I have some viewports in paper space and when I resize the view port, the objects inside move in a strange way. I don't know if a variable got reset or something but this is weird. Normally I can resize a viewport and the objects stay in the same location. But now they seem to be moving relative to the edge of the viewport.
View 9 RepliesWhy can't I just highlight multiple objects and move or resize them together? This wasn't a problem in previous versions, but now when I select more than one clip (or grouped objects), the effect controls go away. I have a lower third (the title and 2 different cropped color mattes) that I want to be able to move and resize while maintaining their relationship, and I can't figure it out. I've been using Premiere for a long time, and this is a huge inconvenience. I also cannot highlight multiple clips, and adjust their length together. Sometimes it will work (rarely), but most of the time it will only adjust one at a time. It's a real nuissance when you have upwards of ten layers you need to adjust together.
View 5 Replies View Relatedi have a drawing that i turned off the border of the viewport and i need to move the viewport problem is i cant select the viewport.. ive got all the layers turned on and can select inside for model space and outside for PS but cant select port itself..i even tryed select all and nothing
View 3 Replies View RelatedSo a friend created a model using zbrush and exported several different *.OBJ files. I imported those to maya and added shaders. They all fit correctly together when imported.
some of those obj files required me to do a mesh->combine. so now it appears that not every item has the same reference point so that when I move or scale the entire item, some of the objects move seperately. I think it is only the ones I had to combine.
I tried freeze transformations, but when doing that, some of the objects lost their scale settings and still didnt move together as one unit.
A red box appears when i go to move a line. When the red box comes up on the line, the command box says 'Specify strech point or undo to cance'l. How do i put everything back to normak because i cant move any lines or resize them how i used to??!!
View 1 Replies View RelatedCurrently using civils 3D. MY command line/toolbar has for some unknown reason shrunk to 2 inches in length.
When I try to resize it, there is no way to reposition it, resize it, or alter it in any way.
I have a user that can't move or resize his xref dialog box. He is using dual monitors and has no problem with any other dialog box. I've tried changing settings for docking/hide.
View 2 Replies View RelatedSomething that's been driving me around the bend lately. I have a drawing, with a viewport which I cannot select. I have unfrozen all layers, ticked the 'Selection Cycling' box, but no lines show. It's just there, a viewport, but with no viewport polyline. No way of deleting, or clipping, or doing anything with it.
View 5 Replies View RelatedThe company I now work for does everything in 3D with vanilla AutoCAN'T, 2012-2014. There are only a few 2D objects in any file. The problem I'm running into is when dimensioning the 3D geometry in paperspace, the dimensions will not always stay anchored to the points that I've snapped to. If I have to go into the block editor the dimensions will fly all over the place when I exit it.
VIEWBASE really useful to alleviate this problem, but not everyone is on the same version and we're saving back to a 2010 format which creates proxy objects when opened on another machine. I'm not sure if I have the freedom to start using it.
First I click in my viewport and select a few objects (lines/blocks etc) then whenever I type Pan or hold down my center mouse button to Pan. The Command line says the Viewport is viewlocked switching to paper space.
Now by switching to paper space everything I selected has now unselected. This basically leaves me the option to select what I see on the screen at one time and can't pan along and select anything else which is unbelievably frustrating on large drawings.
I am having issues moving and resizing a image once it has been "placed" onto the document. It seems to be locked and even when I agree to place the image, I can still not move or resize it. This happens on all file types and CS6.
View 1 Replies View RelatedAfter loading JPEG into CS6 I select move tool. I use to just grab bounding box and pull outwards to resize and now when I pull outwards it basically zooms inside frame. How do I fix this?
View 1 Replies View RelatedWhen I place an object on the stage, I can move or resize is uzing the handles. However when I enter the coordinates or dimensions manualy nothing hapens.
I already tried to reset the workspace (F8 during startup).
Can you freeze text objects on the same layer in one viewport but have it still appear on the other viewport without having two separate layers.
View 3 Replies View RelatedHere's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM
I usually use Photoshop and Fireworks, but have gotten sick of paying through the nose. I just installed Paint.net and notice that this program appears to be a great alternative to the above mentioned, but seems to be lacking a few tools. Once I get past the basics, I'll really start enjoying this program.
If I draw a square on a new layer, how do I select it to resize it or move it. I have tried to use the 'Move Selection' tool, but it keeps moving the entire layer and doesn't select the square.
I believe there is a way to create a block of displayed objects that are shown within viewport. I know I have done this before with basic Autocad. The closest thing at the moment that I can think of is "SOLPROF" but that only works for 3D objects.
The way I remember the command working was you started off with the command, select the objects with the viewport/or maybe it was just the viewport, the command made an instantaneous block of the objects that were only within the display area.
During text creation, I can resize the text by changing font size, use move it around..Later on if I want to modify the text (resize, move to another location)...I don't know how..
View 2 Replies View RelatedThe window with elements running in partially off the screen and the title bar is not visible. I have tried a number of things but I can not move or resize so that the complete window is visible. I am run elements 12 on a mac air
View 1 Replies View RelatedHave a bit of an odd problem showing up with 3ds Max 2012 64 Bit. The viewport does not update when I select or move an object. The program registers that I did make some changes, and things like object parameters and bounding boxes will change, but the meshes will remain the way they are until I delete them and undo.
Forcing the program to redraw all views does not change anything, nor does turning on/off progressive display.
I am having an issue with the Trajectories I cant move or select the keys within the viewport.
I used to select the object> Selecting Trajectories within the motion panel > Selecting Sub-Object.
I have a program that creates a drawing. I want to move all of the objects (lines, blocks, arcs...) from one point to another. I was using the SendStringToExecute, but it doesn't seem to work. Here is the section of code I have:
Dim newCenterX As Double
newCenterX = (rightXCoord + ((leftXCoord - rightXCoord) / 2))
startpt = New Geometry.Point3d(newCenterX, 0, 0)
endpt = New Geometry.Point3d(0, 0, 0)
' Move the objects from newCenterX to 0
acDoc.SendStringToExecute("._move all startpt endpt ", True, False, False)
acDoc.SendStringToExecute("._zoom _all ", True, False, False)
This will select all of the objects in the drawing, but it just doesn't see the start point and end point. It just keeps prompting me to enter the start and end points manually. Is there a way to pass the variables to the command? Is there another way of moving the objects?
how to move all the objects in a drawing to one layer so I can delete the other layers.
View 9 Replies View RelatedI have a weird issue with basic use xref in AutoCad 2012. There are two files complementary, (an elevation , one is masonry, the other windows). One is refering to the other with x-ref for a complete view (in overlay). From time to time some objects from the xref file are brought into the master file. This seems to happen randomly, like not all objects from a layer are moves for instance. These are usually blocks that are taken from the xref file. And when I discover them in the master drawing they are exploded too. So I have to clean my drawing up from all that scrap. It happen like twice a week.
View 5 Replies View RelatedI'm looking for a way to select multiple objects (all identical) and resize them all at once without also changing their positions.
Said another way, I'd like to resize a group of identical objects but instead of there being a single center/anchor point in the middle of the bounding box, I'd like each object within the group to retain it's center/anchor point (so multiple anchor points) and resize based on those positions.
I have just downloaded 3dmax design 2012 and on creating a basic object (a box)it emerges in a slow shower of litle dots very like sparks. This may be vertices or a point cloud whatever. They then stay in view , when viewing the box from another angle then the surface seems to swirl with patterns. I dont have this problem on my previous 2009 version.
View 1 Replies View RelatedAll the object on the scene are invisible in 1 viewport, even if I switch the viewport to other cameras they are still not visible.
I have tried changing the shading styles, other things like clipping, xview. Even restarted 3ds max for that matter but no luck.
I'm working on this massive architecture scene and i'm trying to move some rather small braided steel cable in the scene when i go to move it the objects moves in rather big increments instead of small ones. I check to see if snaps was on and its not, on what i can do to can more precision over my placement of these cables.
Custom Core i7 at 3.99 GHz, 8 gb ram, Nvidia Quadro FX 3800
I have AutoCAD Map 3D 2013. How do I copy/move objects such as lines and arces between layers that are in the Task Pane window, not the regular layers? I can't find the Layer Manager.
View 6 Replies View RelatedWhen I resize an object (for example, I want to extend a horizontal line by 20%, using the % boxes in the property bar), the resizing action is executed from the center of the object itself (so, 10% to the left and 10% to the right in my example).
If that object is snapped to other objects, resizing from the center automatically unsnaps them and so snapping must be done again.
Is there a quick way (such as double clicking a node, or so) to resize an object not from its center, but from a side or a vertex of it?
If i want to move 2D objekts with basepoint to the coordinate 0,0,0 - what i have to do?
In other PC older Autocad was it simply command "move", selecting objects, pointing basepoint and then typing "0,0,0" and object were there! Now the object doesnt move atall. (Can move only to showing second point in screen-but thisway its not possible to catsh exactly point 0,0,0).