Premiere Pro :: Move And Resize Multiple Or Grouped Objects
Feb 17, 2014
Why can't I just highlight multiple objects and move or resize them together? This wasn't a problem in previous versions, but now when I select more than one clip (or grouped objects), the effect controls go away. I have a lower third (the title and 2 different cropped color mattes) that I want to be able to move and resize while maintaining their relationship, and I can't figure it out. I've been using Premiere for a long time, and this is a huge inconvenience. I also cannot highlight multiple clips, and adjust their length together. Sometimes it will work (rarely), but most of the time it will only adjust one at a time. It's a real nuissance when you have upwards of ten layers you need to adjust together.
View 5 Replies
ADVERTISEMENT
Jun 24, 2011
I have some viewports in paper space and when I resize the view port, the objects inside move in a strange way. I don't know if a variable got reset or something but this is weird. Normally I can resize a viewport and the objects stay in the same location. But now they seem to be moving relative to the edge of the viewport.
View 9 Replies
View Related
Feb 17, 2014
is it possible to move multiple scene markers at once ? Shift selecting and moving doesn't work.
View 3 Replies
View Related
Jan 12, 2009
expansion of the 3D toolset within PS CS4. It is *not* a 3D app, which is fine, but it does make texturing imported 3D objects considerably easier. It essentially simplifies the ZApplink workflow using ZBrush while maintaining your layers [rather than flattening to export back to ZBrush]
Now for my question...
I have imported 3 separate OBJ files as 3D layers. Is there any way to move all 3 objects on the canvas together? As it is, I can only move them independently which throws them out of registration with each other.
I have tried selecting all of the layers at once [shift-click] but the manipulation tools get nulled out. Same thing happens when I group the layers together. I am also not seeing any way to link the layers like you can with a pair of 2D layers.
[also... in order to get all three objects imported with the same scale and registration, I exported a pair of planes above and below each asset to create a bounding box.]
View 2 Replies
View Related
Dec 11, 2010
I am extremely new at Corel Draw X5. I am in the middle of a design; page 30cmx160cm (for printing purposes) however to make it easier my design is sitting 160cmx30cm
I have started the design consisting of 200+ objects. By grouping them i presumed that it would make one object and when I rotated them 90 degrees to fit the page they would rotate in the same they sat originally.
But when I rotate the group it rotates the individual objects on their individual axis not on a group axis.
Is there anyway getting around this without moving each individual object?
View 14 Replies
View Related
May 5, 2011
I´d like to know how to move/displace multiple objects (in this case bricks) like it is done in this animation (at approx. 0:15 sec) [URL].I tried to reconstruct the effect using bigger bricks and tangent constraints, which worked kinda ok but I had to constrain every single brick manually which was rather time consuming and definitely not the approach they must have had used. Is there a way to achieve similar effect (pref. without scripting)?
View 4 Replies
View Related
Jul 8, 2011
I have several pillars that I want to scale down to the same size, but I don't want to have to scale them individually or reposition them once I'm done. Is there any way to scale them all without making them move along the axis being scaled? (I should have made them instances of each other. My only problem there is that I couldn't reposition one pillar without moving the others. for future reference, is there a way to temporarily break the instance relationship so on can be edited?)
View 2 Replies
View Related
Oct 17, 2012
I have tried using the hot grips selection by holding shift, but some of the grips are overlapping and I can only select the top most grip. It is also a slow process because I must click each individual grip that I want to move as a whole. Is there a way of selecting multiple grips at once including grips that are beneath others?
View 1 Replies
View Related
Jul 19, 2013
In cs6 if I have two objects in a group I just select one and move it. In CC it moves all of the objects in a group.
View 1 Replies
View Related
Dec 16, 2013
I have a state map that is made up individual vector files of each county in the state. They are grouped together. I want to make it seem as if though there is more space between each of the counties as if there they've all been separated just a little bit more than. Is there a way I can do this efficiently in Illustrator? I'm working in CS 6 on a mac.
View 7 Replies
View Related
Jul 20, 2012
Is there a setting that allows grouped objects from different layers to be ungrouped and they return to their original layers?
View 3 Replies
View Related
May 22, 2013
In the link below you will find a jpeg of a sew on patch, then a pdf of just the logo. I am wanting to learn how to create the outline look of the patch around the group of objects that form the logo. I have tried the appearance, outline trick but for thsi project it does not even come close. [URL]
View 8 Replies
View Related
Apr 20, 2012
I need to find a way to add "perspective" to grouped objects that include a bitmap and other drawn objects. I can convert everything to a bitmap in needed. What I need this for is I engrave this grouped artwork onto drinking glasses and I have to adjust the artwork for the differences in the diameter of the glass. I need to be able to set the width of the top of the artwork with a numeric value and the bottom with a different numeric value.
An example of the problem with the engraving is that if I wanted to engrave a one inch square half way down the glass I would have to make the top of the square 1.1 inches wide and the bottom of the square 1.2 inches (the math is not right with this example) so a trapezoid turns into a square once engrave on the tapered glass.
The image below shows a sample of the artwork I need to engrave. The right side image is an exaggerated example of what the artwork would need to look like to work right once engraved. I could only adjust the black ring but not the text or image in the center. The third image is to show a trapezoid.
View 14 Replies
View Related
Jun 19, 2012
I have problem with publishing my work in PDF. I have vector background (in thin stripes like) and several polygonal bitmap objects on it but in the PDF-file everything under the bitmap objects is bitmap also... And the stripes (of my background) are very ugly and jagged - part vector, part bitmap...
Could I complete that work correctly in CDR or have to search some other resolution?
View 6 Replies
View Related
Oct 17, 2012
I have a single file with couple objects on different layers. When I copy/paste into other files, the objects seem to be grouped and layer information disappeared. Can I move around objects with layer setting as well?
View 4 Replies
View Related
Feb 5, 2013
CorelDraw_ExtendedLines.JPG
I have a time consuming problem that I was hoping a work-around or solution could be found for.
Some background: I use CorelDraw sort of as a CAD file creation software. The tool I use traces out straight, horizontal and vertical lines. At times, there are areas that need to be excluded being processed over, so my design has holes and gaps in it. The tricky part is, the tool I use needs time to accelerate up to full speed before I want it to start it's process. This requires that I add the same length to every single line in the layer (different layers need different added lengths). The problem that I run into, is that if I select multiple groups of lines that are not the same length and try to extend them, CorelDraw sees them as one group and extends the largest lines the right distance, but shorter lines get a different percentage of the distance, and gaps get shifted. I put in pictures of what I am talking about (a before, a good, and a bad).
can I select all the lines in a layer and tell CorelDraw to add X length to all of them, while keeping their center positions the same? It would save me a good deal of time.
View 10 Replies
View Related
Jan 8, 2012
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies
View Related
Jun 18, 2013
I know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
View 5 Replies
View Related
Jul 3, 2013
I have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
View 4 Replies
View Related
Dec 9, 2012
So a friend created a model using zbrush and exported several different *.OBJ files. I imported those to maya and added shaders. They all fit correctly together when imported.
some of those obj files required me to do a mesh->combine. so now it appears that not every item has the same reference point so that when I move or scale the entire item, some of the objects move seperately. I think it is only the ones I had to combine.
I tried freeze transformations, but when doing that, some of the objects lost their scale settings and still didnt move together as one unit.
View 2 Replies
View Related
May 30, 2013
I am having issues moving and resizing a image once it has been "placed" onto the document. It seems to be locked and even when I agree to place the image, I can still not move or resize it. This happens on all file types and CS6.
View 1 Replies
View Related
May 3, 2013
After loading JPEG into CS6 I select move tool. I use to just grab bounding box and pull outwards to resize and now when I pull outwards it basically zooms inside frame. How do I fix this?
View 1 Replies
View Related
Mar 16, 2011
When I place an object on the stage, I can move or resize is uzing the handles. However when I enter the coordinates or dimensions manualy nothing hapens.
I already tried to reset the workspace (F8 during startup).
View 5 Replies
View Related
May 8, 2012
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM
View 3 Replies
View Related
Jan 31, 2011
I usually use Photoshop and Fireworks, but have gotten sick of paying through the nose. I just installed Paint.net and notice that this program appears to be a great alternative to the above mentioned, but seems to be lacking a few tools. Once I get past the basics, I'll really start enjoying this program.
If I draw a square on a new layer, how do I select it to resize it or move it. I have tried to use the 'Move Selection' tool, but it keeps moving the entire layer and doesn't select the square.
View 3 Replies
View Related
Jan 29, 2013
I have some fotos that are apparently too small for the 1920 x 1080 format of my film.
What do I need to master about the relationship between three items (canvas size, image size, and document size) so that I can smoothly resize a bunch of images in Photoshop for export into Premiere Pro in that 1920 x 1080 format?
I will be constraining my proportions... if the images are too big, I will do a Ken Burns "zoom out" effect in the film.
View 9 Replies
View Related
Sep 18, 2013
A red box appears when i go to move a line. When the red box comes up on the line, the command box says 'Specify strech point or undo to cance'l. How do i put everything back to normak because i cant move any lines or resize them how i used to??!!
View 1 Replies
View Related
Oct 1, 2012
Currently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
View 5 Replies
View Related
Aug 21, 2012
During text creation, I can resize the text by changing font size, use move it around..Later on if I want to modify the text (resize, move to another location)...I don't know how..
View 2 Replies
View Related
Mar 2, 2014
The window with elements running in partially off the screen and the title bar is not visible. I have tried a number of things but I can not move or resize so that the complete window is visible. I am run elements 12 on a mac air
View 1 Replies
View Related
May 27, 2011
I have a user that can't move or resize his xref dialog box. He is using dual monitors and has no problem with any other dialog box. I've tried changing settings for docking/hide.
View 2 Replies
View Related
