AutoCAD 2010 :: Unable To See Text In Viewport
Mar 11, 2012I can see entire drawing in the viewport but i can not see the text. I have checked my layers too. but everything is set right in layers.
View 3 Replies
ADVERTISEMENT
AutoCAD 2010 :: Unable To Delete / Move Or Select Viewport
Aug 13, 2013Something that's been driving me around the bend lately. I have a drawing, with a viewport which I cannot select. I have unfrozen all layers, ticked the 'Selection Cycling' box, but no lines show. It's just there, a viewport, but with no viewport polyline. No way of deleting, or clipping, or doing anything with it.
View 5 Replies View RelatedAutoCAD 2010 :: Text And Dimensioning On Viewport
Mar 5, 2013My first immediate issue is text and dimensioning on view port.
If I dimension in a viewport, these dims appear on other view ports (referencing info at different scales) I thought I can write text and dimension specific to view port even if information repeated around sheet.
Secondly, if i have the above situation of my detail at 1:10 then more at 1:5/1:2, I want the hatch scale to be uniform in all viewports. What is the setting (so if hat5ch lines 2mm apart in 1:10 then I want them 2mm apart in the 1:2 as well.
AutoCAD 2010 :: Bold Text Inside Viewport And Slim Text Inside Paperspace?
Feb 8, 2013I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
AutoCAD 2010 :: Dimension - Unable To Edit Text
Jan 25, 2012I have a problem to edit the dimension with autocad 2012. When i try to double click on the dimension text, i have a error message. This command doesn't exit.
View 3 Replies View RelatedAutoCAD 2010 :: Unwanted Linetypes And Text Styles Unable To Purge?
Jul 17, 2013We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
AutoCad :: Unable To Select Viewport
Jul 24, 2008We have a drawing with multiple layouts and active viewports in them. For some reason we are unable to select some of the viewports so that we can resize them. we can see them we just can not select them. I do not see any settings that would affect this.
I checked to make sure the layers are all on and thawed - i am not able to see if the viewport is locked since I can not select it .
AutoCAD Architecture :: Unable To Edit In Viewport (layout Tabs)
Oct 2, 2012We have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done. This happens with any drawing she opens. She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit. The viewports are not locked.
We have had several people look at it and cannot find what command or setting she changed. She does not have admin rights so I do not think she could have run a script. She is not familiar with AutoCAD Architecture, her experience has been limited to Revit.
AutoCad :: Unable To Delete Viewport Frame To Make Custom One
Sep 20, 2012I am having issues with creating viewports in the attached file. When I open the layout, say layout 3, it shows the viewport frame but I cannot highlight it in order to delete it. This is a setting in this file I have inadvertently turned on or off. I have created a new file, done a scribble, opened a layout and deleted the viewport.
View 9 Replies View RelatedAutoCad :: Unable To Edit Unlocked Layers / How To Change Default Viewport Scale List
Jun 8, 2011I just started using 2012. Two problems:
1- Somehow, in my current drawing, everything is layer-locked. There are no Xrefs in this very basic drawing. All layers are unlocked. Yet, any attempt to select any entities results in "x objects were on a locked layer". Again, all layers are unlocked. No Xrefs. No blocks. Just simple lines. All entities appear faded. This happened after viewing a layout in both paper and model spaces. Reviewing the text window shows no strange accidental commands.
2- There is a default set of viewport scales in the status bar at the bottom right. Default scales are all metric. I would like both metric and imperial. I see you can edit which exact scales are in a metric list, and which are in an imperial list. But how do you set what is displayed/available in the status bar button?
AutoCAD 2010 :: Dim Scale Per Viewport?
Apr 6, 2011i have in model one drawing, in layout i have 4 viewports, each have different scale, now.. how can i using same model and 1 layout to determine scale of dimentions per each viewport? or all viewports in same layout have same scale of dimention?
View 5 Replies View RelatedAutoCAD 2010 :: Viewport Changes To Top View
Dec 14, 2012I have a problem with one specific drawing where I have created a right viewport; however, if I double click in the port to enter model space, the viewport automatically changes to a top view. If the viewport is locked, no change to the view. This problem only exhibits itself in one drawing so it must be some setting that is drawing specific.
View 1 Replies View RelatedAutoCad 2D :: Viewport Scaling In Map 3D 2010
Nov 9, 2011We have recently been upgraded to Autodesk Map 3D where I work which when we first got it was a big improvement from what we were running. When I first started using the programme I found the lovely little box in the bottom right hand corner where you can change the view scale.
This allowed me, when in paper space, to double click in a viewport then click the drop down arrow next to the Viewscale box, select custom and then type in the scale I wanted (i.e. if 1:200 I typed 200 then hit ok).
However all of a sudden I am no longer able to do this. When I press ok, nothing changes. There are no error messages or any message. It appears to disregard the command. There is also a closed padlock next to this which when hovered over gives the discription "click to link/unlink AutoCAD Map 3D stylisation while zooming". I am unable to unlock this by clicking on it, the padlock seems protected almost so I am wondering if this is my problem?
AutoCAD 2010 :: Viewport Scale In Paperspace
Feb 14, 2013In paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
AutoCAD 2010 :: Doubleclick In A Viewport To Edit
May 23, 2013I'm working on a new computer and some of the ACAD settings are different.. When I am in paperspace, I am used to just double-clicking in a viewport to work in modelspace..
Whether the viewport is locked or not, I am used to being able to zoom in and out to scale, or just work there and the viewport stays stationary.
There is some setting that is causing the viewport to "zoom out" every time I double click in the viewport. I have to then lock it which means that I can't change the zoom-to-scale factor.. It's also a pain in the neck.
Also, when I have multiple viewports open that are not locked, they all "zoom out" also when I double-click in one..
Any knowledge of some setvar to fix?
AutoCAD 2010 :: First Scroll In Locked Viewport
Dec 21, 2011I have this problem with AutoCAD 2012 and with LT2011. When first opening a drawing in a layout with the viewport locked and activated, the first scroll action moves the drawing within the viewport. After the first scroll, any scrolling moves the entire viewport as it should when locked. Putting the drawing back to where it was within the viewport requires unlocking the viewport or undoing everything back to the first scroll action. This is very anoying especially if you are zoomed in and can't see the edges of the viewport and don't notice the move right away. I did not have this problem in the older versions.
View 2 Replies View RelatedAutoCAD 2010 :: Layer Not Showing In Viewport
Dec 12, 2012I have a master drawing with multiple xrefed building sketches. Looking at the model space on the "master" I can see all the room identities. However, if I go to the sheets that I have created and look at the view ports. The room identities are not there. The layer is called A-Room-Iden and it is on and not frozen...
View 3 Replies View RelatedAutoCAD 2010 :: Viewport / Leader Visibility
Oct 9, 2013I have a drawing which has 3 viewports in it, two of the viewports are ok but with the third one when i try to have a leader from it to a text box outside the viewport in paperspace, the section of the leader within the viewport is blanked out,. I have tried bringing the leader to the front and sending the viewport to the back along with regenning the drawing to no avail. the leader works ok with the other two viewports no issue there but with the third one it just will not work. The viewport is used for viewing a location using a raster map image and it does show the leader / line object when zoomed out and disappears again when the line goes over the raster image.
View 6 Replies View RelatedAutoCAD 2010 :: Viewport Warning Before Print
Aug 26, 2013I have a few viewport on a drawing and when I hit Print I get the following warning:
" some viewports do not fit the right zoom conditions. Do you want to update them before plotting"
It then proceeds to print correct.
What is the reason for this error message and how do I get rid of it?
AutoCAD 2010 :: Error Scaling Viewport
Sep 24, 2013Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.
View 1 Replies View RelatedAutoCAD 2010 :: Exiting A Unlocked Viewport?
Sep 2, 2009I am trying to figure out a way to exit a activated viewport that I am in. I am zoomed in on a area in the activated viewport. Well sometimes I forget to lock the viewport before I zoom in. So then I cant zoom back out and deactivate the viewport.
View 9 Replies View RelatedAutoCAD 2010 :: Dimensions In Viewport Out Of Sync
Aug 26, 2010Why is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
AutoCAD 2010 :: Viewport Keep Zooming To Extent
Mar 25, 2013how to keep the current zoom scale in (Model) viewport AS IS..the problem is, when i click the other of viewport, the other view zooms to drawing extent..
View 2 Replies View RelatedAutoCAD 2010 :: How To Turn Layers Off In Each Viewport
Apr 9, 2013From Model I made 3 view ports. How can I turn layers off in each viewport?
View 9 Replies View RelatedAutoCAD 2010 :: Viewport Colours Overrides?
Sep 3, 2012I have a drawings with multiple layouts. In the first layout the whole drawing looks exactly like in does in model space, with reference to the colours. In the other layout the drawings all change colour to what they will look like when printed.
In these other layouts if I copy a viewport the colour returns, but if I change to another layout and back again then it reverts to what the original was. I have attached an image.
The copied vp is the one on top.
Like I said proably a quick fix but I dont know where to start. Is it something to do with Vp colour overrides?
AutoCAD 2010 :: Paperspace And Viewport Display
Jun 21, 2012Another user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
View 5 Replies View RelatedAutoCAD 2010 :: How To Set LTSCALE To Scale Of Viewport
Feb 16, 2012I've always been taught to set the LTSCALE to the scale of my vport, and set psltscale to 0 (Civil Design). And it has always worked great until I came to work at an Enviromental Consultant frims, that likes to mix units and do stuff the hard way. But thats beside the point.
I've read multiple post about setting the LTSCALE to 1 or .5 and leaving PSLTSCALE to 1 or whatever. There are TONS of post about it.
The reason I'm bringing it up is because EVERYBODY in my drafting department sets the LTS to 1, then manulipates the linetype scales individually threw the properties. This drives me absoutly insane!
So if I have a drawing that the vport is to 1:80, what should the LTSCALE and PSLTSCALE be set to?
AutoCAD 2010 :: Copying And Pasting In Viewport
Jul 11, 2012Got a question regarding copying in viewports that are in the paper space. Basically i have a model space where the whole drawing is kept and bunch of other paper space tabs/layouts that have viewports in them. Now the problem is when i have to do a quick fix in paper space, ill double click to go "inside" the viewport to i can edit it. While inside the viewport i would do CTRL-C on some objects or text and after that suddenly autocad would crash and windows would say Autodesk Application has stopped working, and you can only click cancel and when you do it just closes AutoCad. I dont know if this is a bug or is it due to memory management. I have 8Gb of Ram on the machine and running AutoCad 2012 LT.
View 1 Replies View RelatedAutoCAD 2010 :: Why Can't Modify Paperspace Viewport
Dec 4, 2012When working in a paperspace layout I am not able to move or re-size the default viewport. Upon selecting the viewport and attempting to move it I receive the following command line message: "1 was not in the working set." The viewport appears to be fixed and non-editible. What does the message mean? Would putting the viewport in the working set make it editable, and if so, how is this done?
View 2 Replies View RelatedAutoCAD 2010 :: Cannot Freeze Certain Layer By Viewport
Oct 12, 2012i have one layer, when trying to freeze by viewport, does not show the icon for such, other layers do, what would cause this?
View 1 Replies View Related3ds Max :: Unable To Change The Viewport Layout
Sep 8, 2011I just install the max 2012,but i can just have one viewport,then I go to the viewport configure to change the layout,but it can not change. what is the problem？
View 3 Replies View Related