AutoCAD Inventor :: 2014 - DWG Will Not Check Into Vault
May 29, 2013
I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
View 9 Replies
ADVERTISEMENT
Jan 3, 2012
We are currently using Inventor 2010 Professional Suite. Most of the users here are working with AutoCAD Mechanical. For the most part, it does the job. The person that previously used Inventor has moved on to bigger and better opportunities. Recently a new person was hired to utilize the Inventor software for initial designs. The original software was loaded on a new machine and everything seemed to work fine. Inventor was able to checkout files from the vault and were able to be manipulated accordingly. The issues began when the individual started to check the files back into the vault. It would appear everything works fine but the files never appear in the vault. Even if we create a new directory and attempt to check them in, the new directory is created in the vault but the files will not check-in.
If we use AutoCAD Mechanical, the files will check-out and check-in fine using the addin tools. It would appear all the rights are setup correctly. We even changed the new user to administrator and it still did not work. No one else has Inventor installed, but I am about to install it on another machine this Thursday when IT is in.
We have attempted to even drag the files into the vault just to see if that would work, even though we know this method is usually not the best. Still no success.
Running WINDOWS OS 7 PROF.
INTEL (R) CORE (TM)2 QUAD CPU Q9550 2.83 GHZ
8.00 GB RAM
Hard drive WDC WD10EARS-00MVWBO ATA DEVICE, 872 GB FREE OF 931 GB
View 1 Replies
View Related
Oct 24, 2012
Following a recent Inventor crash (another topic entirely), I re-started Inventor and logged in to Vault Workgroups, all with no problems. From the Ribbon Vault Tab I chose Open, browsed to and selected one of my I-Assemblies. I clicked the down arrow next to the Open button at the bottom right corner of the dialog box, and was surprised that the Open (Check Out All) option was grayed out. This has never been the case before now. I have checked with quite a few other Assembliles and I-Parts, all of which are currently in sync with the Vault, and none of them allow me the option of Open (Check Out All).
This has persisted for 2 days now, meaning I have shut my workstation down completely and re-started each morning. Is there some system setting or variable that needs adjustment? Is there some disconnect between the Inventor Vault add-in and Vault Workgroups itself that results in this option being disabled?
Autodesk Product Design Suite Premium 2013
Inventor 2013 64-bit Edition
Win7-64, 8-core Intel® Xeon® CPU W3550 @ 3.07GHz
NVIDIA GeForce GTX 560 Ti
454 GB HD, Intel® ICH10R SATA AHCI Controller
SpaceNavigator, 3.14.2 / 6.14.0 / 3.18
View 2 Replies
View Related
Jan 8, 2014
I'm wondering if it is possible to check-in drawing into vault using i-logic?
If you check-in a drawing into our vault, it automaticly exports a .dwf to a storage server. We also have a simple button for making .pdf of the drawing to sent to the customer.
What i want to ensure is that the .dwf file and the .pdf file are the same. So when i press "make a .pdf" the rule will save my document, make a .pdf and (if possible) check it into vault. So from that point the .pdf for the client and the .dwf on the server are the same.
Inventor 2013
View 2 Replies
View Related
Sep 2, 2011
I have a Visual Basic.NET add-in that displays a dialog in Inventor. The code in this dialog opens some parts in the background. This has always worked fine, but now I'm working with Vault and when the files are not checked out Inventor displays a small window and asks the question if you want to check out the file. The problem is that this small windows stays behind my add-in dialog. Is it possible to show the check out windows on top of my add-in dialog? I tried form.show and form.showdialog, but this doesn't seem to make any difference.
View 2 Replies
View Related
Oct 8, 2013
I am getting the attached error when trying to check in an assembly and idw. The Vault is pointed to the C drive, so I'm not sure why it isn't finding the files within the C.
View 3 Replies
View Related
Oct 26, 2013
I use something like the code shown below as part of an Inventor add-in that automatically checks in modified parts and drawings. Everything works perfectly except for one problem. After a file is checked in using this process, the Vault Preview is unavailable. The message in the Preview window says "Unable to view the file selected. Click the 'Open' button to view with an external viewer."
Dim byteArray() As Byte = IO.File.ReadAllBytes(fullFileName)Dim fileBom As Autodesk.Connectivity.WebServices.BOM = serviceManager.DocumentService.GetBOMByFileId(vaultFile.Id)serviceManager.DocumentService.CheckinFile(vaultFile.MasterId, Environment.UserName, False, IO.File.GetLastWriteTime(fullFileName), associations, fileBom, False, vaultFile.Name, vaultFile.FileClass, false, byteArray)
What needs to change so that the Vault Previews will be maintained? This is with Inventor/Vault 2012, but a solution using a more recent version would also be great.
View 1 Replies
View Related
Aug 2, 2013
Im working on a program that checks out syncronizes some data with our erp system and then checkes in the files again to vault. all works fine but in vault all links to other files are gone? when i checkin the files from inventor manuel then the links are ok in vault. therefore i wonder if it is possible to run the vault checkin dialog "hidden" and just pass in some predifined options and checkin to vault.
View 8 Replies
View Related
Jun 4, 2013
Installed Product desgin suite 2014. I can create a new inventor dwg file and place a base view of an assembly into it. I then attempt to check it in and it causes Inventor to not respond and eventually crash. When I reopen the dwg from my working folder and attempt to check it in again it gives me an error saying that the file already exists.
View 1 Replies
View Related
Sep 27, 2013
Since yesterday The vault ribbon is missing in Inventor 2014 and also add ins are grayed out(not loaded).
win 7 x64 system?
View 4 Replies
View Related
Nov 2, 2009
Today I happen to be checking in and out many drawings. All display the cogo points message at the lower left corner, and all are taking 4 minutes to check in. UNREASONABLE! Especially when I have five minutes of work to do in each drawing.
View 9 Replies
View Related
Nov 18, 2011
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies
View Related
Mar 11, 2010
When I get latest versions of files from Vault Explorer and then open them in Inventor, the vault status of the files in the Inventor browser shows a triangle with an exclaimation mark inside of it. When I move my mouse over the status icon, it says "vault not open". There is no response when I try to log into the Vault within Inventor.
I upgraded from 2009 to 2010 Inventor and Vault two weeks ago. Everything worked fine until today. Vault Explorer seems to be working fine. The ADMS console seems to also be working fine. I can do all the routine tasks in both programs. The problem is only in Inventor.
View 4 Replies
View Related
Dec 13, 2011
I am using the autodesk suit 2011. The problem I am having is when I copied a block from autocad using the copy command, then used the paste command in an inventor .dwg and it inserted as an autoCAD block. When I check the finished drawing into vault the autocad block does not show up and will not print.
View 2 Replies
View Related
Aug 17, 2012
We have a user that has been experiencing problems when checking files into vault. The problem occurs when he copies a design (the drawing and part file) in vault then checks out the files to make changes, saves it and checks it back in, Inventor doesn't check in the changes. The preview window (i.e.. dwf that's generated on check in) is correct however the thumbnail is wrong and when you open the latest version none of the changes have been made.
This is taking up a lot of time because he has to make the changes twice and also has to be constantly looking back in vault to files he has just checked in to make sure they are correct.
View 7 Replies
View Related
Oct 26, 2011
We are a mid sized company the builds our parts from raw materials. Steel Coils, Steel tubing, Steel plate, etc.
We are have been migrating from MDT to Inventor over the last few years. We are now trying to implement Vault and integrate that data into our ERP system. We would like to model a part and assembly and check that into Vault then pass the BOM into our ERP system.
It all sounds good up until I looked at how our part files were structured. There is not BOM in an ipt that I have found phantom or referential. Here is my problem
It takes 1 lb of a .0625" thich steel sheet that is 6.5" wide. We stamp our product in a 200 ton press producing a finish componet.Problem 1- Part1.ipt (model of my stamping) does not have a lower level it is a component in Inventor there is no BOM that I have found.Problem 2 - Part2.iam uses part1ipt but we punch a hole in it and push material outward to create a lip so we can lap weld the next part.When I try to extrude this feature I can only cut the part I cannot add material or deform it in any way.Problem 3 - We also manufacture bent tubes. We consume 1.5 ft of part C to make part D. I cannot insert 1.5ft of a part that is 20ft long as we buy it. then we bend it. I cannot insert a 1.5ft part into an assembly and then bend it.
Major problem - even though I can change the dwg file or idw file to add a parts list Vault does not put this information in the Item master BOM.
View 9 Replies
View Related
Nov 8, 2011
I have opened Vault for the first time and I don't know how to access it, it wants a username/password/server/database. I am one of two people in the company how use inventor etc so there is no existing server/database within my company so I assume i have to set one up?
View 3 Replies
View Related
Sep 3, 2008
We have a product line that relies heavily on iAssemblies. The main assembly and several layers of subassemblies are all iAssemblies. All the children that needed to be generated so far were added to the vault.
If I activate a different member in the main assembly factory, Inventor wants to update some of the various children. For some reason, vault won't prompt me to check out the children. I get a variety of errors, unless I manually check out the children.
There are at least 20 iAssemblies involved at different levels of this thing, not to mention all the iParts thrown in as well.
View 6 Replies
View Related
Apr 11, 2013
I'm using the free Vault that doesn't have a batch print option so I've been writing some code that does the trick.
The code lists open drawings, assemblies and parts, and depending onwhich is selected, displays a list of all the drawings associated with the file and it's sub-components.
Everything is good except that when the list of drawings is populated I am only able to search through the working folder for drawings. This means that if the drawing has been modified by another, or the drawing has not been opened on the local computer, it will not print (or print the old version).
Is there a way to pull the latest files from vault into the working folder automatically? Currently the only way this is possible is by selecting "Get/Checkout" in vault and downloading the files.
View 8 Replies
View Related
Apr 9, 2012
A customer has a problem with the add-in of Vault in Inventor. Log In and Log Out options are lost as shown in the picture. The machine already formatted and installed applications again but the problem continues.
View 9 Replies
View Related
Aug 29, 2012
I am making a copy design of a big file, two things I need to change manually which takes lots of time:
I need to change the status of files from Reuse to Copy, also I need to change the paths to the right ones as the paths that kick in by default when I change the main directory on the top are not right.
Is there a quick way of changing status of all the files to Copy, kinda shift and highlight or the way Vault renames files with Replace option? With big assemblies connected with 10 drawing files doing it all by hand.
View 9 Replies
View Related
Dec 10, 2013
I started using inventor when he started the job. I have been using Inventor for about 3 years now. My question is that I have always practiced good file management at every level of a project from single parts to large assemblies; however at this new job the file management is horrible, in the last 3 years the company has been through 13 different drafters, thus each drafter was saving files in different location and names making finding parts and assemblies a nightmare.
The problem I am having is that the lead designer is insisting that we implement vault, and that it will solve our problems, However I feel that we needed to develop a universal file and naming convention first, get our file hierarchy in order before we try and implement vault. There will only be 2 of us accessing the cad files and I don't think that vault would even be a good fit for our work flow.
View 9 Replies
View Related
Nov 23, 2011
We are trying to migrate our 2010 and earlier inventor files that exists in our vault 2012 professional fully replicated environment to The latest inventor release.
We are trying to utilize the task scheduler. but when attempting to use the "Migrate Files from Vault" and select the option to add folders. we receive several pop ups, one after another. The header states "folder" and in the message box is simply "1000" then an "ok" button.
After clicking ok a half dozen times the dialog finally comes up to select the folder, but the entire vault is not available in the selection window. I have tried this on several machines and 2 different databases. Same result.
View 8 Replies
View Related
Dec 25, 2013
I'd like to get the Vault file Id from an inventor document on the local workspace in order to be sure that it has been checked in (I want to be sure that all the files on the local disk have been checked in).
View 2 Replies
View Related
Oct 2, 2013
I search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.
Inventor 2014?
View 1 Replies
View Related
Oct 19, 2012
I recently installed Vault pro 2013. I was running Inventor 2012 at the time.. My vault add-in stopped loading. I installed Inventor 2013 and the vault add-in still won't load. I've gone to the Add-in manager 2013 and set it to loaded. I hit the "OK" button and nothing. Open the manager up again and it says "unloaded". Something is going on that is not allowing my vault add-in to load.
View 1 Replies
View Related
Mar 7, 2012
the "place item from vault" icon is grayed out and not available for selection. how do a place a stock part located in the vault, into an assembly i am currently working on?
View 2 Replies
View Related
Jan 23, 2013
I have one computer that can't connect to the Vault Server. It use to work fine and I am not sure what happened. I have gone to the extreme of uninstalling and re-installing and still nothing. I am in the same project as when it was working. I have checked the Application Options Content Center and made sure that the Access Options is set to Autodesk Vault Server.
When I click on Vault Server, everything is grayed out except "Log In" and "Connection Options". If I click on either of them the dialog box goes away and nothing happens. No error dialogs nothing. If I go to the project amd click on the Configure Content Center Libraries button it just disappears and nothing happens. Not sure what else to do.
View 1 Replies
View Related
May 24, 2012
I actually have two separate but related issues.
The place component button on the ribbon seems to have inconsistent behavior. When using the drop down to place components from content center or Vault, sometimes the ribbon button will be "sticky" and remember my selection for the next component and sometimes it will revert to the default place from local. Is there any way to configure Inventor to treat Place from Vault as the default behavior? Probably about 75% of the time I am placing components from Vault; having to crank through extra clicks to get to Vault is a waste of time.
View 3 Replies
View Related
May 20, 2011
It seems to me that there is a major disconnect between using the Vault and using Frame Generator. When creating a frame using frame generator all the parts are automatically named by frame generator. It gives you a name such ANSI W8x13 00000001 for an I-beam for instance. As you create more components (I-beams in this case) the number on the end of the file name increases so you have 0000002, 00000003 etc. After I'm finished with the assembly I will check it into the vault.
The issue comes up when I go to create a new assembly a few days later using the same I-beam. The naming convention for the I-beam is exactly the same for the new assembly file. It will start over and give me a new ANSI W8x13 00000001 file. Now when I go to check it into the vault I get the "cannot check in due to vaulting restrictions" error because the two files have been named the exact same thing. It seems crazy that Inventor would be set up this way considering how vault works. The only thing I have found is that you can click the browse button and rename the file. This is a serious headache though because I have to come up with a unique name (or pre-fix) for EVERY part of EVERY frame that I generate. And lets just say it's not hard for me to create 100+ new parts a day using frame generator.
View 9 Replies
View Related
Jan 18, 2012
We are currently running Inventor 2010 Professional (64-bit) on our computers with Vault 2010 on a remote server, but are ready to upgrade to Inventor 2012 Professional. Will we be able to continue to use Vault 2010, or will our Vault (ADMS?) need to go to 2012 also?
A side question, what are the strategies to update the files in the Vault to 2012? As needed? Setup an automated task?
View 1 Replies
View Related
