AutoCAD Inventor :: IPart User Parameters In IDW General Table?
May 1, 2013
I have an IPart with about 100 instances in it that is sheet metal. I created a user parameter for the gauge of the sheet metal relating to the thickness and that works fine in the ipart. My dilema is how to get the gauge to show up in my drawing in the general table. Pretty much I woud like the table to list part number, material and then have a column for the gauge of the steel related to the thickness in the Ipart table. I am using Inventor 2011 if that makes a difference.
View 2 Replies
ADVERTISEMENT
Dec 20, 2012
How can I display iPart parameters in an iAssembly general table?
On my .dwg I would like to use one detail with a table. The 2 table columns I need are:
(1) iAssembly name (no problems here, shows up in the general table by default)
(2) Length (this parameter value is in the iPart)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
View 8 Replies
View Related
Oct 21, 2008
I have an iPart that I have created parameters to perform some basic calcs so the values will show up on every member. The parameters are correct for the different member so it appears to be working correctly on the model side. For example I have a parameter called 'CutLength' that performs simple math functions. But when I make the table on the drawing and I include this parameter, I see the formula in the table instead of the value. Is there a way I can have it display the value instead of the equation?
View 2 Replies
View Related
Jan 26, 2012
Is there a way to create a table to display parametric information -- either Dimensional Constraint Parameters or User Parameters? This can be done with Inventor but I haven't yet found a way to do this in AutoCAD. I've also considered Data Extraction but this doesn't seem to recognize parameters.
View 1 Replies
View Related
May 18, 2012
I am not a regular user of the Inventor General Table. I can make and edit the table with no problems. I want to eliminate the lines from one of the columns while leaving the lines in the remaining columns. I tried to set up the column before inserting it but could not find the column format that would allow me to do that in the Style Editor.
How to do this. I need to also remove the (read only) from the Style Editor.
View 7 Replies
View Related
Apr 15, 2013
I'm creating an iPart for Content Centre authoring. I have an Emboss feature that I would like to cut 2 text values into a face. I'm having trouble figuring out how to acheive this through the iPart table. I started by making 2 User Parameters multi-value but came to an abrupt halt as I can't see them in the Table. And I suspect that this approach won't work anyway.
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
View 4 Replies
View Related
Sep 10, 2013
Is it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
View 1 Replies
View Related
Mar 27, 2013
I have an ipart which is being controlled by an external spreadsheet. Each cell references a cell within a spreadsheet on my local drive. I have a set a parameters that are used to completely define each part but I am also interested in some of the reference parameters (from driven dimensions) so that I can analyze relationships between reference and input parameters. Is it possible (without extensive programming in windows VB or other) to export data from this iPart into, prefereably, the driving spreadsheet or another spreadsheet?
View 3 Replies
View Related
Aug 17, 2011
I am trying to make an iPart of a fitting where I can change the "Body type" and it will change all the parameters associated with that body type through iLogic. Really I am just playing around in iLogic to see if this is something worth learning. Back to the point, I would like to change a multi-value user text parameter through the iPart table but I cannot find the paramter in the parameters tab.
Since it is a user parameter I thought it would be in the "Other" folder but it isn't. I do however have the other multi-value user number parameter in that folder, which makes me think that maybe I can't use the paramter in the iParts table?
INV 2012 SP1
Windows 7 64 Bit
ATI FirePro V5800
14.0 GB RAM
View 9 Replies
View Related
May 31, 2013
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies
View Related
Nov 27, 2011
Having this issue with IE9? I have a table driven iPart that has an expression in the description field. The expression is =PL <THICK> x <WIDTH>, so that as the thickness and width change the description of this plate also changes. I have recently added rows to this part for the use of bar instead of plate on certain shapes. In order for the bar description to match standard steel shape nomenclature the expression on these parts needs to be =BAR <WIDTH> x <THICK>. How can I add the description to the iPart table so that I can simply edit the bar parts to be as needed?
Some things to note:
1.) These are custom iParts so when the item is inserted you select the thickness, file name, save location, etc.
2.) There are about 705 lines to this iPart right now and I would prefer not to go higher.
3.) I would like to keep these as the same iPart instead of having two different files.
4.) I need the description to be an expression because long after these parts are placed, they sometimes change and I need the dimensions to update after the fact like all our other parts (so don't forget that these one won't and then the drawings are incorrect).
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 3 Replies
View Related
May 18, 2012
I am using the VBA need to replace the contents of table cells in columns iPart MemberName PartNumber. By what teams can do this?
View 1 Replies
View Related
Dec 9, 2011
I am looking for a way to add a new row to my ipart table.
I am able to get to the excel worksheet.
But from there, I can I save it? Will that add a new row to the table?
Dim oiPartFactory As iPartFactory
Set oiPartFactory = oCompDef.iPartFactory
Dim FactorySheet As WorkSheet
[Code]....
View 1 Replies
View Related
Jun 24, 2013
I have some manufacturing dimensions that are an end result of my design so they are driven dimensions at the end of my modeling history and pulled into the ipart table. If I make some design changes I need these dimensions to update too. The problem is they do not automatically update and require a manual activation of each child memeber for the dimension to update.
The dreaded "The Values in the active row don't match the document's current values. do you wish to update the table before continuing" Click, enter, Click, enter, Click, enter.
Autodesk Inventor 2012 Certified Assosicate
Autodesk Inventor 2012 Certified Professional
View 1 Replies
View Related
Nov 1, 2012
I've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
View 1 Replies
View Related
Aug 14, 2011
The question I want to ask is about reference dimensions in iPart.
I can create a sketch and place reference dimensions on it, there's no problem. I can activate any configuration manually and see the reference dimensions adjusted according to configuration, no problem again.
I would like to know — is it possible to automatically populate column of the iPart table with reference dimension value, as it stands for each configuration?
I was able to find some solution for that, but it's not automatic. I can mark reference dimension of export, and add it as a column to the table, but I need to manually activate each configuration to populate the column with measured reference value. Not very good, because there can be very many configurations.
How to automatically get complete list of reference dimensions values for each configuration of the iPart?
View 1 Replies
View Related
Apr 24, 2012
How can i access and get details of ipart Table. Even if i want to modify are there any chances of doing them
View 2 Replies
View Related
Jul 16, 2012
Is there is any way to re-arrange the columns in my ipart table without having to delete all of my parameters and then adding them back in the order that I want them to appear in? I would like certain information grouped together instead of having to scroll back and forth across the row to edit certain parameters.
View 5 Replies
View Related
May 17, 2012
In ipart there is an option to add and delete rows when working with inventor graphically.I have displayed the iPart table and the values in gridview using VB.Net.
The user then selects the row in datagridview and clicks the button delete.When the button onclick even is triggered i want to delete the selected row on ipart table inside inventor.
View 3 Replies
View Related
Mar 26, 2013
I have created an iPart which uses the Hole Feature (counterbore hole). The hole is not threaded. Is there a way to put the Hole Feature into the iPart table so when a user enters specific values, he/she could type in or select a bolt size and the counter bore hole feature will use the correct dimensions for said bolt size (ie. I would like the counterbore holes for an M6 Socket Head Cap Screw. So instead of typing in the counterbore hole diameter, depth, and bolt diameter, etc... it would automatically enter the default values.) Or is this something that must use iLogic?
View 6 Replies
View Related
Oct 26, 2012
Inventor 2012
Can equations like this cell equals this cell be used in the Ipart or Iassembly family tables?
View 2 Replies
View Related
Aug 14, 2012
I’m currently running Inventor 2010. Is there a way I can override the calculated physical mass and drive the mass value with a column in the ipart table?
View 4 Replies
View Related
Apr 19, 2011
How to add a volume column to ipart author table?
Evantually I need to display a table with part weights.
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
May 11, 2011
Get a message "Failed to export desel table" when i try to create an iPart, i have excel installed.
View 4 Replies
View Related
Feb 27, 2013
I have two tables on a drawing one showing a parts list the other changes to dimensions.
The table to show the dimension changes is a configuration table pointing to an ipart.
iLogic is used to update the ipart but you have to right click to update the Active Member in the ipart to see the drawing update.
Is there a way to automate the 'update active member'? (on the ipart table - this does update the drawing)
I just have the one row in the table, it's purpose was to pass the values onto the drawing (as the part resizes I didn't want the dimensions moving so opted to tabulate them) - hoping they would update!
or
Is there a way to have a table update parametrically i.e. I've tried .csv as a source to the table but can't force an update. This way I could scrap the ipart & just import the values to a table.
The table also includes some txt comments which change with the ipart properties.
View 1 Replies
View Related
Jul 25, 2013
We are using Inventor and Vault pro 2013.
I have an iPart in which I want to change the File Name Column from "Member" to "Part Number". These columns are not the same and makes the filenames for the members different when generated.
The challenge is that I already have about 100 members generated and used in different assemblies. I want these to be replaced by the new files and be deleted.
If I change the File Name Column I will get 100 new files (ipart members) that is not used anywhere. The only way I know of to replace the 100 "old" members is to do this in Vault - one by one..
View 4 Replies
View Related
Apr 23, 2012
I need to copy about 15 user parameters from 1 part to about 300 others. I used the DA to copy the iproperties but the user parameters are also needed.
View 2 Replies
View Related
Jul 18, 2005
Is there a way to create user parameter as TEXT Paramters does not accept the text paramaters . we always have tor create parameters as numbers.
View 9 Replies
View Related
Feb 25, 2013
Is it possible to add a user parameter into a general table in a drawing?
Example:
If I create a multi value text parameter called "Design", and give it two values "open" & "closed". Is there a way to add the chosen value into a general table on the drawing.
Autodesk Product Design Suite 2013
Win 7 Professional 32bit
Intel(R) Xeon(R) W3565 @ 3.2GHz QC
4.0 GB Ram
1GB Nvidia Quadro 2000
View 1 Replies
View Related
Apr 17, 2013
Basically I need to have 2 configurations of an assembly. These assemblies are identical except there is one part that will vary within them. Eventually I would like to be able to drive an assembly with multiple part configurations and suppressing and unsuppressing of parts from a table however this is my starting spot.
View 2 Replies
View Related
Aug 22, 2011
We are trying to add reference lines to the idw drawing for a sub-assembly. These lines represent centerlines of parts of the main assembly. The main assembly is not the reference file for the drawing. However, the required dimension setting the centerlines is a User Parameter in the sub-assembly. (The centerlines are represented by work planes in the sub-assembly file). Using iLogic, we were able to populate the User Parameter from the sub-assembly into the idw file. We can see it as a User Parameter in the idw file. However, when we go into sketch mode the User Parameter is not an option. In sketch mode, we pull a dimension between the two centerlines (d4). When you look at the parameters d4 does not exist so we cannot set d4 equal to our User Parameter (and we've looked there are no filters on). We need this dimension to be able to adjust as the length of the sub-assembly adjusts for different cases. Each case is unique and done on a job by job basis.
There are several places in our drawings where being able to place reference lines and set their relationship to the part would be very useful.
1. Why are the User Parameters not available for use in sketch mode on a drawing?
2. Why can the dimension IDs (ex. d4) not be seen by looking at the parameters?
3. alternative way of putting reference lines on a drawing?
View 4 Replies
View Related
