How can I display iPart parameters in an iAssembly general table?
On my .dwg I would like to use one detail with a table. The 2 table columns I need are:
(1) iAssembly name (no problems here, shows up in the general table by default)
(2) Length (this parameter value is in the iPart)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
I have an IPart with about 100 instances in it that is sheet metal. I created a user parameter for the gauge of the sheet metal relating to the thickness and that works fine in the ipart. My dilema is how to get the gauge to show up in my drawing in the general table. Pretty much I woud like the table to list part number, material and then have a column for the gauge of the steel related to the thickness in the Ipart table. I am using Inventor 2011 if that makes a difference.
View 2 Replies View RelatedIn a simple case I have an extrusion with some attached seals/weather stripping, all implemented as iParts having their own LENGTH parameters.
RailPart.ipt, Seal_A.ipt, Seal_B.ipt
The goal is to encapsulate these IParts within an iAssembly: RailAssy.iam, where a LENGTH parameter can be input when the iAssembly is placed, causing RailPart and Seal_A to have their length parameters set to the LENGTH provided at that time and SEAL_B having Length set by an iLogic rule to LENGTH - 5.
I've been unable to set up a Custom Parameter Column in an iAssembly table. Is this even permitted?
Inventor Premium 2012 SP1
I have an iPart that I have created parameters to perform some basic calcs so the values will show up on every member. The parameters are correct for the different member so it appears to be working correctly on the model side. For example I have a parameter called 'CutLength' that performs simple math functions. But when I make the table on the drawing and I include this parameter, I see the formula in the table instead of the value. Is there a way I can have it display the value instead of the equation?
View 2 Replies View RelatedI am using Inventor Professional 2012 and I have created complex iparts and iassemblies and I am not able to change the BOM structure of the parts simply because they are intelligent. I require the tables and features that the iparts and iassemblies can create but they are coming up read only and can not modify the BOM information. Is there a way to change the read only aspect of an ipart or iassembly?
View 1 Replies View RelatedWhat I am looking for is a command similar to table replace, but that will allow for a new part to be created based on a user input. This will need to be done at the i Assembly level to an i Part that is placed within the assembly.
The end goal is to have input boxes come up, ask the user for the values then create all of the associated parts.
I don't need anything with the input boxes, just the part creation.
I am looking for a way to change the parameters of a part that is within an iAssembly. Basically we have tubing with flanges on the end and wish to have an easy way to model varying lengths. I essentially need to be able to have the upper level iAssembly control the flange spacing and cut the tube to length based on the users selection. Due to BOM setup these parts must be seperate .ipt in a larger .iam
View 2 Replies View RelatedI have tried to use the command retrieve dimensions for an iPart and iAssembly but no dimensions will appear
View 6 Replies View RelatedI'm having an issue with Inventor crashing every time I attempt to follow this exact procedure:
1. I have a drawing open with an iAssembly or iPart in it.
2. I edit a view by double-clicking the view, opening the 'Drawing View' dialog box.
3. I open the 'Model State' tab.
4. In the 'iAssembly/iPart Member' menu box, I select a different member.
Now, it may or may not open the 'Save' dialog box. If it does, then I click 'OK' and poof, Inventor crashes without fail, asking to send in a crash report.
The same thing happens if I start a brand new drawing and attempt to follow the same procedure while inserting a Base view.
Now, I know for a fact that the not all of the drivers are not up to date on my computer, I am not using a recommended graphics card, and I am using SP1.1, not SP2. I have notified my IT guy about this, but he has yet to get back to me. I don't now if/when everything on my computer will be updated. I do not have admin rights to my computer.
In the mean time, Inventor has become essentially useless for me until this issue has been resolved. how I can get these drawings to start working?
I have made a simple iPart with the option to suppress an extrusion. How do I control this in an iAssembly?
View 3 Replies View RelatedRecently upgraded to Windows 7 from XP and changed from a laptop to a desktop. With the laptop I used dual monitors; to date I haven't secured a second monitor from IT for true dual monitors.
Well I have some iParts that I've edited using excel and they have formulas that I can't edit using the standard iPart dialog, but when I click "Edit via Spreadsheet" the window opens off screen. The alt+Spacebar method doesn't work in Windows 7 and the Windows 7 method of shift+right-click isn't an option because Excel doesn't appear on the taskbar and selcting Inventor moves the Inventor window, not the instance of excel inside of inventor.
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
Inventor does not think an update is required for iAssembly members after changes to attributes on a client feature are saved. In our workflow we avoid rebuild all because it causes subassemblies to change, so we force an update by changing a parameter. Through the API is there a good way to indicate that our change was significant enough for members to need updating?
View 4 Replies View RelatedHow we can access the part parameters after hitting create iAssembly. do I need to make i parts first and then bring them to an assembly and make an iAssembly??
View 5 Replies View RelatedI am creating an iAssembly with iParts. Some of the iParts have the "Table Replace" colum option and some do not. Both iParts have tables with members and part numbers. See pic.
View 3 Replies View RelatedIs there any way to insert a generic table into an assembly file. I don't want to create an iAssembly or use the data to configure the component in any way. I would just like to be able to maintain some design related information within the assembly file, similar to the tables that you can create in an idw. A table just like the iAssembly table would be fine, minus the iAssembly part or any sense of configuration.
View 4 Replies View RelatedI am trying to come up with an automatic method to add a new row to my i assembly table and populate that row based on values entered by the user (assuming that combination of values doesn't already exist... ). Basically, I wish to build my i assembly table on demand over long term by user input via a form that calls an ilogic rule.
View 1 Replies View RelatedI have created two iParts, both with corresponding tables which I then put into an iAssembly so I can change the size of a pad eye and two cheek plates depending upon the desired Working Load Limit. I have a very basic form right now with a drop down menu to chose the different Safe Working Loads but whichever one I choose, is not changing the table configuration to the desired size. Clearly my iLogic code is not working the way I would like. See below and also see attached screen shots so you know what I am working with.
If Parameter("SWL") = "4.75Te" Then
iPart.ChangeRow("PADEYE iPART - IMPERIAL:1", "WLL = 4.75Te")
iPart.ChangeRow("CHEEK PLATE iPART:1", "WLL = 4.75Te")
iPart.ChangeRow("CHEEK PLATE iPART:2", "WLL = 4.75Te")
ElseIf Parameter("SWL") = "6.5Te" Then
iPart.ChangeRow("PADEYE iPART - IMPERIAL:1", "WLL = 6.5Te")
[code]........
This code was actually overwriting the table properties (in excel), so I know this is wrong, I just couldn't find any snippet for changing a table configuration .
I have created two table rows in an iAssembly that I would like to have a iLogic code written for.
What do I need to use to trigger between these two, when, for instance, a certain numeric value is entered in the parameters? Within the assembly file, when I use the iPart.ChangeRow (or iAssembly.ChangeRow) and put the . I am filename in the first spot, it says it cannot find the file.
This is what I am using, and the error states it cannot find the . i am file I am referencing.
IfParameter("Window_Cutout_Vertical")<=1AndParameter("Window_Cutout_Horizontal")<=1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-02")ElseIfParameter("Window_Cutout_Vertical")>1AndParameter("Window_Cutout_Horizontal")>1TheniAssembly.ChangeRow("A60_RHR_Door_Assembly.iam", "A60_RHR_Door_Assembly-01")EndIf
what the best way to show 2 different subassemblies based on the same iAssembly... I would expect a "custom" option as there is from the content center. If I try and change the table for one, the other instance gets updated, and I would like it to stay the same. I understand that this would require a new "branch" in the BOM holding the different sized parts, but there must be a way to accommodate this?
View 1 Replies View RelatedHow to edit the member name in an iassembly table using code? The Part Number and Description iproperties are easy to handle. But I am stuck on how to access the member name and edit it. I guessed at some methods, but keep getting errors.
View 4 Replies View RelatedI'm making my first iAssemblies and have run into a strange problem.
I have the option to add the Table Replace column for iParts, but this option isn't avialeble for parts inserted from content center.
I am not a regular user of the Inventor General Table. I can make and edit the table with no problems. I want to eliminate the lines from one of the columns while leaving the lines in the remaining columns. I tried to set up the column before inserting it but could not find the column format that would allow me to do that in the Style Editor.
How to do this. I need to also remove the (read only) from the Style Editor.
I have an ipart that uses a simple form to control its length. This part is used in an iassembly whic has other forms to control constraints.
I would like to be able drive the ipart form from inside the assembly.
In the column Description from a I-assembly table I will place the text Test<200. Than I get a error message "Detected potentially damaging errors in the table. Unable to interpret cel: " ". It goes wrong with this symbol <. How do i get this symbol normal as a text in this column?
View 5 Replies View RelatedI'm creating an iPart for Content Centre authoring. I have an Emboss feature that I would like to cut 2 text values into a face. I'm having trouble figuring out how to acheive this through the iPart table. I started by making 2 User Parameters multi-value but came to an abrupt halt as I can't see them in the Table. And I suspect that this approach won't work anyway.
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V7800 2 GB, 180 GB SSD & 1 TB HDD, Inv R2013 PDS Premium SP2 Update 3 (Build 200), Vault 2013 Workgroup Update 2 (Build 17.2.9.0)
Is it possible to change the parameters of a custom ipart in an assembly after it has been inserted, or can I only do an insert using AddCustomiPartMember?
In that case I simply remove the previous occurrence and insert a new one I suppose?
I have an ipart which is being controlled by an external spreadsheet. Each cell references a cell within a spreadsheet on my local drive. I have a set a parameters that are used to completely define each part but I am also interested in some of the reference parameters (from driven dimensions) so that I can analyze relationships between reference and input parameters. Is it possible (without extensive programming in windows VB or other) to export data from this iPart into, prefereably, the driving spreadsheet or another spreadsheet?
View 3 Replies View RelatedIs it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies View RelatedHaving this issue with IE9? I have a table driven iPart that has an expression in the description field. The expression is =PL <THICK> x <WIDTH>, so that as the thickness and width change the description of this plate also changes. I have recently added rows to this part for the use of bar instead of plate on certain shapes. In order for the bar description to match standard steel shape nomenclature the expression on these parts needs to be =BAR <WIDTH> x <THICK>. How can I add the description to the iPart table so that I can simply edit the bar parts to be as needed?
Some things to note:
1.) These are custom iParts so when the item is inserted you select the thickness, file name, save location, etc.
2.) There are about 705 lines to this iPart right now and I would prefer not to go higher.
3.) I would like to keep these as the same iPart instead of having two different files.
4.) I need the description to be an expression because long after these parts are placed, they sometimes change and I need the dimensions to update after the fact like all our other parts (so don't forget that these one won't and then the drawings are incorrect).
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I am using the VBA need to replace the contents of table cells in columns iPart MemberName PartNumber. By what teams can do this?
View 1 Replies View RelatedI am looking for a way to add a new row to my ipart table.
I am able to get to the excel worksheet.
But from there, I can I save it? Will that add a new row to the table?
Dim oiPartFactory As iPartFactory
Set oiPartFactory = oCompDef.iPartFactory
Dim FactorySheet As WorkSheet
[Code]....