You create a part, or assembly, check it into vault, then do a copy design in Vault. When you open the copied assembly, any sheet metal parts have reverted back to default thickness, making it so flat patterns don't work right until you manually change it. Also half of my custom parameters (sheet metal length and width) go missing and I have to type them in manually. Why does Inventor 2013 drop such information?
View 5 RepliesI am making a copy design of a big file, two things I need to change manually which takes lots of time:
I need to change the status of files from Reuse to Copy, also I need to change the paths to the right ones as the paths that kick in by default when I change the main directory on the top are not right.
Is there a quick way of changing status of all the files to Copy, kinda shift and highlight or the way Vault renames files with Replace option? With big assemblies connected with 10 drawing files doing it all by hand.
When I try to copy design from Vault, but I cannot do it, here the message.
View 4 Replies View RelatedI have a folder that contains subfolders, then more subfolders. All these folders contain Inventor files. There are few different models there with drawings and related files...
I need to make an exact copy of the folder at different location in Vault. To use Copy Design tool, I would need to do it few times, as there are few totally separate files in the folders.
Now, is there a way of taking main folder with its all contants and just copying/renaming it to other location? It would save me lot of time.
Often times when I mirror a sheet metal part in an assembly, several problems occur: The material thickness (in sheet metal defaults) gets reset to the default
Example: My parts are .1875". I mirror one part in the assembly (creating a new part), then when I attempt to create a flat pattern for that part, it doesn't do it right because the thickness in the "Sheet Metal Defaults" is set to .125 (my template default). The "Use Thickness from Rule" check box is NOT checked in my template, but it checks itself when I mirror a part.
The mates completely disappear meaning I have to reconstrain the part.
I have two custom iProperties in my sheet metal template: LENGTH and WIDTH (each set to <SHEET METAL LENGTH> etc.). It retains WIDTH but loses LENGTH, so I have to go manually create a new custom property to get my LENGTH back.
I am changing the PC on which i store my Vault. i have successfully installed vault server onto the new pc but cannot find a way to migrate the data from the vault on my old PC. I initially tried to restore vault from a backup but this was not successful. Can i just copy and drop the files into the same location on the new pc?
View 1 Replies View RelatedI am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
I have two questions - one simple and one more complex, in my opinion. As of now I have a user form where one can enter a variety of values, hit a button, and it writes these values to a designated excel sheet. My first question is how would I be able to allow the user to change one value and have the rest of the entered values change based on this one value. For example if someone were to change the ID # of a part then the height and width would change corresponding to that ID number and would be displayed in the user form. I'm new to VBA so my thought process is kind of trash at the moment...
My second question is whether or not it is possible to write a vba program/macro that automatically utilizes iLogic Design Copy and makes copies of an assembly and continues to copy said assembly while adding a constantly increasing suffix ie -01, -02, -03... for a given number of times.
i have an asm1 that i would like to copy as asm2. identical most of the part except for some parts that i have to replace and use other parts from asm3.
Which is the best method to use, copy design or save as?
I have an assembly as a template that was created by a previous employee. There are known variables that are controlled with an Excel spreadsheet.
What I am attempting to do is create a VB form that the user can input the known variables and then have the program open the template, perform the changes, and copy to the vault. Sounds easy enough. A few caveats:
If I store the template in the Vault (preferred), how do I perform a "Copy Design" with a VB6 program?If I store it on a hidden network drive, this prevents users from screwing it up, but then I have to open each indivual file and perform a "SaveAs". Also easy enough. But, since the previous employee linked each component of the assembly to the Excel file, I would need to perform a "Change Source" to the newly created Excel spreadsheet in each component. Not sure how that is done. I do have VB2010 Express, but just not as comfortable with it as VB6. (I know, get with the current .Net)
I have an existing frame design by Inventor but then i wish to copy out the existing design and modify it ! so i try with the copy function in design assistant but then i found that after i modified the frame size or profile in the copied frame design, the existing frame design changed as well! How to break the link between these two frame design on this case?
View 3 Replies View RelatedI can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
I'm finally wrapping up work on an iLogic Configurator project and have started to brainstorm the best workflow to get this "Smart Assembly" into the design group's hands. I had been anxiously awaiting the new "iLogic Design Copy" feature in IV2012, but just recently learned that users are unable to effectively rename any components with this command.
Is this really true? If we can add prefixes or suffixes, what's stopping us from changing the entire filename? We haven't upgraded to 2012 yet, but it seems like this may be a silly and unjustifiable restriction to a command that would otherwise save our designers hours of "file-management" (ie, manually renaming parts in Explorer, component replace in assy's, replace references in idw's, etc) each week.
Long story short, it seems that every workflow I've come across has had some sort of silly limitation that makes it undesireable for my application:
My top-level assembly contains all of the rules, and changes parameter values in the referenced skeletal parts. It also swaps standard parts for other standard parts as needed.I need access to rename ALL files (idw's, top-level assembly, subassemblies, and base components) while still maintaining/updating all internal hyperlinks between them.iLogic rules must be carried over to the new copied components (the existing "Copy Assembly" command strips the assembly of all rules). In light of the iLogic Design Copy's apparent shortcomings, any better workflow?
In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedI have a number of drawings that i need to change the revision numbers, insert the date, the reviewer, etc.... I have been doing this manually but it takes heaps of time. Is there an easier way to copy and paste multiline attributes from one block to the same block used in other drawings (each drawings has the same block and attribute titles). One problem is that i cant simply copy the entire block as the drawing number, reviewers, titles etc are different in each drawing.
View 1 Replies View RelatedI bought a Canon S100 specifically for its GPs and movie capability. On a recent vacation, I used the S100 and a Nikon D300. In cases where images were taken with both cameras in approximately the same place, I would like to copy the GPS information from the S100 CR2 files to the D300 NEF files.
View 7 Replies View Relatedway to copy the slices/slice information from one psd to another. In other words, to copy the slices from image1 to image2 - using imageready or photoshop. I've tried several ways but can't figure out how to do this.
View 2 Replies View RelatedCan you open two dwgs and copy blocks from one design center to the other?
View 3 Replies View RelatedI wanted to use the program to design a robot for our school vex competition. Vex has provided cad files for all the parts. So, how i can import the seperate parts into one design. I can only open each part individually but cant find a way to combine them so can assemble the robot in one design.
View 2 Replies View RelatedWe are having problems with text in Illustrator CS6.
1. When we copy / paste text within illustrator all color information is lost.
2. When we save documents in Illustrator CS6 then re-open text with color attributes changes to different random colors!!
For example: If we save an Illustrator document with a paragraph of text that is part red and part black when we re-open the same paragraph might be all gray, or orange or (you pick a color).
Mac OSX 10.8.2
I've tried dragging layers across drawings using the design center interface, but what I've noticed is that while the layer in question gets copied over, the layer is empty. The objects within the layer do not get copied over. How do I copy objects AND layers that I've selected across drawings using Autocad Design Center?
View 5 Replies View RelatedI have a single file with couple objects on different layers. When I copy/paste into other files, the objects seem to be grouped and layer information disappeared. Can I move around objects with layer setting as well?
View 4 Replies View RelatedWe are trying to get task scheduler to automatically download certain files from the Vault. Templates and Styles. The templates work great, but there is no way to specify any filetypes other than Inventor filetypes. Am I missing something? Is there a way to specify non-inventor filetypes?
View 2 Replies View RelatedWhen I get latest versions of files from Vault Explorer and then open them in Inventor, the vault status of the files in the Inventor browser shows a triangle with an exclaimation mark inside of it. When I move my mouse over the status icon, it says "vault not open". There is no response when I try to log into the Vault within Inventor.
I upgraded from 2009 to 2010 Inventor and Vault two weeks ago. Everything worked fine until today. Vault Explorer seems to be working fine. The ADMS console seems to also be working fine. I can do all the routine tasks in both programs. The problem is only in Inventor.
I am a AutoCad drafter for telecommunications and I have utility pole points (long/lats)
I can insert the poles via long/lat and all is great, my issue is I would like more information in those points.
For example, pole number, class, HOA, Make Ready. Currently I create a survey data store and import ASCII Points using PNE(comma delimited)
So with my Excel file (this is where I get my pole information from) I get a point/northing/easting to enter into the formatting section.
I would like to add more information to these individual points, like ploe number, class, HOA...
If I view the point table I see that there are a lot of other columns, can I use them or customize them? is there a quick tutorial on this issue?
I just made a copy of assembly in Design Assistant.I opened the copied assembly in Design Assistant to make some changes.Parts are accessible but I have only "Clear" option possible. URL....
View 2 Replies View RelatedI am using the autodesk suit 2011. The problem I am having is when I copied a block from autocad using the copy command, then used the paste command in an inventor .dwg and it inserted as an autoCAD block. When I check the finished drawing into vault the autocad block does not show up and will not print.
View 2 Replies View RelatedWe have a user that has been experiencing problems when checking files into vault. The problem occurs when he copies a design (the drawing and part file) in vault then checks out the files to make changes, saves it and checks it back in, Inventor doesn't check in the changes. The preview window (i.e.. dwf that's generated on check in) is correct however the thumbnail is wrong and when you open the latest version none of the changes have been made.
This is taking up a lot of time because he has to make the changes twice and also has to be constantly looking back in vault to files he has just checked in to make sure they are correct.
We are a mid sized company the builds our parts from raw materials. Steel Coils, Steel tubing, Steel plate, etc.
We are have been migrating from MDT to Inventor over the last few years. We are now trying to implement Vault and integrate that data into our ERP system. We would like to model a part and assembly and check that into Vault then pass the BOM into our ERP system.
It all sounds good up until I looked at how our part files were structured. There is not BOM in an ipt that I have found phantom or referential. Here is my problem
It takes 1 lb of a .0625" thich steel sheet that is 6.5" wide. We stamp our product in a 200 ton press producing a finish componet.Problem 1- Part1.ipt (model of my stamping) does not have a lower level it is a component in Inventor there is no BOM that I have found.Problem 2 - Part2.iam uses part1ipt but we punch a hole in it and push material outward to create a lip so we can lap weld the next part.When I try to extrude this feature I can only cut the part I cannot add material or deform it in any way.Problem 3 - We also manufacture bent tubes. We consume 1.5 ft of part C to make part D. I cannot insert 1.5ft of a part that is 20ft long as we buy it. then we bend it. I cannot insert a 1.5ft part into an assembly and then bend it.
Major problem - even though I can change the dwg file or idw file to add a parts list Vault does not put this information in the Item master BOM.
I have opened Vault for the first time and I don't know how to access it, it wants a username/password/server/database. I am one of two people in the company how use inventor etc so there is no existing server/database within my company so I assume i have to set one up?
View 3 Replies View Related