Something that's been driving me around the bend lately. I have a drawing, with a viewport which I cannot select. I have unfrozen all layers, ticked the 'Selection Cycling' box, but no lines show. It's just there, a viewport, but with no viewport polyline. No way of deleting, or clipping, or doing anything with it.
View 5 RepliesI am having an issue with the Trajectories I cant move or select the keys within the viewport.
I used to select the object> Selecting Trajectories within the motion panel > Selecting Sub-Object.
We have a drawing with multiple layouts and active viewports in them. For some reason we are unable to select some of the viewports so that we can resize them. we can see them we just can not select them. I do not see any settings that would affect this.
I checked to make sure the layers are all on and thawed - i am not able to see if the viewport is locked since I can not select it .
I am having issues with creating viewports in the attached file. When I open the layout, say layout 3, it shows the viewport frame but I cannot highlight it in order to delete it. This is a setting in this file I have inadvertently turned on or off. I have created a new file, done a scribble, opened a layout and deleted the viewport.
View 9 Replies View RelatedHave a bit of an odd problem showing up with 3ds Max 2012 64 Bit. The viewport does not update when I select or move an object. The program registers that I did make some changes, and things like object parameters and bounding boxes will change, but the meshes will remain the way they are until I delete them and undo.
Forcing the program to redraw all views does not change anything, nor does turning on/off progressive display.
I am having an issue with the Trajectories I am trying to move the keys within the viewport but the moment I enter Trajectory mode the pivot point goes to the center of the grid and not allowing me to select the keys within the curved trajectories.
My Process consist of Selecting the animated object > Selecting Trajectories within the motion panel > Selecting Sub-Object
I can see entire drawing in the viewport but i can not see the text. I have checked my layers too. but everything is set right in layers.
View 3 Replies View RelatedWhenever I attempt to marquee select (click-hold and drag a box) in Viewport 2.0, the viewport becomes a blank white screen and instead of drawing a box my mouse draws a single thick line. When I release the mouse, the viewport will not return to normal until I move the camera. It actually does perform the selection that I would expect. However, not being able to see what I'm doing is a bit of a pain sometimes.
The irony is that it actually works fine in default and high quality modes, but I'm not able to use those because the transparency sorting is really wonky and doesn't let me see what I'm trying to work on from the angles that I need. Only Viewport 2.0 solves that problem.
I'm encountering disable of Delete key. Normally i use "Delete" key to erase object after it is selected. Since yesterday i can't use that key anymore. How to check the setting. I'm sure its not keybord's issue coz i can still use the key in other program(Excel & Word).
View 3 Replies View RelatedI just downloaded AutoCAD 2012 on my imac running on my Parallels system, meaning I have the Windows version or AutoCAD 2012 running on parallels. (Because there are too many problems with AutoCAD for mac).
There is one problem however, I cannot delete by using 'backspace' on my mac keyboard. I always have to right click the selected object and go to erase. Does there exist a keyboard shortcut for erase?
HOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
issue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
View 1 Replies View RelatedI'm trying to add rows above rows in the middle of a table. The options under Rows are all grey/not available. The last row will allow me to add a row below and the top row will allow me to add a row above. I'm unable to Delete rows, too. The table is not listed as locked or anything. Aside from retyping the table, is there something I need to do to be able to edit the table?
View 9 Replies View RelatedI could not move or copy the hatch,it seems like locked. The dxf drawing was exported from CSC OrionR18.
View 5 Replies View RelatedI have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedIn the example below, I would like to select the three dimensions 14'-1 3/8's, 2', 28' and be able to move them all up or down at the same time...how do I do that?
dims.jpg
One of my designers running 2012 AutoCAD and 2012 CADWorx, can no longer select individual parts of a GROUP by shift selecting the unwanted elements.
I have tried to modify..
Pickadd
Group
PickStyle
PickAuto
PickDrag
but to no success.
Also fiddled with her Options file, still nothing+
On the layout page I have several viewports. 2 of my viewport borders are not visible. I can not pick them, property them, delete them, or manipulate them in any way. When I activate them as "model space" view, I can work in the model space but the border still does not become visible. I only know where the border is by the truncated drawing. Is there any way to correct this problem?
Before I get the usual "turn on your layer" responses: ALL of my layers are thawed, ALL of my layers are on. I am running Civil 3D LDD Companion but have had this "glitch" on previous versions. I seem to remember the only answer is delete layout and start a new layout from scratch. Tell me this is not so!!
autocad1.jpg
im just new here..
how to delete the viewport border as shown above figure..
All I want to do is delete the **** viewports.
I've tried right clicking every **** thing on the screen. LAYER, VPORT, DELETETHEDAMNVIEWPORT
none of these commans doing anything for me.
I know this discussion title is a bit murky, but the problem is a bit odd. I have Photoshop CS6 v13.1.2. In this version, I will activate the Select Tool, check Auto-Select: Layer, check Show Transform Controls, and then while using the Select Tool I will drag to create a rectangle to select multiple layers with content within the specified area.
Unfortunately, this action only works when I begin the selection from outside of the canvas area. If started from within the canvas area, no rectangle will appear, it will show me a measurement of my selection size, and then no layers will be selected upon release.
This cannot be working as intended right? I mean multi-select dragging cannot be intended to only work when started outside of the canvas right? Is there some way to fix this issue? Is this a bug? See the images below for more information on this issue.
i have a drawing that i turned off the border of the viewport and i need to move the viewport problem is i cant select the viewport.. ive got all the layers turned on and can select inside for model space and outside for PS but cant select port itself..i even tryed select all and nothing
View 3 Replies View RelatedIf I have a viewport within another viewport and want to select the inner one - I can't. It keeps selecting the outer viewport instead.
I can move the smaller viewport out, set it up, then drop it back in, but is there an easier way?
I have some viewports in paper space and when I resize the view port, the objects inside move in a strange way. I don't know if a variable got reset or something but this is weird. Normally I can resize a viewport and the objects stay in the same location. But now they seem to be moving relative to the edge of the viewport.
View 9 Replies View RelatedFirst I click in my viewport and select a few objects (lines/blocks etc) then whenever I type Pan or hold down my center mouse button to Pan. The Command line says the Viewport is viewlocked switching to paper space.
Now by switching to paper space everything I selected has now unselected. This basically leaves me the option to select what I see on the screen at one time and can't pan along and select anything else which is unbelievably frustrating on large drawings.
I am having trouble trying to select certain lines in order to delete them.I am using AutoCAD 2009.
I am needing to import my map to a program to use.When I import the map the program is only showing the useable portion of the map in the top right corner because there are some invisible objects hidden at the edge of the .dwg file. When i hit cntrl+a, these show up but otherwise I can't select them. I would like to know how to make these items selectable so i can delete them.
I have three drawings in modelspace and three viewports in one layout (paperspace), I would like to select each modelspace drawing and assign it to each layout viewport.I'm using Visual Studio 2012, .NET Framework 3.5 and Csharp.
View 4 Replies View RelatedHow to select or delete the unwanted switches in my layout drawing ? I can select it ... may i know what layer is that and it doesn't appear in my model drawing...
View 6 Replies View RelatedI've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
View 4 Replies View RelatedWe have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done. This happens with any drawing she opens. She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit. The viewports are not locked.
We have had several people look at it and cannot find what command or setting she changed. She does not have admin rights so I do not think she could have run a script. She is not familiar with AutoCAD Architecture, her experience has been limited to Revit.
How do you delete a constraint between a point and the center point of a line? (in the sketch environment)
View 2 Replies View Related