how to create a check box for parameters in forms in inventor 2013, i have modelling a door which contains to many types of locks and where they are placed so i need to create check boxes to pick multiple items so i need to know how to insert them.
View 8 RepliesFrom iLogic i got a lot of information. And i want to configure or display this in a form.
But without having to make parameters for everything.
Example:
Display the stocknumber of an ipart/iassembly.
Configure the parameters from a part in the main assembly.
I have an ipart that uses a simple form to control its length. This part is used in an iassembly whic has other forms to control constraints.
I would like to be able drive the ipart form from inside the assembly.
I have an assembly with parameters named the same as LOD's.
The parameters are set to equal the mass of the corresponding LOD's using ilogic.
If the LOD does not exist, I want to set the mass of the corresponding parameter to a value of zero.
I don't know how to check for the existence of the LOD and I'm not sure I can have three commands in the ELSE section.
Below is an example of what I need using a Parameter and LOD called EXTERNALS as an example.
If EXTERNALS LOD does not exist
THEN Parameter("EXTERNALS")=0
ELSE
'activate the EXTERNALS LOD
ThisDoc.Document.ComponentDefinition.RepresentationsManager.LevelofDetailRepresentations("EXTERNALS").Activate
[code]...
in iParts factory I would like to create part ## by setting common name and adding to it different values drawn from part parameters.
Please refer to attached image – common name in that example would be “DRILL” and description of the diameter and length automatically taken from parameters in columns “DRILL_D” & “INSERT_L”.
I would like to offer my customer the option of posting a pdf quiz on her website. Where the customer would fill in the answer fields, along w/ name, phone, etc.
Am I able to create it in X5?
How to create artwork that uses the styles of traditional art forms such as oil, watercolor, acrylic painting? Or even Crayon, pastel, charcoal, sketch drawings? As in recreating the how the brush strokes in sketching or oil painting or like crayons the texture. Mostly the recreating the overall styles of those traditional mediums?
View 11 Replies View RelatedWhat is the best way to make art forms with inventor?
View 9 Replies View Relatedhow to delete iLogic forms from Inventor 2013 parts/assembly using VB.net 2010?
I am able to delete all the rule using "Activated_iLogic.DeleteAllRules(PartDoc)" but "Activated_iLogic.DeleteAllForms(PartDoc)" or "Activated_iLogic.DeleteForm(PartDoc, FormName)" does not give me the result I was expecting and Google is not showing any result related to this.
I am just playing with iLogic forms and I have set a slider to move a part in 15 degree steps from 90 to 180 degrees, all is fine but the slider is on the left for 90 degrees and on the right for 180 degrees, I would like it to be able to be set so that 180 is on the left of the slider and 90 is on the right of the slider. is this possible?
View 3 Replies View RelatedI'm trying to build a simple ilogic form to fill out iproperty infomation for parts we generate. Our company only uses a few of fields that are available. The problem is that the Physical tab is not available in the form editor. I would like to add this field to my form to be able to select the material for the part. The style/standard editor in our part template file holds all materials we use. Summary, Project, Status, and Custom are all available, why isn't Physical?
View 9 Replies View RelatedI have a small problem with iLogic forms picture folder. Is there a way of seting the image by the selected tab ?
I want to update the image by the tab selection.
I have tried "if" or "select case" and neither one worked. as I am saying Stair_Properties = True it only makes the tab active. It doesnt indicate if it is selected, here is the code :
If Stair_Properties = True ThenImage = "Image 01"End IfIf Railing_Properties = True ThenImage = "Image 02"End IfIf Riser_Properties = True ThenImage = "Image 03"End If'Select Case Image'Case Stair_Properties'Image = "Image 01"'Case Railing_Properties'Image = "Image 02"'Case Riser_Properties'Image = "Image 03"'End Select
I would like to know if it is possible to make a form with multiple forms, depending on the selection a could build a rectangle, or a cilynder or a cone.
View 3 Replies View RelatedWhat is it for and how do I use it? Will it allow me to switch between different pictures for display on my iLogic form?
If so? How do I set which picture to display?
I had some success transferring geometries, generated with an advanced math software, to Inventor using IGES files containing Manifold Solid B-Rep Object Entities (Type 186) (see the specification IGES5-3_forDownload-1.pdf). Now I would like to include several Type 186 entities into a single IGES file and form the geometrical unit of these (and them), for which the IGES Boolean Tree Entity (Type 180) seems to exist. I'll do some trial-and-error testing, but it would be very useful to have a (reliable) list of all IGES entities the Inventor IGES import function does or does not support (like these: Transcendata, MoldflowInsight). Unfortunately I could not find such a list anywhere.
Another question: Are the IGES import/export functions of Inventor written by Autodesk (and/)or are third-party libraries used? If the latter, which ones?
I set up a Form in Inventor using parameters that are driven from Excel. I cannot edit the form.
View 6 Replies View RelatedAleays that I change the selection "MODO" ("D e i" instead of "Z1 e Z2" and vice-versa), I need run one more time for the rule sense the changing.. when the right is run one time.
iLogicForm.Show("FLAMA-GEARS", FormMode.Modal) If MODO = "D e i" Then iLogicForm.Show("D e i", FormMode.Modal) End If If MODO = "Z1 e Z2" Then iLogicForm.Show("Z1 e Z2", FormMode.Modal) End If
I would like to instantly launch an External Rule just by clicking on a button in the Global Forms area of the iLogic browser. Is this possible, and if so, how would I do it?
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
I am currently working in AutoCAD 2012 and have been creating dynamic blocks for a while now.What i am running into is this: When i create a Look up Parameter and add all of the necessary parameters (flip1, flip2, visibility and distance) to the block, it acts as it should. However, when i select the LH or the RH look up state the check mark defaults back to the "Default" state. If the "LH (Reversed)" or the "RH (Reversed)" state is selected, the check mark will stay on the selected state.
In AutoCAD 2009 i know that if you set the "Custom" look up state (found at the bottom of the look up window) to the first listed state, it will correct this issue. But in 2012 this is not the case.
I am trying to make a dynamic block below. I need the "end" of the line to be "moveable". I've tried the point parameter and the stretch action with no luck.
View 9 Replies View RelatedI want to create boxes where I can tick or cross (x) them but I'm not sure how to do it. I've looked through some threads but they appear to be for old versions of AI. For instance, some suggest the use of glyphs but it doesn't appear as shown in their screenshots.
I would like the box to be 'empty' and then I can either tick is in a green tick, or cross it in a red cross. I'm not aware of the keyboard inputs for ticks. (Like those found for the copyright logo)
[URL]
AI CS6
Is it possible to create subassembly from C3D Stock Subassemblies.dll programmatically using .NET? I need call procedure (Basic Lane for example), set all input parameters and create subassembly in drawing.
View 7 Replies View RelatedI have in the past needed to create filters that had both a positive AND a negative in the parameters.
One of my most common examples: Layers in a specific XRef with names that do not contain specific string.
I tried XRefName|*[~anno]* and it gave me ALL the layers from the XRef (including the ones with anno in the name).
I also tried XRefName|*~anno* and it didn't list ANY layers.
It it possible to do this? I've read throught the docs on using wildcards in the filter properties but don't see anything.
If any easy method to check the model in the inventor.now i doing each feature i have to check the fully constrained or not.if any easy method.
View 8 Replies View RelatedIm thinking of adding some kind of info that tells me if the active ipt or iam have an idw, by the same name. It should be available/visible when opening, or editing parts and assys.
View 3 Replies View RelatedI am converting 1100 files from RAW to JPEG in ACR and after about every 10 or 15 images I randomly get the script alert 'I am unable to create a file in this folder. Please check your access rights to this location'
Under the properties on that folder 'full permission' is checked for everything. All of the images that have been processed are saved into that folder as well.
Is it possible to find the type of a browsernode?
In my code I can only see that the type is a browsernode.
Should I use Browsernodedefinition to get the type?
Maybe it's not possible, so I can stop trying.
Dim oPane As BrowserPane = oDoc.BrowserPanes.ActivePane Dim tNode As BrowserNode = oPane.TopNode Dim oNode As BrowserNode Dim oNodes As BrowserNodesEnumerator = tNode.BrowserNodes For Each oNode In oNodes MessageBox.Show(oNode.Type) Next
Get control of your sheet metal files at [URL]
is there any way to spell check your text in an .IDW file?
Also... How can I arrange my Dimensions so that our Dimension Standards are the standard Style?
I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
We use iproperties to describe our parts and have a 40 character limit. Is there any way ilogic could be used to check and possibly warn if an iprop field exceeds 40 characters?
Inventor 2010 Pro SP4, Vault Collaboration 2010
HP Z820 Xeon E5-2643 0 @ 3.3Ghz 16.0GB RAM
Nvidia Quadro 5000
I need to create a form with several options, corresponding to parts to load/unload. Only 1 checkbox can be activated at a time, so when I check a check box, the others have to be unchecked. In VB this should be radio buttons, is it possible to have the same issue in iLogic with checkboxes ?
View 3 Replies View Related