AutoCAD Inventor :: Unable To Delete Constraint
Jun 14, 2013How do you delete a constraint between a point and the center point of a line? (in the sketch environment)
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Angle Constraint / Drive Constraint
Jul 30, 2012I am designing a vertical axis wind turbine just for some practice (just started using Inventor) and everything was going smoothly until I tried to "animate" it spinning. First, I set up a work plane that goes through the center of the structure, and then I clicked angle constraint "explicit reference vector." After watching several youtube videos, I figured that I should click on the work plane, click on another reference point, and then click another point that would be orthogonal to those two (right?). Well after I choose the first point, Inventor will only allow me to choose the center axis as the second option (which I think should be the third option).
View 6 Replies View RelatedAutoCAD Inventor :: Unable To Delete Sick Sketch Reference
Feb 21, 2012I have a sketch reference that is giving a cross part failure error. I am unable to select the reference in the browser so I cant delete it or update it.
How to get rid of it. Deleting the sketch and starting again will be a disaster.
Using 2011SP2 XP64.
AutoCAD 2010 :: Unable To Use Delete Key
May 21, 2012I'm encountering disable of Delete key. Normally i use "Delete" key to erase object after it is selected. Since yesterday i can't use that key anymore. How to check the setting. I'm sure its not keybord's issue coz i can still use the key in other program(Excel & Word).
View 3 Replies View RelatedAutoCAD Inventor :: X / Y / Z Component Constraint
Aug 14, 2012I have an assembly which has components mated to a radial surface, I need to locate the center of a round slot against an axis, I have X Y coordinates, how can I constrain that part to those X Y coordinates?
Attached is a picture of the assembly.
AutoCAD Inventor :: How To Constraint A CHAIN
Nov 28, 2011I am currently creating a chain block to be animated later on. But, I do not know how to constraint it.
I have attached a zip file of the .ipt and .iam
AutoCAD Inventor :: Fix The Angle Constraint?
Mar 10, 2010Maybe I've just been doing it wrong for the last 5 years, but the Angle constraint is obnoxiously unpredictable. When I constrain a part in an assembly with an angle constraint from the assembly origin plane (or anything else), Inventor always has two solutions; a positive and negative.
Is there something I'm missing here, or is just a design flaw we have to live with?
AutoCad :: Unable To Delete Or Remove A Layer?
May 25, 2012In this particular drawing I have a layer I can see in my Layers Properties Manager but I cannot find in my drawing and it will not let me remove it.
this is a record of what I have just done:
Command: PURGE
Purged *D19.
Purged *D27.
Purged *D32.
Purged _None.
Command: *Cancel*
Command: <Switching to: 3D>
Regenerating layout.
Regenerating model - caching viewports.
[code]....
AutoCad :: Unable To Delete Viewpoints As It In Defpoints
Apr 4, 2011I use previous drawings to continue with new jobs.
so... I started to use defpoints as the layer for the the viewing window. This is so it doesn''t print out. However to make new sheets I copy and paste new sheets. The problem is I cannot delete the viewpoints as it in Defpoints and becomes invisible in Paper space. How can I delete one window?
AutoCAD Inventor :: Placing Tangent Constraint
Jun 1, 2012I am trying to place a tubes cylindrical surface to another tubes cylindrical surface using add constraint. How do I specify which side of the target surface to apply the constraint ?
View 4 Replies View RelatedAutoCAD Inventor :: Transitional Constraint Between Pin And Surface
Apr 16, 2013I have a question regarding a transitional constraint between a pin and a surface within an adaptive assembly.
I would like the pin and the surface to be transitional only when the two parts "interfere" with each other.
At the moment with the example attached part A is remaining tangent to part B, restricting the necessary movement of part B to function properly in the mechanism.
In simplified terms I need part B to be able to break free of the "transitional constraint" of part A under certain movement conditions within the mechanism.
AutoCAD Inventor :: Parallel Constraint In Assembly
Dec 29, 2011This is probably a simple one that I am missing, but how do I get a parallel constraint applied to these two edges.
View 4 Replies View RelatedAutoCAD Inventor :: Deleting Coincident Constraint
Aug 15, 2008I have noticed what I consider a bug in AI2009. When trying to delete a coincident constraint using the show constraint command, it is impossible to do so. All other constraints I can delete while I am in the "show constraints" dialog box, but not coincident constraints. As soon as I get out of the "Show constraints" command, the yellow dots are still showing and I can then hover over them and they highlight so I can delete them. Is this how it was intended or should I be able to delete them like the others while still in the "show constraints" command?
View 9 Replies View RelatedAutoCAD Inventor :: Constraint Symbols On Cursor Gone?
Oct 8, 2013I'm running 2014. Somehow, in my ignorance, I have managed to turn off the constraint symbols that show up beside the cursor as I'm sketching.
View 1 Replies View RelatedAutoCAD Inventor :: Expand Constraint Window
Dec 18, 2012Is there a way to expand the constraint window so that I can see my entire parameter formula? In the image below, my equation is cut off in the "offset" window. Or am I supposed to be inputting the parameters in some other manner?
View 9 Replies View RelatedAutoCAD Inventor :: Parametric Constraint Errors
Jul 24, 2012I'm having a really difficult time maintaining my parameters when making changes to the part I've made in the attachment. The control parameters for this part are:
-100 mm distance between 15mm circles
-1 of the 15 mm holes
-30 mm hole
I am new to inventor but I would also like to be able to set up my constraints correctly. I'm also not sure if my sketches are ideal for this part either. I usually get an error concerning my fillets from the base to the center support beam when I try to change the 100 to 75.
AutoCAD Inventor :: Revolution Constraint For A Bolt
Jul 19, 2012I've assembled a bolt and a slide block that is constrained to a base plate and am able to put everything in motion. I have the slide block constrained to slide the distance of the base plate and when I reach the end the bolt continues to rotate when, if this was a real part, should stop. How can I get this bolt to stop once the slide block reaches its ending constraint?
View 2 Replies View RelatedAutoCAD Inventor :: Deleted Origin Constraint
Sep 28, 2011How do you constrain an object to the origin once the origin constraint has been deleted. I'm not really sure how it became unconstrained in the first place. When I try to constrain the drawing using the coincident constraint it won't allow me to select the origin.
View 1 Replies View RelatedAutoCAD Inventor :: Fixed Placed Components With One Constraint
Jul 5, 2012Why can I not constrain placed objects with three constraints? Anything I place constrains with one constraint then is virtually fixed (without being) and cannot even be moved to allow for further constraining.
View 9 Replies View RelatedAutoCAD Inventor :: Assembly UCS To Part UCS Constraint
May 16, 2013My need is to assembly parts into an assembly by a known position in the assembly. The part has a UCS and I create UCS on the assembly programatically. What I cannot do is to constrain the two UCS. I tried this (Inventor 2013 x64 on W7/W8 64, c++ 2010 by the way DEBUG mode is not working from the IDE):
CAssemblyComponentDefinition compDef = doc.get_ComponentDefinition();
// MOdules UCS
CUserCoordinateSystems coords = compDef.get_UserCoordinateSystems();
CTransientGeometry geom = m_InventorApp.get_TransientGeometry();
CMatrix matrix = geom.CreateMatrix();
[code]...
AutoCAD Inventor :: Take Two Object Z Axis And Constraint Them To Be Same
Apr 19, 2013Basically, I would like to do this:
[URL]..........
(i.e., take two object Z axes and constraint them to be the same), but in C#. In particular, what puzzles me is that I cannot make
'Get the Z-axis work axis from the occurrent.
Dim oPartAxis As WorkAxis
Set oPartAxis = oPartOcc.Definition.WorkAxes.Item(3)
in C# because the Definition object has not a WorkAxis instance.
AutoCAD Inventor :: Drive Constraint In 2013
Jul 30, 2012See attached screen shot.
To activate the new position of the assembly of approx 5k instances takes about 5 minutes in IV 2013 when using Drive constraint. The larger the assembly the longer it takes
In IV2011 takes about 10 seconds. I've never seen the "Not responding" sign in Drive constraint window in previous versions. I'm just wondering how can avoid this "New feature" of 2013.
AutoCAD Inventor :: Slow Reaction For Constraint
May 10, 2012We have an interesting problem after reinstalling the software. We found that there is a time lag between the mouse pointer and the line highlight to indicate we have click the correct entity. The video attached in the link below may be able to explain our problem better. In the video, we move the mouse to where we want it and it shows a time lag.
[URL].......
AutoCAD Inventor :: Can't Select Sketch Constraint
Oct 12, 2011 I can't seem to get inventor to select a given parameter inside a sketch. It keeps giving me an error.
All I want to do is to have inventor Select / Highlight a parameter inside of a sketch so the user can clearly see it in the window. Ive tried heaps of different selection options, I just can't work out what ive done wrong.
Sub GetParameter()Dim TargetName As StringDim oCompDef As PartComponentDefinitionDim oSketch As PlanarSketchDim oConstr As DimensionConstraintDim oParam As ParameterDim oCmdMgr As CommandManagerTargetName = d0 ' parameter nameSet oCmdMgr = ThisApplication.CommandManagerSet oCompDef = ThisApplication.ActiveDocument.ComponentDefinitionFor Each oSketch In oCompDef.Sketches For Each oConstr In oSketch.DimensionConstraints If oConstr.Parameter.Name = TargetName Then Set oParam = oConstr.Parameter oSketch.Edit Call oCmdMgr.DoSelect(oParam) Exit Sub End If NextNextEnd Sub
AutoCAD Inventor :: Rotate WITH Constraint In Assembly?
Jun 24, 2013I have an assembly wherein one part is mated to another grounded part, with a face-to-face coincident mate. The click + drag type of movement appears to move the part, while continually solving this constraint.
However, it seems like there is no way to do a rotation in the same manner, where the constraint is continually updated. There appears to only be the "Free Rotate" command, which ignores the constraints.
Is there really no way to do this in Inventor? The application is that I am laying out a mold for many, many small parts, and I am trying to move and rotate them into position to get good packing efficiency and density. Each part will be attached to a mold base with one of the aforementioned face-to-face constraints, then slid & rotated around manually.
This seems like a really important piece of functionality. Solidworks can certainly do this, do a part rotation in an assembly, while solving for existing constraints.
AutoCAD Inventor :: Assembly Rotating Constraint
Mar 24, 2013I am using Autodesk Inventor Professional 2013.
Motor Model 1:1 is used to turn the wheel holders at various angles. The part named "front gear spring holder" is supposed to revolve and turn the inner part of the "front wheel holder" My problem is that I want to simulate the turning of the front wheel's using contact sets or 3d/2d contact sets in the dynamic simulation environment. I do not know how to do this, but I'm almost certain the program is capable of doing so. Also the spinning of the front wheels must be able to be done along with various angles of the front wheels(while turning, the front wheels must be able to still spin with the front gear spring holder".
I have seen threads and articles that say that making gears with contact sets is not recommended or possible but i have two instances here where they work perfectly fine using the dynamic simulation with 3d /contact sets. Take a look at the simulation I have saved as well.
I will need more on this assembly in the future, including how to create bevel gears that work at 90 degree angles or spur gears with contact sets instead of just simulating their movements .
AutoCAD Inventor :: How To Create A Motion Constraint
Mar 14, 2012Attached is an assembly that I created. It includes a timing belt, 2 pulleys, 2 shafts, and some profile lugs that are attached to the belt with a false tooth.
1. why can't I constrain the profile lugs around the radius of the belt? Also, when I created the belt and put the holes in it, they disappeared because they ended up in the radius of the belt.
2. Is it possible to create a motion constraint to this model, so that it moves like a real belt?
AutoCAD 2013 :: Unable To Edit Text Or Delete Anything
Jul 4, 2012I am using 2013LT. It crushed yesterday. Today when I opened my drgs. I can not edit text, delete anything. I also have noticed that menu under right click does not have the same options as before ie. block edit is not there and so on. I have opened differend dwg ones that I wasn't working on when it crushed and the same thing happed.
I opened my drawings with 2012LT and everything works fine.
AutoCAD 2013 :: Unable To Delete Text Style
Jul 1, 2013I`m working on this architecture project and copied some clean lines to the file from a landscape design project.
Somehow these text styles showed up to my file (more than 50 text styles from xrefs, because of their strange names, even though I don`t have any attachment). And it says that I cannot delete them cause I`m using it.
I`ve tried out everything I could imagine and read about it. It doesn`t work. Now this simple .dwg file is very heavy and with a lot of unwanted text styles. Even if I try to copy just the lines to start over another file, all the text styles go together.
Tried:
PURGE
AUDIT
RECOVER
WBLOCK
TXTMRG (not sure how to use it)
QTEXTMODE
Attached is one of the files that this happened to. As I`m working with a few attachments this happened to all of it. My default text style are "B3_1.5", "B3_2.0" and "B3_3.0". All the other are unwanted text styles.
AutoCAD 2013 :: Unable To Delete Hidden Objects
Nov 19, 2012We are using AutoCAD 2013 and our client is using Mechanical Desktop 2009 ,problem we are facing is that we are unable to see the object which they see in the same drawing by giving visible command. These unwanted objects remains even after purging the drawing and we are unable to delete at our end as we cannot see them because there is no such command like visible in AutoCAD.
View 5 Replies View RelatedAutoCAD Civil 3D :: Unable To Merge / Delete A Layer
Sep 24, 2013There's a layer in the drawing we received from the surveyor that doesn't match the client's standards. When I try to merge it with another layer or delete the layer, the command stops as soon as I pick a line on the layer. There are no objects visible on the layer so it may part of a style. I don't think it's part of a block as the surveyor used the client's blocks.
View 5 Replies View Related