AutoCAD Inventor :: ILogic - Check Only One Checkbox?

Jul 29, 2013

I need to create a form with several options, corresponding to parts to load/unload. Only 1 checkbox can be activated at a time, so when I check a check box, the others have to be unchecked. In VB this should be radio buttons, is it possible to have the same issue in iLogic with checkboxes ?

View 3 Replies


ADVERTISEMENT

AutoCAD Inventor :: Ilogic Max Character Check?

Dec 4, 2012

We use iproperties to describe our parts and have a 40 character limit. Is there any way ilogic could be used to check and possibly warn if an iprop field exceeds 40 characters?

Inventor 2010 Pro SP4, Vault Collaboration 2010
HP Z820 Xeon E5-2643 0 @ 3.3Ghz 16.0GB RAM
Nvidia Quadro 5000

View 5 Replies View Related

AutoCAD Inventor :: ILogic - Check-in Drawing Into Vault

Jan 8, 2014

I'm wondering if it is possible to check-in drawing into vault using i-logic?

If you check-in a drawing into our vault, it automaticly exports a .dwf to a storage server. We also have a simple button for making .pdf of the drawing to sent to the customer.

What i want to ensure is that the .dwf file and the .pdf file are the same. So when i press "make a .pdf" the rule will save my document, make a .pdf and (if possible) check it into vault. So from that point the .pdf for the client and the .dwf on the server are the same.

Inventor 2013

View 2 Replies View Related

AutoCAD Inventor :: Check To See If LOD Exists Then Create Ilogic Rules Around It

Mar 27, 2013

I have an assembly with parameters named the same as LOD's.

The parameters are set to equal the mass of the corresponding LOD's using ilogic.

If the LOD does not exist, I want to set the mass of the corresponding parameter to a value of zero.

I don't know how to check for the existence of the LOD and I'm not sure I can have three commands in the ELSE section.

Below is an example of what I need using a Parameter and LOD called EXTERNALS as an example.

If  EXTERNALS LOD does not exist
THEN Parameter("EXTERNALS")=0
ELSE
'activate the EXTERNALS LOD
ThisDoc.Document.ComponentDefinition.RepresentationsManager.LevelofDetailRepresentations("EXTERNALS").Activate

[code]...

View 2 Replies View Related

AutoCAD Inventor :: Check Which Trigger Started ILogic Rule

Nov 15, 2013

I'm making some ilogic code for my new drawing templates and I'd like run part of the code only when the rule is trigger by the "after open document" trigger. Is there a way to check which trigger started an iLogic rule or would I be stuck making a second rule which is only triggered by the "after open document" trigger?

View 2 Replies View Related

AutoCAD Inventor :: How To Check Part Or Assembly Contain ILogic Form

Oct 6, 2011

I've done an Addin which contains a "Place iLogic Component" function. This funcion work properly and the iLogic form is opened at place component time. Now, i would like to be able to open the form after the insertion, for edition purpose. So, i'd like to open the iLogic form of an assembly component (occurence) with the context menu for example.

So, my question is : Is there a way to check if a part or an assembly contain an iLogic form and to open it through Inventor 2012 API ?

View 2 Replies View Related

AutoCAD Inventor :: ILogic Code To Check File Name Matches Part Present In Drawing

Feb 15, 2013

At my company we use part numbers as file names for everything. for example, part number 09090P00100000, will be saved as 09090P00100000.ipt and will have a drawing saved as 09090P00100000.idw.

Within the drawing template file, i want to set up an ilogic rule that will check that the part present in the drawing corresponds to the file name of the drawing. This rule will run after saving and will just display a warning if the file names do not correspond.

I just need some code that will get the file name of the part displayed in the drawing.  Note that we use iparts so the code must get the member file name and not the factory file name.

Dim oDrawingDoc As DrawingDocument
oDrawingDoc = ThisApplication.ActiveDocument  
Dim oSheet As Sheet   
oSheet = oDrawingDoc.ActiveSheet

[Code] ........

Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit

View 8 Replies View Related

AutoCAD Inventor :: Close ILogic Form With VBA Or ILogic Rule

Aug 19, 2013

how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?

View 5 Replies View Related

AutoCAD 2013 :: Select Initial View Checkbox

May 4, 2012

The Select Initial view checkbox in the standard file open dialogue has moved in 2013 from just above the File Name label to the file list window.  Aside from the fact that it looks totally out of place design wise I find it obscures the file list.  A way to revert to the previous behavior, or, even better, get rid of it all together because I never use it. 

View 9 Replies View Related

AutoCAD Inventor :: How To Check Model

Dec 2, 2012

If any easy method to check the model in the inventor.now i doing each feature i have to check the fully constrained or not.if any easy method.

View 8 Replies View Related

AutoCAD Inventor :: Check For Existing IDW

Oct 7, 2013

Im thinking of adding some kind of info that tells me if the active ipt or iam have an idw, by the same name. It should be available/visible when opening, or editing parts and assys.

View 3 Replies View Related

AutoCAD Inventor :: How To Check Type Of Browsernode

Oct 11, 2011

Is it possible to find the type of a browsernode? 

In my code I can only see that the type is a browsernode.

Should I use Browsernodedefinition to get the type?

Maybe it's not possible, so I can stop trying.
 
Dim oPane As BrowserPane = oDoc.BrowserPanes.ActivePane Dim tNode As BrowserNode = oPane.TopNode Dim oNode As BrowserNode Dim oNodes As BrowserNodesEnumerator = tNode.BrowserNodes For Each oNode In oNodes MessageBox.Show(oNode.Type) Next
 
Get control of your sheet metal files at [URL]

View 1 Replies View Related

AutoCAD Inventor :: Spell Check In IDW Files

Apr 25, 2012

is there any way to spell check your text in an .IDW file?

Also... How can I arrange my Dimensions so that our Dimension Standards are the standard Style?

View 6 Replies View Related

AutoCAD Inventor :: 2014 - DWG Will Not Check Into Vault

May 29, 2013

I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.

I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.

My PC Config:

Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014

View 9 Replies View Related

AutoCAD Inventor :: Check If UserParameter Already Exists

Nov 8, 2005

The following code adds three user parameters to an .ipt:

Public Sub AddUserParams()
Dim oDoc As PartDocument
Set oDoc = ThisApplication.ActiveDocument

[Code].....

If I run this on a part that already contains any of these user parameter names I get an error. Is there a way to first check for each name and skip to the next if it already exists?

Also, how the heck do I set ExposedAsProperty for each of the parameters added?

View 5 Replies View Related

AutoCAD Inventor :: 2013 Locks Up During Check In?

Sep 25, 2013

I am running Inventor 2013 with vault 2013 on a brand new system. Everything was working great for a week or so, then inventor started to lock up during checkin. It would lock up with even a small simple part. I had the IT department try to remote in and change settings, with not luck. Then they "rebuilt" the system over again, this got things working  for about another week and after that the problem started up again. 

View 1 Replies View Related

AutoCAD Inventor :: How To Check For Assembly Integrity

Feb 21, 2013

I am working with a fellow Inventor user who faces determining if a set of assemblies, on the file system, are complete and not missing any parts, references, etc. Aside from opening each one in Inventor direclty and manually verifying if the design is at least able to resolve al parts, is there any way to automate or semi-automate this check?

View 6 Replies View Related

AutoCAD Inventor :: Files Won't Check-in To Vault

Jan 3, 2012

We are currently using Inventor 2010 Professional Suite. Most of the users here are working with AutoCAD Mechanical. For the most part, it does the job. The person that previously used Inventor has moved on to bigger and better opportunities. Recently a new person was hired to utilize the Inventor software for initial designs. The original software was loaded on a new machine and everything seemed to work fine. Inventor was able to checkout files from the vault and were able to be manipulated accordingly. The issues began when the individual started to check the files back into the vault. It would appear everything works fine but the files never appear in the vault. Even if we create a new directory and attempt to check them in, the new directory is created in the vault but the files will not check-in.

If we use AutoCAD Mechanical, the files will check-out and check-in fine using the addin tools. It would appear all the rights are setup correctly. We even changed the new user to administrator and it still did not work. No one else has Inventor installed, but I am about to install it on another machine this Thursday when IT is in.

We have attempted to even drag the files into the vault just to see if that would work, even though we know this method is usually not the best. Still no success.

Running WINDOWS OS 7 PROF.
INTEL (R) CORE (TM)2 QUAD CPU Q9550 2.83 GHZ
8.00 GB RAM
Hard drive WDC WD10EARS-00MVWBO ATA DEVICE, 872 GB FREE OF 931 GB

View 1 Replies View Related

AutoCAD Inventor :: Understanding Check In / Out Paradigm?

Feb 20, 2012

how the check in/check out process works, and how that's related to the information in the project files (if it is)?  I'm thiking of basic questions, such as how does Inventor know when a file is checked out, and where is that information recorded.

For reference, I'm using Inventor 2010 in a non-vault environment, with single-user projects, on a small corporate network.  I've been using 3D CAD since late in the last millenium, but I've only been using Inventor for one year.  My previous CAD experience was with Solid Designer, Solid Edge, and SolidWorks.

View 9 Replies View Related

AutoCAD Inventor :: Check Box To Activate Dates In Form?

Dec 5, 2011

I'm trying to setup a custom form that matches my company's title block information.  My desired end result is to eliminate the need to open the iproperties (some users find it confusing/inconvient).  I have a seperate tab for the check/status information listed in the "status" tab of the iproperties.  In the iproperties, these are activated and deactivated with a check box.  When I add these properties to my form, I have the ability to open a calendar but I have no way of knowing if the date is activate or not.

I saw in another post, that a ticket was opened to added the material selection to the options in forms.  Could this functionality be added as well?

View 1 Replies View Related

AutoCAD Inventor :: How To Exclude Drawing Sheet From DWF When Check-in

Aug 31, 2013

I am using Inventor 2012 64 bit with Win 7.

We have a lot of drawing that has some extra sheet for ref. and Inventor let me exclude count and print from those extra sheet. This work fine but when we check-in the drawing to vault it update or publish all sheet to dwf. This is very compass for us because we full the dwf file from vault to release and the sheet count is different than the print out.

Is there a way to EXCLUDE those sheet when check-in or update dwf?

View 1 Replies View Related

AutoCAD Inventor :: How To Check Assembly Was Fully Constrain

Jun 14, 2012

In Auto desk inventor how to check assy was fully constrain and whick comand to use to check ? 

View 4 Replies View Related

AutoCAD Inventor :: Vault Add-In Not Allowing Open (Check Out All)

Oct 24, 2012

Following a recent Inventor crash (another topic entirely), I re-started Inventor and logged in to Vault Workgroups, all with no problems. From the Ribbon Vault Tab I chose Open, browsed to and selected one of my I-Assemblies. I clicked the down arrow next to the Open button at the bottom right corner of the dialog box, and was surprised that the Open (Check Out All) option was grayed out. This has never been the case before now. I have checked with quite a few other Assembliles and I-Parts, all of which are currently in sync with the Vault, and none of them allow me the option of Open (Check Out All).

This has persisted for 2 days now, meaning I have shut my workstation down completely and re-started each morning. Is there some system setting or variable that needs adjustment? Is there some disconnect between the Inventor Vault add-in and Vault Workgroups itself that results in this option being disabled?

Autodesk Product Design Suite Premium 2013
Inventor 2013 64-bit Edition
Win7-64, 8-core Intel® Xeon® CPU W3550 @ 3.07GHz
NVIDIA GeForce GTX 560 Ti
454 GB HD, Intel® ICH10R SATA AHCI Controller
SpaceNavigator, 3.14.2 / 6.14.0 / 3.18

View 2 Replies View Related

AutoCAD Inventor :: Open (Check Out All) Option Is Grayed Out?

Jul 3, 2012

The Open (Check Out All) option is grayed-out when opening an Inventor file from Vault. How do I activate this?

View 2 Replies View Related

AutoCAD Inventor :: Vault Check Out Window Behind Add-in Dialog

Sep 2, 2011

I have a Visual Basic.NET add-in that displays a dialog in Inventor. The code in this dialog opens some parts in the background. This has always worked fine, but now I'm working with Vault and when the files are not checked out Inventor displays a small window and asks the question if you want to check out the file. The problem is that this small windows stays behind my add-in dialog. Is it possible to show the check out windows on top of my add-in dialog? I tried form.show and form.showdialog, but this doesn't seem to make any difference.

View 2 Replies View Related

AutoCAD Inventor :: Threaded Hole Interference Check

Jan 13, 2009

When I run an interference check on an assembly, any of the threaded holes that have fasteners in them shows interference. I guess that the problem arises from the document setting "Tapped Hole Diameter" is set to minor.

To solve the problem with the interference, I could either change the modeled size of the hole or change the modeled bolt diameter. Either one causes problems in other places.

View 9 Replies View Related

AutoCAD Inventor :: Prompting To Check Out Multiple Times

Jul 11, 2013

A drawing that is in Vault, it asks if you want to check it out, and if you say no (like if you just need to print it), it opens it then asks you again if you want to check it out? Did it not get the hint the first time?

View 1 Replies View Related

AutoCAD Inventor :: How To Check The Direction Of An Extrude Feature

Mar 4, 2013

How to check the direction of an existing extrude feature 

kPositiveExtentDirection 
kNegativeExtentDirection 
kSymmetricExtentDirection

View 2 Replies View Related

AutoCAD Inventor :: Check If IProperty Exists In Component?

Apr 9, 2013

I am simply trying to traverse an assembly, check each component for existance (or value of) an iProperty, and if so add that components name to a list.  Here is what I have, but it doesnt work.
 
'Define the open document
Dim oDoc As Document = ThisDoc.Document
Dim oRefDoc As Document

[Code].....

View 1 Replies View Related

AutoCAD Inventor :: Vault 2013 Check In Error

Oct 8, 2013

I am getting the attached error when trying to check in an assembly and idw.  The Vault is pointed to the C drive, so I'm not sure why it isn't finding the files within the C.

View 3 Replies View Related

AutoCAD Inventor :: Vault Check-In Breaks Preview

Oct 26, 2013

I use something like the code shown below as part of an Inventor add-in that automatically checks in modified parts and drawings.  Everything works perfectly except for one problem.  After a file is checked in using this process, the Vault Preview is unavailable.  The message in the Preview window says "Unable to view the file selected.  Click the 'Open' button to view with an external viewer."
 
Dim byteArray() As Byte = IO.File.ReadAllBytes(fullFileName)Dim fileBom As Autodesk.Connectivity.WebServices.BOM = serviceManager.DocumentService.GetBOMByFileId(vaultFile.Id)serviceManager.DocumentService.CheckinFile(vaultFile.MasterId, Environment.UserName, False, IO.File.GetLastWriteTime(fullFileName), associations, fileBom, False, vaultFile.Name, vaultFile.FileClass, false, byteArray) 

What needs to change so that the Vault Previews will be maintained?  This is with Inventor/Vault 2012, but a solution using a more recent version would also be great.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved