AutoCAD Inventor :: Vault - Copy Design
Aug 29, 2012
I am making a copy design of a big file, two things I need to change manually which takes lots of time:
I need to change the status of files from Reuse to Copy, also I need to change the paths to the right ones as the paths that kick in by default when I change the main directory on the top are not right.
Is there a quick way of changing status of all the files to Copy, kinda shift and highlight or the way Vault renames files with Replace option? With big assemblies connected with 10 drawing files doing it all by hand.
View 9 Replies
ADVERTISEMENT
Nov 23, 2011
When I try to copy design from Vault, but I cannot do it, here the message.
View 4 Replies
View Related
May 3, 2013
You create a part, or assembly, check it into vault, then do a copy design in Vault. When you open the copied assembly, any sheet metal parts have reverted back to default thickness, making it so flat patterns don't work right until you manually change it. Also half of my custom parameters (sheet metal length and width) go missing and I have to type them in manually. Why does Inventor 2013 drop such information?
View 5 Replies
View Related
Mar 5, 2013
I have a folder that contains subfolders, then more subfolders. All these folders contain Inventor files. There are few different models there with drawings and related files...
I need to make an exact copy of the folder at different location in Vault. To use Copy Design tool, I would need to do it few times, as there are few totally separate files in the folders.
Now, is there a way of taking main folder with its all contants and just copying/renaming it to other location? It would save me lot of time.
View 2 Replies
View Related
Jul 5, 2012
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
View 2 Replies
View Related
Nov 5, 2013
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
View 3 Replies
View Related
Nov 10, 2011
I have two questions - one simple and one more complex, in my opinion. As of now I have a user form where one can enter a variety of values, hit a button, and it writes these values to a designated excel sheet. My first question is how would I be able to allow the user to change one value and have the rest of the entered values change based on this one value. For example if someone were to change the ID # of a part then the height and width would change corresponding to that ID number and would be displayed in the user form. I'm new to VBA so my thought process is kind of trash at the moment...
My second question is whether or not it is possible to write a vba program/macro that automatically utilizes iLogic Design Copy and makes copies of an assembly and continues to copy said assembly while adding a constantly increasing suffix ie -01, -02, -03... for a given number of times.
View 2 Replies
View Related
Feb 15, 2012
i have an asm1 that i would like to copy as asm2. identical most of the part except for some parts that i have to replace and use other parts from asm3.
Which is the best method to use, copy design or save as?
View 3 Replies
View Related
Aug 26, 2011
I have an assembly as a template that was created by a previous employee. There are known variables that are controlled with an Excel spreadsheet.
What I am attempting to do is create a VB form that the user can input the known variables and then have the program open the template, perform the changes, and copy to the vault. Sounds easy enough. A few caveats:
If I store the template in the Vault (preferred), how do I perform a "Copy Design" with a VB6 program?If I store it on a hidden network drive, this prevents users from screwing it up, but then I have to open each indivual file and perform a "SaveAs". Also easy enough. But, since the previous employee linked each component of the assembly to the Excel file, I would need to perform a "Change Source" to the newly created Excel spreadsheet in each component. Not sure how that is done. I do have VB2010 Express, but just not as comfortable with it as VB6. (I know, get with the current .Net)
View 1 Replies
View Related
Dec 27, 2011
I have an existing frame design by Inventor but then i wish to copy out the existing design and modify it ! so i try with the copy function in design assistant but then i found that after i modified the frame size or profile in the copied frame design, the existing frame design changed as well! How to break the link between these two frame design on this case?
View 3 Replies
View Related
Jul 8, 2013
I can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
View 3 Replies
View Related
Aug 11, 2011
I'm finally wrapping up work on an iLogic Configurator project and have started to brainstorm the best workflow to get this "Smart Assembly" into the design group's hands. I had been anxiously awaiting the new "iLogic Design Copy" feature in IV2012, but just recently learned that users are unable to effectively rename any components with this command.
Is this really true? If we can add prefixes or suffixes, what's stopping us from changing the entire filename? We haven't upgraded to 2012 yet, but it seems like this may be a silly and unjustifiable restriction to a command that would otherwise save our designers hours of "file-management" (ie, manually renaming parts in Explorer, component replace in assy's, replace references in idw's, etc) each week.
Long story short, it seems that every workflow I've come across has had some sort of silly limitation that makes it undesireable for my application:
My top-level assembly contains all of the rules, and changes parameter values in the referenced skeletal parts. It also swaps standard parts for other standard parts as needed.I need access to rename ALL files (idw's, top-level assembly, subassemblies, and base components) while still maintaining/updating all internal hyperlinks between them.iLogic rules must be carried over to the new copied components (the existing "Copy Assembly" command strips the assembly of all rules). In light of the iLogic Design Copy's apparent shortcomings, any better workflow?
View 9 Replies
View Related
Jan 22, 2013
Can you open two dwgs and copy blocks from one design center to the other?
View 3 Replies
View Related
Oct 9, 2013
I wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies
View Related
Jul 8, 2012
I've tried dragging layers across drawings using the design center interface, but what I've noticed is that while the layer in question gets copied over, the layer is empty. The objects within the layer do not get copied over. How do I copy objects AND layers that I've selected across drawings using Autocad Design Center?
View 5 Replies
View Related
Nov 18, 2011
We are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies
View Related
Mar 11, 2010
When I get latest versions of files from Vault Explorer and then open them in Inventor, the vault status of the files in the Inventor browser shows a triangle with an exclaimation mark inside of it. When I move my mouse over the status icon, it says "vault not open". There is no response when I try to log into the Vault within Inventor.
I upgraded from 2009 to 2010 Inventor and Vault two weeks ago. Everything worked fine until today. Vault Explorer seems to be working fine. The ADMS console seems to also be working fine. I can do all the routine tasks in both programs. The problem is only in Inventor.
View 4 Replies
View Related
Apr 10, 2012
I just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies
View Related
Dec 13, 2011
I am using the autodesk suit 2011. The problem I am having is when I copied a block from autocad using the copy command, then used the paste command in an inventor .dwg and it inserted as an autoCAD block. When I check the finished drawing into vault the autocad block does not show up and will not print.
View 2 Replies
View Related
Aug 17, 2012
We have a user that has been experiencing problems when checking files into vault. The problem occurs when he copies a design (the drawing and part file) in vault then checks out the files to make changes, saves it and checks it back in, Inventor doesn't check in the changes. The preview window (i.e.. dwf that's generated on check in) is correct however the thumbnail is wrong and when you open the latest version none of the changes have been made.
This is taking up a lot of time because he has to make the changes twice and also has to be constantly looking back in vault to files he has just checked in to make sure they are correct.
View 7 Replies
View Related
Oct 26, 2011
We are a mid sized company the builds our parts from raw materials. Steel Coils, Steel tubing, Steel plate, etc.
We are have been migrating from MDT to Inventor over the last few years. We are now trying to implement Vault and integrate that data into our ERP system. We would like to model a part and assembly and check that into Vault then pass the BOM into our ERP system.
It all sounds good up until I looked at how our part files were structured. There is not BOM in an ipt that I have found phantom or referential. Here is my problem
It takes 1 lb of a .0625" thich steel sheet that is 6.5" wide. We stamp our product in a 200 ton press producing a finish componet.Problem 1- Part1.ipt (model of my stamping) does not have a lower level it is a component in Inventor there is no BOM that I have found.Problem 2 - Part2.iam uses part1ipt but we punch a hole in it and push material outward to create a lip so we can lap weld the next part.When I try to extrude this feature I can only cut the part I cannot add material or deform it in any way.Problem 3 - We also manufacture bent tubes. We consume 1.5 ft of part C to make part D. I cannot insert 1.5ft of a part that is 20ft long as we buy it. then we bend it. I cannot insert a 1.5ft part into an assembly and then bend it.
Major problem - even though I can change the dwg file or idw file to add a parts list Vault does not put this information in the Item master BOM.
View 9 Replies
View Related
Nov 8, 2011
I have opened Vault for the first time and I don't know how to access it, it wants a username/password/server/database. I am one of two people in the company how use inventor etc so there is no existing server/database within my company so I assume i have to set one up?
View 3 Replies
View Related
Sep 3, 2008
We have a product line that relies heavily on iAssemblies. The main assembly and several layers of subassemblies are all iAssemblies. All the children that needed to be generated so far were added to the vault.
If I activate a different member in the main assembly factory, Inventor wants to update some of the various children. For some reason, vault won't prompt me to check out the children. I get a variety of errors, unless I manually check out the children.
There are at least 20 iAssemblies involved at different levels of this thing, not to mention all the iParts thrown in as well.
View 6 Replies
View Related
Apr 11, 2013
I'm using the free Vault that doesn't have a batch print option so I've been writing some code that does the trick.
The code lists open drawings, assemblies and parts, and depending onwhich is selected, displays a list of all the drawings associated with the file and it's sub-components.
Everything is good except that when the list of drawings is populated I am only able to search through the working folder for drawings. This means that if the drawing has been modified by another, or the drawing has not been opened on the local computer, it will not print (or print the old version).
Is there a way to pull the latest files from vault into the working folder automatically? Currently the only way this is possible is by selecting "Get/Checkout" in vault and downloading the files.
View 8 Replies
View Related
Apr 9, 2012
A customer has a problem with the add-in of Vault in Inventor. Log In and Log Out options are lost as shown in the picture. The machine already formatted and installed applications again but the problem continues.
View 9 Replies
View Related
Dec 10, 2013
I started using inventor when he started the job. I have been using Inventor for about 3 years now. My question is that I have always practiced good file management at every level of a project from single parts to large assemblies; however at this new job the file management is horrible, in the last 3 years the company has been through 13 different drafters, thus each drafter was saving files in different location and names making finding parts and assemblies a nightmare.
The problem I am having is that the lead designer is insisting that we implement vault, and that it will solve our problems, However I feel that we needed to develop a universal file and naming convention first, get our file hierarchy in order before we try and implement vault. There will only be 2 of us accessing the cad files and I don't think that vault would even be a good fit for our work flow.
View 9 Replies
View Related
Nov 23, 2011
We are trying to migrate our 2010 and earlier inventor files that exists in our vault 2012 professional fully replicated environment to The latest inventor release.
We are trying to utilize the task scheduler. but when attempting to use the "Migrate Files from Vault" and select the option to add folders. we receive several pop ups, one after another. The header states "folder" and in the message box is simply "1000" then an "ok" button.
After clicking ok a half dozen times the dialog finally comes up to select the folder, but the entire vault is not available in the selection window. I have tried this on several machines and 2 different databases. Same result.
View 8 Replies
View Related
Dec 25, 2013
I'd like to get the Vault file Id from an inventor document on the local workspace in order to be sure that it has been checked in (I want to be sure that all the files on the local disk have been checked in).
View 2 Replies
View Related
Oct 2, 2013
I search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.
Inventor 2014?
View 1 Replies
View Related
Oct 19, 2012
I recently installed Vault pro 2013. I was running Inventor 2012 at the time.. My vault add-in stopped loading. I installed Inventor 2013 and the vault add-in still won't load. I've gone to the Add-in manager 2013 and set it to loaded. I hit the "OK" button and nothing. Open the manager up again and it says "unloaded". Something is going on that is not allowing my vault add-in to load.
View 1 Replies
View Related
May 29, 2013
I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
View 9 Replies
View Related
