I have an ipart that uses a simple form to control its length. This part is used in an iassembly whic has other forms to control constraints.
I would like to be able drive the ipart form from inside the assembly.
From iLogic i got a lot of information. And i want to configure or display this in a form.
But without having to make parameters for everything.
Example:
Display the stocknumber of an ipart/iassembly.
Configure the parameters from a part in the main assembly.
I have made a simple iPart with the option to suppress an extrusion. How do I control this in an iAssembly?
View 3 Replies View RelatedWhat is the best way to make art forms with inventor?
View 9 Replies View Relatedhow to delete iLogic forms from Inventor 2013 parts/assembly using VB.net 2010?
I am able to delete all the rule using "Activated_iLogic.DeleteAllRules(PartDoc)" but "Activated_iLogic.DeleteAllForms(PartDoc)" or "Activated_iLogic.DeleteForm(PartDoc, FormName)" does not give me the result I was expecting and Google is not showing any result related to this.
I am just playing with iLogic forms and I have set a slider to move a part in 15 degree steps from 90 to 180 degrees, all is fine but the slider is on the left for 90 degrees and on the right for 180 degrees, I would like it to be able to be set so that 180 is on the left of the slider and 90 is on the right of the slider. is this possible?
View 3 Replies View RelatedI'm trying to build a simple ilogic form to fill out iproperty infomation for parts we generate. Our company only uses a few of fields that are available. The problem is that the Physical tab is not available in the form editor. I would like to add this field to my form to be able to select the material for the part. The style/standard editor in our part template file holds all materials we use. Summary, Project, Status, and Custom are all available, why isn't Physical?
View 9 Replies View RelatedI have a small problem with iLogic forms picture folder. Is there a way of seting the image by the selected tab ?
I want to update the image by the tab selection.
I have tried "if" or "select case" and neither one worked. as I am saying Stair_Properties = True it only makes the tab active. It doesnt indicate if it is selected, here is the code :
If Stair_Properties = True ThenImage = "Image 01"End IfIf Railing_Properties = True ThenImage = "Image 02"End IfIf Riser_Properties = True ThenImage = "Image 03"End If'Select Case Image'Case Stair_Properties'Image = "Image 01"'Case Railing_Properties'Image = "Image 02"'Case Riser_Properties'Image = "Image 03"'End Select
I would like to know if it is possible to make a form with multiple forms, depending on the selection a could build a rectangle, or a cilynder or a cone.
View 3 Replies View RelatedWhat is it for and how do I use it? Will it allow me to switch between different pictures for display on my iLogic form?
If so? How do I set which picture to display?
how to create a check box for parameters in forms in inventor 2013, i have modelling a door which contains to many types of locks and where they are placed so i need to create check boxes to pick multiple items so i need to know how to insert them.
View 8 Replies View RelatedI had some success transferring geometries, generated with an advanced math software, to Inventor using IGES files containing Manifold Solid B-Rep Object Entities (Type 186) (see the specification IGES5-3_forDownload-1.pdf). Now I would like to include several Type 186 entities into a single IGES file and form the geometrical unit of these (and them), for which the IGES Boolean Tree Entity (Type 180) seems to exist. I'll do some trial-and-error testing, but it would be very useful to have a (reliable) list of all IGES entities the Inventor IGES import function does or does not support (like these: Transcendata, MoldflowInsight). Unfortunately I could not find such a list anywhere.
Another question: Are the IGES import/export functions of Inventor written by Autodesk (and/)or are third-party libraries used? If the latter, which ones?
I set up a Form in Inventor using parameters that are driven from Excel. I cannot edit the form.
View 6 Replies View RelatedAleays that I change the selection "MODO" ("D e i" instead of "Z1 e Z2" and vice-versa), I need run one more time for the rule sense the changing.. when the right is run one time.
iLogicForm.Show("FLAMA-GEARS", FormMode.Modal) If MODO = "D e i" Then iLogicForm.Show("D e i", FormMode.Modal) End If If MODO = "Z1 e Z2" Then iLogicForm.Show("Z1 e Z2", FormMode.Modal) End If
I would like to instantly launch an External Rule just by clicking on a button in the Global Forms area of the iLogic browser. Is this possible, and if so, how would I do it?
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
I am using Inventor Professional 2012 and I have created complex iparts and iassemblies and I am not able to change the BOM structure of the parts simply because they are intelligent. I require the tables and features that the iparts and iassemblies can create but they are coming up read only and can not modify the BOM information. Is there a way to change the read only aspect of an ipart or iassembly?
View 1 Replies View RelatedWhat I am looking for is a command similar to table replace, but that will allow for a new part to be created based on a user input. This will need to be done at the i Assembly level to an i Part that is placed within the assembly.
The end goal is to have input boxes come up, ask the user for the values then create all of the associated parts.
I don't need anything with the input boxes, just the part creation.
I am looking for a way to change the parameters of a part that is within an iAssembly. Basically we have tubing with flanges on the end and wish to have an easy way to model varying lengths. I essentially need to be able to have the upper level iAssembly control the flange spacing and cut the tube to length based on the users selection. Due to BOM setup these parts must be seperate .ipt in a larger .iam
View 2 Replies View RelatedI have tried to use the command retrieve dimensions for an iPart and iAssembly but no dimensions will appear
View 6 Replies View RelatedI'm having an issue with Inventor crashing every time I attempt to follow this exact procedure:
1. I have a drawing open with an iAssembly or iPart in it.
2. I edit a view by double-clicking the view, opening the 'Drawing View' dialog box.
3. I open the 'Model State' tab.
4. In the 'iAssembly/iPart Member' menu box, I select a different member.
Now, it may or may not open the 'Save' dialog box. If it does, then I click 'OK' and poof, Inventor crashes without fail, asking to send in a crash report.
The same thing happens if I start a brand new drawing and attempt to follow the same procedure while inserting a Base view.
Now, I know for a fact that the not all of the drivers are not up to date on my computer, I am not using a recommended graphics card, and I am using SP1.1, not SP2. I have notified my IT guy about this, but he has yet to get back to me. I don't now if/when everything on my computer will be updated. I do not have admin rights to my computer.
In the mean time, Inventor has become essentially useless for me until this issue has been resolved. how I can get these drawings to start working?
How can I display iPart parameters in an iAssembly general table?
On my .dwg I would like to use one detail with a table. The 2 table columns I need are:
(1) iAssembly name (no problems here, shows up in the general table by default)
(2) Length (this parameter value is in the iPart)
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
Recently upgraded to Windows 7 from XP and changed from a laptop to a desktop. With the laptop I used dual monitors; to date I haven't secured a second monitor from IT for true dual monitors.
Well I have some iParts that I've edited using excel and they have formulas that I can't edit using the standard iPart dialog, but when I click "Edit via Spreadsheet" the window opens off screen. The alt+Spacebar method doesn't work in Windows 7 and the Windows 7 method of shift+right-click isn't an option because Excel doesn't appear on the taskbar and selcting Inventor moves the Inventor window, not the instance of excel inside of inventor.
2013 Product Design Suite Ultimate
Windows 7 Sp1
Intel(R) Core (TM) i5-2400 @ 2.00GHz
6.00 GB of RAM
AMD Radeon HD 6570
Inventor does not think an update is required for iAssembly members after changes to attributes on a client feature are saved. In our workflow we avoid rebuild all because it causes subassemblies to change, so we force an update by changing a parameter. Through the API is there a good way to indicate that our change was significant enough for members to need updating?
View 4 Replies View RelatedI'had just met another matter for my Add-on. I noticed that when I instance a new drawing, while a first one is opened, when I load a new Form, this one keep all first drawing's properties. What could happen?
For example, I would like to add the layer list on a ComboBox.
My source:
Private Sub LayerBox_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load '***************************' '* Initialisation LayerBox *' '***************************' Using acTrans = acCurDb.TransactionManager.StartTransaction() acLyrTbl = acTrans.GetObject(acCurDb.LayerTableId, OpenMode.ForRead) For Each acObjId As ObjectId In acLyrTbl acLyrTblRec = acTrans.GetObject(acObjId, OpenMode.ForRead) ComboBox1.Items.Add(acLyrTblRec.Name) Next acObjId End Using End Sub
This source works, but if i instance a new form on a new drawing, the first drawing's layer list is kept and the new layer list on the second drawing is ignored!
Can you round over existing solid forms in autocad 2010. My solid is 30mm thick and I want to round-over the edges with a 6.5mm radius.
View 2 Replies View RelatedIn a simple case I have an extrusion with some attached seals/weather stripping, all implemented as iParts having their own LENGTH parameters.
RailPart.ipt, Seal_A.ipt, Seal_B.ipt
The goal is to encapsulate these IParts within an iAssembly: RailAssy.iam, where a LENGTH parameter can be input when the iAssembly is placed, causing RailPart and Seal_A to have their length parameters set to the LENGTH provided at that time and SEAL_B having Length set by an iLogic rule to LENGTH - 5.
I've been unable to set up a Custom Parameter Column in an iAssembly table. Is this even permitted?
Inventor Premium 2012 SP1
I am using acad 2012, and VS 2010 (C#) on win 7 64 bit.
I made a form, and showing it as modeless via Application.ShowModelessDialog... as recommended by everyone and that works fine.
I have a button that does something, and I set a break point right on the first line of code for its callback.
The button runs fine, but VS is not stopping at the break point.
Is there a different technique required when debugging modeless forms?
[URL]
I have a serious problem with Photoshop cs6 during the drawing with a large number of forms (about 30 ...).Appear in drawing the colored squares, lines and other defects, randomly placed in the drawing.If I save the image, close and reopen itthe drawing is ok.
My system is:
Mac Pro
Mac OS X 10.7.5
Intel Xeon quad-core "Nehalem" a 2,8 GHz
12 GB (3 x 4 GB)
HD Serial ATA da 1 TB a 3 Gb/s e 7200 giri/min
ATI Radeon HD 5870 1 GB
I would like to offer my customer the option of posting a pdf quiz on her website. Where the customer would fill in the answer fields, along w/ name, phone, etc.
Am I able to create it in X5?
One set is light, and the other is "dark," so to speak. Just wondering what filters and what not are used. I am aware that a lot of it comes from the actual lighting itself while the photo is being taken. I am just wondering what is being used and how this is done.
The "light" photos some "pin-up" technique, I am guessing. (Moti Malul Photography):
motimalul6.jpg (231.97K)
Number of downloads: 10
The "dark" photos. I am guessing a lot of dodge and burn, but to what extent?
the marquee select with the rectangular selection is often very limitated. Sometimes I wish to select multiple objects with a "free form", for example drawing the selection area with a polyline tool. Is this possible? I did not find a way to do it with the tool in CorelDraw (X5). Neither did I find solutions in the internet.
There's one tool, that does something very similar: the shap tool with ALT key can be used to select nodes by drawing a free line around the node. This is what I mean, but for objects not node.