The spell check works, almost. when I type a word that spell check does not recognize, I get the red underline, but when I choose to add it to dictionary, no dice. if I ignore, close the editor and reopen, the red underline is there.
What to do, what to do?
when running spell check the tab for adding a word to the dictionary is not available.
View 9 Replies View RelatedIn AutoCAD 2011 and 2012 my spell check instantly recognizes a misspelled word as soon as you enter a space after the word as you type.
AutoCAD 2013 does not recognize the misspelling until I go back (still within the text editor) and click on the word. Only then will it show the red underline. This is using Dtext only. Mtext works fine.
For the bad spellers or missed keystrokes, the fast "on the fly" spell checking was great. How to get my AutoCAD 2013 to behave similarly?
I want to create a label with a textbox (myabe) in which i will write by my keyboard a word.After that i want to press the "Enter" button and the programm do this simple thing...."SPELL" each letter of my word, an activate a specific command each time and in my case a specific RULE from iLogic.
For example, i wanna whrite my name.....NIKOS....and after pressing the ENTER button, firstly my programm read the letter "N" and trigger the Rule1....After a specific time (that i want to defined by myself, probably with a timer) the programm read the right next letter which is "I" and activate the next Rule2...Until the last letter where it will end.
I should note here that i already have the code that i can calling as Rule i wish.But i dont know how to use it for my job....
The code is the following...
Dim iLogicAuto As Object
Set iLogicAuto = GetiLogicAddin(ThisApplication)
If (iLogicAuto Is Nothing) Then Exit Sub
Dim doc As Document
Set doc = ThisApplication.ActiveDocument
[Code] .......
is there any way to spell check your text in an .IDW file?
Also... How can I arrange my Dimensions so that our Dimension Standards are the standard Style?
I have some blocks with invisible attributes that I use to put information a wiring schedule. How to have those checked in a spell check? I can see that they are misspelled in the table but when I run a spell check it will not fix them.
View 3 Replies View RelatedWhen I use the spell checker in Photoshop CS5 to check a text layer (in English), all I ever get is a message saying "Spell check complete" -- never any evidence of any errors being detected. It would be nice to think I'm a perfect speller, but the reality is it does this even when I can clearly see there are mistakes (for example, I've tested it by inserting gibberish words into my text).
Where are the spelling dictionaries, etc. installed, and what files should I find there for English spelling?
Am I the only one annoyed with CD spell check?
When I add a word to the spell check dictionary or select ignore all the red underline stays and if I do misspell the word that I just added later, it will not suggest my addition as a possible correction...
Why do i get the message "The operation cannot complete because of an unknown error. [CANT]" when i try to spell check in Illustrator CS6?
View 1 Replies View RelatedFYI - When spell check hits a word that is on a path, it crashes the program. Happening consistently for more.
View 5 Replies View RelatedHow do I change language in spell check for CS4?
View 2 Replies View RelatedI get this error when I actually run the spell checker. How to set the dialect? It seems to run, it just gives the error every 2-3 words.
View 2 Replies View RelatedSpell check in my adobe softwares are not picking up misspelled word, how do I correct this problem?
View 5 Replies View RelatedI'm writing a manual using Corel Draw X5. The manual is 125 pages. When I spell check the whole document it freezes. I waited well over 20 minutes before concluding that something was wrong. Forcing Corel to close during the "not responding" state corrupts the document. When I try to reopen it, it hangs during the opening process.
I am fully updated on the software. Is this document too big for Corel Draw?
How to change the spell check in Illustrator CC to check spelling using UK English spelling permanently.
So everytime I start a new document or even open an existing document and go Edit- Check Spelling it will check the spelling as UK English not USA English?
I have read that spell checking IS available for Photoshop Elements, but is disabled if I don't have the proper dictionaries. True? If so, where do I get the necessary dictionaries and how do I enable the spell check function?
View 8 Replies View RelatedWhen I spellcheck a huge doc w/ lots of lorem ipsum text spellcheck takes forever.
If I use only one certain block of loremipsum text that's in the spellecheck dictionary it wouldn't stop at those words every time.
When I use the spell checker in Photoshop CS5 to check a text layer, it always tells me there are no errors, even when I know there are, so it's a useless exercise. Where is the spellling dictionary installed, and how do I make sure it's working properly?
View 2 Replies View Relatedhow would I go about to check if a textframe with specific content exists in a document and if it does then procede with a function?
if ("word" exists) { make a new layer}
I just need it to check if one instance of the word exist
is there any way to check the entity selected by NonInteractivePickPoint? iwant to get the ownerid if the item selected is a 3d or 2d vertex. How is it written in vb.net?
View 3 Replies View RelatedIs it possible to find the type of a browsernode?
In my code I can only see that the type is a browsernode.
Should I use Browsernodedefinition to get the type?
Maybe it's not possible, so I can stop trying.
Dim oPane As BrowserPane = oDoc.BrowserPanes.ActivePane Dim tNode As BrowserNode = oPane.TopNode Dim oNode As BrowserNode Dim oNodes As BrowserNodesEnumerator = tNode.BrowserNodes For Each oNode In oNodes MessageBox.Show(oNode.Type) Next
Get control of your sheet metal files at [URL]
Without opening the drawing...
How can I iterate through and check the object type of all objects in model space? And... then delete them if they are certain types... like lines, circles, polylines, text, mtext, etc?
I took some photos in raw (NEF) format and now they can't be read on my computer by any adobe program. It says they don't recognize the type of file. I have a ton of photos in raw format that I can't even put on my computer.
View 5 Replies View RelatedWhen I type in Photoshop CS6 Extended the period is going before the word instead of after for example "I went to the .farm" I did not have this problem before, just the last couple of weeks.
View 4 Replies View RelatedI scanned some images using Phtoshop CS2 and saved them in Photoshope as jpgs. But apparently photoshop interpretted the end of the file name that I typed as a file extension - so a file that was called Portrait-06.22.1999 - was saved as a "1999" file as opposed to a jpg file. I can view these images in Windows Photo Viewer or Windows Live Photo gallery but they won't open in Photoshop. How do I change the file type so photoshop will recognize them? I tried just to add a JPG extension to the name of the file but that did not work. Also those photos that had this problem but were listed under "open recent" - I was able to get back in and save again as jpg and now they are fine.
View 11 Replies View RelatedHow can I type a word on an Image in Ps and change the background of the text box ?
View 1 Replies View RelatedWhen I try to open files - ANY files - I get an error message that AI doesn't recognize the file type. I tried importing files and received the same message. I then went back and attempted to open files that I had created with AI. NO FILES will open. I tried re-installing the program, still no dice.
View 16 Replies View RelatedWhy my Lightroom (4.3) won't recognize the file type of my Canon 5D Mark iii ? I am also a Mac user.
View 11 Replies View RelatedI am running Inventor 2013 with vault 2013 on a brand new system. Everything was working great for a week or so, then inventor started to lock up during checkin. It would lock up with even a small simple part. I had the IT department try to remote in and change settings, with not luck. Then they "rebuilt" the system over again, this got things working for about another week and after that the problem started up again.
View 1 Replies View RelatedCan a DIMSTYLE with annotative box checked be used in Layout or Paper Space? If so, are dimension at risk of losing their associative to part being dimension or be subject to change their Scale Factor when moving model or a different user (machine) opens the file?
View 2 Replies View RelatedWe use Acad map 3d 2012 & civil 3d 2012. We also use Arcgis10.2 and have not seen this problem until one of our contractors (using map 3d 2013) sent us his drawings. When we bring in the map 2013 drawing Arcgis does not recognize the projection assigned to the drawing and our data ends up thousands of kilometres off in the distance. Am I missing something...it always works fine for 2012 drawings.
View 2 Replies View Related