I have a single file with couple objects on different layers. When I copy/paste into other files, the objects seem to be grouped and layer information disappeared. Can I move around objects with layer setting as well?
View 4 RepliesIs there a setting that allows grouped objects from different layers to be ungrouped and they return to their original layers?
View 3 Replies View RelatedI have a state map that is made up individual vector files of each county in the state. They are grouped together. I want to make it seem as if though there is more space between each of the counties as if there they've all been separated just a little bit more than. Is there a way I can do this efficiently in Illustrator? I'm working in CS 6 on a mac.
View 7 Replies View RelatedIn the link below you will find a jpeg of a sew on patch, then a pdf of just the logo. I am wanting to learn how to create the outline look of the patch around the group of objects that form the logo. I have tried the appearance, outline trick but for thsi project it does not even come close. [URL]
View 8 Replies View RelatedHow can I select all objects in a layer and copy and paste the objects into a new document? We are having issues with the copy and paste method. Is this because it uses the operating systems clipboard?
View 10 Replies View RelatedHow do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need.
Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.
We are having problems with text in Illustrator CS6.
1. When we copy / paste text within illustrator all color information is lost.
2. When we save documents in Illustrator CS6 then re-open text with color attributes changes to different random colors!!
For example: If we save an Illustrator document with a paragraph of text that is part red and part black when we re-open the same paragraph might be all gray, or orange or (you pick a color).
Mac OSX 10.8.2
I have AutoCAD Map 3D 2013. How do I copy/move objects such as lines and arces between layers that are in the Task Pane window, not the regular layers? I can't find the Layer Manager.
View 6 Replies View RelatedHow do I fix this? I've gone through view settings so far, without success.
View 1 Replies View RelatedI am extremely new at Corel Draw X5. I am in the middle of a design; page 30cmx160cm (for printing purposes) however to make it easier my design is sitting 160cmx30cm
I have started the design consisting of 200+ objects. By grouping them i presumed that it would make one object and when I rotated them 90 degrees to fit the page they would rotate in the same they sat originally.
But when I rotate the group it rotates the individual objects on their individual axis not on a group axis.
Is there anyway getting around this without moving each individual object?
In cs6 if I have two objects in a group I just select one and move it. In CC it moves all of the objects in a group.
View 1 Replies View RelatedWhy are my edit commands (copy and cut) grayed out / unavailable? When trying to copy a selected layer or object, all my editing commands are grayed out and unavailable. Even if I convert something to a smart object, no joy. The only thing I seem to be able to select and copy/cut/paste is text in the text edit mode. makes no sense and is rendering PS unusable.
View 5 Replies View RelatedI've tried dragging layers across drawings using the design center interface, but what I've noticed is that while the layer in question gets copied over, the layer is empty. The objects within the layer do not get copied over. How do I copy objects AND layers that I've selected across drawings using Autocad Design Center?
View 5 Replies View RelatedI am currently working on a project which requires me to run a script several times, probably over 200 times. Ive been racking my brain serveral times over and cannot figure out how to have the selected layer be renamed by its color information. Ive also tried to maybe build a new layer command into the current action I am using, but i keep having a dialog box pop up which interrupts the rest of the action.
Also, is there a way to automate an action according to a swatch. Meaning if I select a swatch can i have it perform the action and then move on to the next swatch in the list, or until the swatch list has been completed.
Why can't I just highlight multiple objects and move or resize them together? This wasn't a problem in previous versions, but now when I select more than one clip (or grouped objects), the effect controls go away. I have a lower third (the title and 2 different cropped color mattes) that I want to be able to move and resize while maintaining their relationship, and I can't figure it out. I've been using Premiere for a long time, and this is a huge inconvenience. I also cannot highlight multiple clips, and adjust their length together. Sometimes it will work (rarely), but most of the time it will only adjust one at a time. It's a real nuissance when you have upwards of ten layers you need to adjust together.
View 5 Replies View RelatedI'm a developer, and a lot of times, marketing companies send me some material for their applications in .psd (Photoshop) files. My usage is basic: just open these files, get some layer and export to web images. For this purpose, I bought Photoshop Elements 10, but then I realized (after bought it) that it cannot open grouped layers (only merge all layers in group in a single layer). I'll not discuss about the lack of this basic feature, we already have a lot of noise around it.
My question is: is this limitation still present on PSE 11? Or now I can open grouped layers on psd files?
I need to find a way to add "perspective" to grouped objects that include a bitmap and other drawn objects. I can convert everything to a bitmap in needed. What I need this for is I engrave this grouped artwork onto drinking glasses and I have to adjust the artwork for the differences in the diameter of the glass. I need to be able to set the width of the top of the artwork with a numeric value and the bottom with a different numeric value.
An example of the problem with the engraving is that if I wanted to engrave a one inch square half way down the glass I would have to make the top of the square 1.1 inches wide and the bottom of the square 1.2 inches (the math is not right with this example) so a trapezoid turns into a square once engrave on the tapered glass.
The image below shows a sample of the artwork I need to engrave. The right side image is an exaggerated example of what the artwork would need to look like to work right once engraved. I could only adjust the black ring but not the text or image in the center. The third image is to show a trapezoid.
On both the main pages and especially on print page. this seemed to have happened when I updated to 4.3 Is there a solution?
View 5 Replies View RelatedI have recently ran into a few issues with Photoshop CS6. When working with Layer Groups and Blend Modes.
Here is what happens:
I am working with a document and have layers grouped into a folder. All is good when I merge that group any layers that I had with a blend mode change from that mode to Normal, thus messing up the merge. Another instance where I had this issue is if I had any hidden layers that were not displayed. If the layers were merged they would be changed from hidden to displayed. Again messing up the image and the merge. Not sure what do to here.
I have problem with publishing my work in PDF. I have vector background (in thin stripes like) and several polygonal bitmap objects on it but in the PDF-file everything under the bitmap objects is bitmap also... And the stripes (of my background) are very ugly and jagged - part vector, part bitmap...
Could I complete that work correctly in CDR or have to search some other resolution?
I am using ACAD 2005 and am trying to copy&paste several objects from a layer I created in one .dxf file to one of the 2 standard layers (0 or Defpoints) in a new blank .dxf file.
My problem though is that if I copy and paste all of the objects (or even one of them) and them move to the new file and paste, it pastes the objects, but also "imports" into the new file the original file's layer that these objects were on.
For clarity, the new file only has the 2 standard layers and then after copy/pasting an object, the file manager shows the 3rd layer from the original file.
Seem like when I cut and paste objects from one file to another, particularly objects with different annotative scale, my lexisting ayers would get corrupted. Standard layer names will be appended with "@_96" at the end (i.e. "symbols" to "symbols@_96"l . The 96 would represent the annotative scale factor in the current file. If I exit out and reopen the file, all layer names will return bsck to normal. However if I cont. to work on the file for a long time, the file will get corrupted. when restore, a lot of annotative symbols that where on different "@_96" layers will merge into on new "audit" layer. Sometimes the symbols show up with a different current annotative scale
View 2 Replies View RelatedWhy this certain copy of Photoshop CS5 is doing this. I'll be trying to fill a layer or a selection but whenever I fill it, it never fills anything below other objects in completely unrelated layers. Is there a setting I can turn off to make sure that this doesn't happen anymore?
View 6 Replies View RelatedIf you've ever created an image having multiple assorted layers, and want to apply a modification to the final image while keeping those original layers intact, here's the script to do that:
Select allfrom PSPApp import *
def ScriptProperties():
return {
'Author': u'Ken Arway',
'Copyright': u'2013',
'Description': u'Copies all visible layers to a newly created ra'
u'ster layer.',
[code]....
Just use your favourite text editor to copy that code into a text file, and save the file as "CopyVisibleMergedToNewLayer.pspscript" in your user scripts directory. Doesn't matter if it's the "Restricted" or "Trusted" directory.
As the name implies, all the visible layers will be copied and merged, so it's easy to first "hide" the layers you don't want merged before running the script.
Yes, it's just a series of recorded actions; but the key is its use of the "Select All" and "Paste Into Selection" actions -- that ensures that the resulting merged layer maintains the same positioning as the individual layers. In other words, if your original layers have a transparent background and opaque areas that are off-center, simply using Edit...Paste As New Layer will center those opaque areas in the canvas, which is not what you want....
I am using Adobe Photoshop CS6, latest version as of 05/25/12.I have 19 layers, each has a 1200x1200px texture. These are of course overlapped, so setting them all to visible will only show the top layer.
All layers are rasterized, and contain 1200x1200px:
1) I select all 19 layers using shift+click, all are highlighted (in the layer pane).
2) I select a region using the selection tool, in this case a rectangular region that is 172px high and 35px wide.
3) I right click the selection, and then select: layer via copy. (Note, Layer via cut is disabled for some reason)
4) *problem* It creates 19 new layers with the full image from the selected layers and not the selection which is what I wanted to place in the new layers.
5) *problem* when I right click the selection and select "Free Transform", the transform box surrounds the entire canvas and not the selection.
6) *problem* when I skew, it skews the entire image and not just the selection.
7) *problem* Previously, I have been able to select a layer from the layer pane, go to image menu, select adjustments, brightness/contrast, and adjust the brightness/contrast for just that layer. Now it wont let me.
8) *related problem* If I have 3 layers (background, 1, and 2) on a 1200x1200 canvas, with the image in layer 1 being 150px, and the image in layer 2 being 150x, each rasterized, and then stack the images on 1 and 2 over eachother, then select both layers, then select a region inside the stacked images, then select free transform, the free transform selection embodies all pixels inside the canvas (not the entire canvas this time) and performs the transform on these pixels and not the original selection.
If I do it making all the layers visible as well as selected, it behaves the same.What appears to be happening is Photoshop is ignoring the selection and for some reason is using a pixel region (or if pixels cover the entire canvas, the whole image) when performing actions intended for the selection.
What's strange is when I made these textures, I started out with 19 150x150 pictures, I set the canvas size to 1200x1200, selected all the layers in the layer pane, selected the 150x150 image in the middle, and was able to move all 19 textures to the top right corner, able to switch to transform on all 19 pictures, able to rotate 180 degrees all 19 pictures, was able to flip horizontal all 19 pictures, then able to copy all 19 pictures to new layers, move the 19 pictures all at the same time to the right 150 pixels, rinse and repeat, to eventually come out with 19 1200x1200 textures tiled from the 150px pictures. In other words, I did exactly what I am attempting to do with the 1200x1200 pictures with the 150x150 pixtures and it worked like a champ.
The end goal of course is to take a selection of all 19 of the 1200x1200 pictures, transform, then skew that image to make a collage of images applied to an added background. Performing this on all 19 textures and getting the same exact skew, etc would take days considering I need to do about 15 of different portions of the tile.
lisp program to delete all objects in a drawing based on Layer excluding one layer objects.
in AutoCAD.
Example : I may have 10 layers in a drawings like 1 to 10. I need to delete all objects on 2 to 10 layers.
I have about 25 layers and within my layers are sublayers and groups etc . I wanted to paste them to a new document but when I do this everything is pasted all on separate layers. Is there a way so it pastes as is with the current layer configuration?? I dont want to have to regroup and organise everything all over again.
View 2 Replies View RelatedI have a question, quite a tricky one. Is there any way how can I copy and paste position and size of two objects?
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Something like copy + paste in place with a different logics. I hope You understand what I want.
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
When i copy an artboard, sometimes the objects on both the original and the duplicate artboard have slightly moved. See sreenshots below what i mean (you have to look closely).
The right artboard was copied to the left by alt-dragging the artboard. This happens to me a lot, but not all the time, i can't really predict when it happens... At first i thought it came by an accidental mouse click or something, but the strange thing is that after the copy the objects slightly moved on both artboards.
How can I get rid of the "copy" suffix after duplicating layers, in a non manual way naturaly?
View 4 Replies View Related