/16
Unit string=False
This is what I have so far:
oMyParameter=ThisApplication.ActiveDocument.ComponentDefinition.Parameters.UserParameters
oParameter=oMyParameter.AddByExpression("Width", "TOP_RAIL_WIDTH", UnitsTypeEnum.kInchLengthUnits)
oParameter.ExposedAsProperty=True
oParameter.Units="in"
[Code]...
The TOP_RAIL parameters are from a linked file.
View 9 Replies
View Related
Nov 21, 2012
I am trying to export a user parameter that is a text string to a custom I property. I am able to export other parameters to custom properties that are numarical values. I export check box is missing on the text user parameter.
Is there a way to acomplish this with I-logic?
View 5 Replies
View Related
Nov 27, 2012
I have several name plates which are embossed, and only the description changes from job to job, but find it a nuisance having to go into the part,edit sketch then edit text! each time I want to change the description .
I was initially going to get round this by creating a form and linking it to the text parameter! But for some reason it won't take in the text parameter I created and will only find and take in numerical parameters?
Is there any way around this? I know it is possible in inventor 2013. I am currently working with Inventor professional 2012.
View 2 Replies
View Related
Sep 20, 2012
How do I duplicate the 2D line work from a part level sketch into a drawing level (overlay) sketch?
I started a simple 2D piping system diagram sketch by opening a new part file and using a sketch to stick draw the system schematic including some annotations. Then I opened a new drawing file and made a base view of the part file to bring a view of the original sketch into the drawing.
I realize now that it would have been much easier to have created the schematic directly in a 2D sketch at the drawing level, which would have made editing the annotations much easier at the drawing level, and there is really no need for the part file to exist. I have no intention of creating a 3D model or "real" part in the .ipt file, was just using it as a jumping off point to sketch.
I was thinking that I could correct my error in judgment by just copying the sketch and pasting it into a new sketch on the drawing, but it doesn't want to work that way. I have tried copying both the whole sketch at the browser level, and the entire sketch contents (all of the lines and annotations) from the opened part sketch, but when I attempt to paste either of those into the drawing, paste does not seem to be an option. I'd rather not have to draw the whole thing again, as in typical fashion, my once simple sketch has grown in proportion and complexity from its simple beginning.
View 4 Replies
View Related
Aug 31, 2011
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
View 2 Replies
View Related
Jun 24, 2013
Switched to the flat pattern of my sheetmetal part and created a sketch.
My intention is/was to control the values of the sketch parameter values using ilogic.
I cannot access these parameters through the ilogic parameter interface or the ilogic rule editor.
I am using ilogic with Inventor 2009 / Inventor 2010 Certified Professional
View 6 Replies
View Related
May 11, 2004
Wouldn't be nice if you could use part parameters (description, part number, etc...) in the sketch mode text tool?
I'd like to emboss the actual part number on a part without having to retype the part number in manually.
View 1 Replies
View Related
Jun 11, 2013
I want to reset the number for the sketches, extrusions, etc. in the browser tree of my template file to start with 01 instead of sketch48 and extrusion69.
I also want to reset the model parameters to start with d0 instead of d485.
The attached image show an example of a simple cylinder that I created from my .ipt template file.
View 5 Replies
View Related
Jul 26, 2013
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies
View Related
Oct 5, 2012
I have created an assembly containing several parts. I want to export several text parameters of the assembly and parts into the i properties of the corresponding idw so that I can use them in a text block.
View 4 Replies
View Related
Nov 12, 2013
I am working in one assembly. in that assembly i created all the part with using i part & same part i called in to the assembly & created i assembly. while creating drawing i have facing problem to show the model parameters in to the assembly drawing table. How to link the model parameters in assembly parameters with using i assembly.
View 1 Replies
View Related
Jun 26, 2012
I am running into some trouble with user parameters that have been inserted into a dimension's "text box". I sometimes hide the dimension itself and insert these parameters so that iLogic can manipulate the upper & lower tolerance limits for a dimension.
The problem seems to arrise anytime one of the dimension's arrows becomes detached from the drawing (and perhaps for other reasons, too, although this is the only clear cause so far). I can reattach the arrow and the dimension seems healthy again, but if I go into the text editor, I notice that the link to any parameters that I've inserted has been lost. They appear as they were last set, but will not update if the parameters themselves change.
Is there a better workaround for this, or can we expect a solution in IV2013? I've invested close to a year's worth of work expecting this method to perform properly, and it will be a letdown if there's no solution.
View 1 Replies
View Related
Mar 23, 2012
I am using parameters from a .ipt file to display dimensional information on a drawing file I have created (the fields colored red are the parameters it is reading). How do I get them to display as fractions instead of decimal? I want it to read 5"1/2 instead of 5.5", for instance. I have tried inputting them as fractions in the parameters dialog in the part file, but no luck, they still come out as decimal.
See attachment for reference.
View 1 Replies
View Related
Dec 20, 2010
Moving right along with my Parametric Block programming tools. I have successfully created several linked parameters with formulas and values, and now I want to be able to show a select few of them in the Properties Palette (NOT Parameters Manager) for the inserted block ref. Taken from Stephen's example, here is my code for creating the AssocVariable (User Parameter)
Public Function AddOrModifyVariable(ByVal varName As String, ByVal varExpression As String, ByVal sourceObjectID As ObjectId, ByVal trans As Transaction) As ObjectId Dim db As Database = sourceObjectID.Database Dim varId As ObjectId = ObjectId.Null Using trans2 As Transaction = trans.TransactionManager.StartTransaction() ' Open the AssocNetwork Dim networkId As ObjectId = AssocNetwork.GetInstanceFromObject(sourceObjectID, True, True, "") Dim network As AssocNetwork = DirectCast(trans2.GetObject(networkId,
[code]...
I don't know if I need to create a dynamic block property (or if that can be done), or somehow get this AssocVariable to display on its own.I also noticed that the example for creating a parametric Dimension object, does not set the dimension to the right type of Dynamic dimension. (Play with the Constraint From property in the properties palette, be sure to regen in between).
View 3 Replies
View Related
Aug 17, 2012
I’m looking to do a drawing of a content center file that has a table associated with it. I’m looking to do a table much like the general table option that pulls in parameters of a std. part. I understand that content center files have no intelligence to thread data but If there is no easy way of doing that I may need to pull in an excel sheet that has the data I need.
Ultimately I would like a table that has the part #, “Dim A”, “Dim B”, etc. that links to text dimensions on the content center part view in the drawing.
The reason I want it to be a content center file is that I have a couple hundred parts that only differ by one or two dimensions and don't want to have to go through that many drawings to update and make changes to.
I am using Inventor 2012 Pro
View 4 Replies
View Related
Oct 11, 2012
I have created various symbols to be placed into drawings when required, rather than having to re-create the same sketch every time the drawing is produced.
When I place the symbol I am given the option to select where to insert it, based on the insertion point. The problem is... once the symbol is placed there is no way (that I can figure out) to constrain to the view or dimension to it.
View 8 Replies
View Related
Jan 26, 2012
Is there a way to create a table to display parametric information -- either Dimensional Constraint Parameters or User Parameters? This can be done with Inventor but I haven't yet found a way to do this in AutoCAD. I've also considered Data Extraction but this doesn't seem to recognize parameters.
View 1 Replies
View Related
Dec 18, 2013
Cant figure this out - I create a sketch in a drawing, but I cant see the lines as I'm drawing them. The lines are on a "solid" layer set to red as defined in my standard. The background of my drawings is black. When the line command is done, the line appears and it's red. Problem is I cant see it as I'm sketching. Is there any way to modify this? Can I have the line appear red (or white) as I'm sketching?
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
View 2 Replies
View Related
Aug 2, 2013
I'm a student and a beginner in VBA. I'm writing a macro to automatically draw text and lines in a drawing and it goes pretty well. But now I have encountered a problem. When I add text like this:
Dim FreqBox As TextBox
Set FreqBox = oSketch.TextBoxes.AddFitted(oTG.CreatePoint2d(1.9, 1.95), GegevensForm.FrequentieVak.Value)
This is like I want it, but not the right font or size, so I add this:
FreqBox.Style.Font = "Arial"
FreqBox.Style.FontSize = 0.2
This goes well too, but then I want to add another TextBox, in another style, like this:
Dim VermogenBox As TextBox
Set VermogenBox = oSketch.TextBoxes.AddFitted(oTG.CreatePoint2d(3.7, 3.2), GegevensForm.VermogenVak.Value)
VermogenBox.Style.Font = "Arial"
VermogenBox.Style.FontSize = 0.5
VermogenBox.HorizontalJustification = kAlignTextRight
VermogenBox.Style.Bold = True
And suddenly when I run this, the other text is changing to these settings... (exept for the alignment).Is it possible to do this without the FormattedText option
View 1 Replies
View Related
