AutoCAD Inventor :: Spell Check In IDW Files
Apr 25, 2012is there any way to spell check your text in an .IDW file?
Also... How can I arrange my Dimensions so that our Dimension Standards are the standard Style?
is there any way to spell check your text in an .IDW file?
Also... How can I arrange my Dimensions so that our Dimension Standards are the standard Style?
I have some blocks with invisible attributes that I use to put information a wiring schedule. How to have those checked in a spell check? I can see that they are misspelled in the table but when I run a spell check it will not fix them.
View 3 Replies View RelatedIn AutoCAD 2011 and 2012 my spell check instantly recognizes a misspelled word as soon as you enter a space after the word as you type.
AutoCAD 2013 does not recognize the misspelling until I go back (still within the text editor) and click on the word. Only then will it show the red underline. This is using Dtext only. Mtext works fine.
For the bad spellers or missed keystrokes, the fast "on the fly" spell checking was great. How to get my AutoCAD 2013 to behave similarly?
when running spell check the tab for adding a word to the dictionary is not available.
View 9 Replies View RelatedThe spell check works, almost. when I type a word that spell check does not recognize, I get the red underline, but when I choose to add it to dictionary, no dice. if I ignore, close the editor and reopen, the red underline is there.
What to do, what to do?
When I use the spell checker in Photoshop CS5 to check a text layer (in English), all I ever get is a message saying "Spell check complete" -- never any evidence of any errors being detected. It would be nice to think I'm a perfect speller, but the reality is it does this even when I can clearly see there are mistakes (for example, I've tested it by inserting gibberish words into my text).
Where are the spelling dictionaries, etc. installed, and what files should I find there for English spelling?
Am I the only one annoyed with CD spell check?
When I add a word to the spell check dictionary or select ignore all the red underline stays and if I do misspell the word that I just added later, it will not suggest my addition as a possible correction...
Why do i get the message "The operation cannot complete because of an unknown error. [CANT]" when i try to spell check in Illustrator CS6?
View 1 Replies View RelatedFYI - When spell check hits a word that is on a path, it crashes the program. Happening consistently for more.
View 5 Replies View RelatedHow do I change language in spell check for CS4?
View 2 Replies View RelatedI get this error when I actually run the spell checker. How to set the dialect? It seems to run, it just gives the error every 2-3 words.
View 2 Replies View RelatedSpell check in my adobe softwares are not picking up misspelled word, how do I correct this problem?
View 5 Replies View RelatedI'm writing a manual using Corel Draw X5. The manual is 125 pages. When I spell check the whole document it freezes. I waited well over 20 minutes before concluding that something was wrong. Forcing Corel to close during the "not responding" state corrupts the document. When I try to reopen it, it hangs during the opening process.
I am fully updated on the software. Is this document too big for Corel Draw?
How to change the spell check in Illustrator CC to check spelling using UK English spelling permanently.
So everytime I start a new document or even open an existing document and go Edit- Check Spelling it will check the spelling as UK English not USA English?
I have read that spell checking IS available for Photoshop Elements, but is disabled if I don't have the proper dictionaries. True? If so, where do I get the necessary dictionaries and how do I enable the spell check function?
View 8 Replies View RelatedWhen I spellcheck a huge doc w/ lots of lorem ipsum text spellcheck takes forever.
If I use only one certain block of loremipsum text that's in the spellecheck dictionary it wouldn't stop at those words every time.
When I use the spell checker in Photoshop CS5 to check a text layer, it always tells me there are no errors, even when I know there are, so it's a useless exercise. Where is the spellling dictionary installed, and how do I make sure it's working properly?
View 2 Replies View RelatedWe are currently using Inventor 2010 Professional Suite. Most of the users here are working with AutoCAD Mechanical. For the most part, it does the job. The person that previously used Inventor has moved on to bigger and better opportunities. Recently a new person was hired to utilize the Inventor software for initial designs. The original software was loaded on a new machine and everything seemed to work fine. Inventor was able to checkout files from the vault and were able to be manipulated accordingly. The issues began when the individual started to check the files back into the vault. It would appear everything works fine but the files never appear in the vault. Even if we create a new directory and attempt to check them in, the new directory is created in the vault but the files will not check-in.
If we use AutoCAD Mechanical, the files will check-out and check-in fine using the addin tools. It would appear all the rights are setup correctly. We even changed the new user to administrator and it still did not work. No one else has Inventor installed, but I am about to install it on another machine this Thursday when IT is in.
We have attempted to even drag the files into the vault just to see if that would work, even though we know this method is usually not the best. Still no success.
Running WINDOWS OS 7 PROF.
INTEL (R) CORE (TM)2 QUAD CPU Q9550 2.83 GHZ
8.00 GB RAM
Hard drive WDC WD10EARS-00MVWBO ATA DEVICE, 872 GB FREE OF 931 GB
I am trying to check-in an assembly, however there are missing .fins,.fsat,.ftes, fmsh and .fres files that cannot be found on my local machine, in the vault or on the other machines on our CAD network.
is there a way to remove references to these files so the assembly can be checked into the vault?
I want to create a label with a textbox (myabe) in which i will write by my keyboard a word.After that i want to press the "Enter" button and the programm do this simple thing...."SPELL" each letter of my word, an activate a specific command each time and in my case a specific RULE from iLogic.
For example, i wanna whrite my name.....NIKOS....and after pressing the ENTER button, firstly my programm read the letter "N" and trigger the Rule1....After a specific time (that i want to defined by myself, probably with a timer) the programm read the right next letter which is "I" and activate the next Rule2...Until the last letter where it will end.
I should note here that i already have the code that i can calling as Rule i wish.But i dont know how to use it for my job....
The code is the following...
Dim iLogicAuto As Object
Set iLogicAuto = GetiLogicAddin(ThisApplication)
If (iLogicAuto Is Nothing) Then Exit Sub
Dim doc As Document
Set doc = ThisApplication.ActiveDocument
[Code] .......
If any easy method to check the model in the inventor.now i doing each feature i have to check the fully constrained or not.if any easy method.
View 8 Replies View RelatedIm thinking of adding some kind of info that tells me if the active ipt or iam have an idw, by the same name. It should be available/visible when opening, or editing parts and assys.
View 3 Replies View RelatedIs it possible to find the type of a browsernode?
In my code I can only see that the type is a browsernode.
Should I use Browsernodedefinition to get the type?
Maybe it's not possible, so I can stop trying.
Dim oPane As BrowserPane = oDoc.BrowserPanes.ActivePane Dim tNode As BrowserNode = oPane.TopNode Dim oNode As BrowserNode Dim oNodes As BrowserNodesEnumerator = tNode.BrowserNodes For Each oNode In oNodes MessageBox.Show(oNode.Type) Next
Get control of your sheet metal files at [URL]
I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
We use iproperties to describe our parts and have a 40 character limit. Is there any way ilogic could be used to check and possibly warn if an iprop field exceeds 40 characters?
Inventor 2010 Pro SP4, Vault Collaboration 2010
HP Z820 Xeon E5-2643 0 @ 3.3Ghz 16.0GB RAM
Nvidia Quadro 5000
I need to create a form with several options, corresponding to parts to load/unload. Only 1 checkbox can be activated at a time, so when I check a check box, the others have to be unchecked. In VB this should be radio buttons, is it possible to have the same issue in iLogic with checkboxes ?
View 3 Replies View RelatedThe following code adds three user parameters to an .ipt:
Public Sub AddUserParams()
Dim oDoc As PartDocument
Set oDoc = ThisApplication.ActiveDocument
[Code].....
If I run this on a part that already contains any of these user parameter names I get an error. Is there a way to first check for each name and skip to the next if it already exists?
Also, how the heck do I set ExposedAsProperty for each of the parameters added?
I am running Inventor 2013 with vault 2013 on a brand new system. Everything was working great for a week or so, then inventor started to lock up during checkin. It would lock up with even a small simple part. I had the IT department try to remote in and change settings, with not luck. Then they "rebuilt" the system over again, this got things working for about another week and after that the problem started up again.
View 1 Replies View RelatedI am working with a fellow Inventor user who faces determining if a set of assemblies, on the file system, are complete and not missing any parts, references, etc. Aside from opening each one in Inventor direclty and manually verifying if the design is at least able to resolve al parts, is there any way to automate or semi-automate this check?
View 6 Replies View Relatedhow the check in/check out process works, and how that's related to the information in the project files (if it is)? I'm thiking of basic questions, such as how does Inventor know when a file is checked out, and where is that information recorded.
For reference, I'm using Inventor 2010 in a non-vault environment, with single-user projects, on a small corporate network. I've been using 3D CAD since late in the last millenium, but I've only been using Inventor for one year. My previous CAD experience was with Solid Designer, Solid Edge, and SolidWorks.
I'm writing a Javascript to run at startup. I want to check for the existence of XML files and process them, if they are available. How can I check for their existence?
View 6 Replies View Related