AutoCAD 2010 :: Text And Dimensioning On Viewport
Mar 5, 2013
My first immediate issue is text and dimensioning on view port.
If I dimension in a viewport, these dims appear on other view ports (referencing info at different scales) I thought I can write text and dimension specific to view port even if information repeated around sheet.
Secondly, if i have the above situation of my detail at 1:10 then more at 1:5/1:2, I want the hatch scale to be uniform in all viewports. What is the setting (so if hat5ch lines 2mm apart in 1:10 then I want them 2mm apart in the 1:2 as well.
View 5 Replies
ADVERTISEMENT
Jan 2, 2014
The company I now work for does everything in 3D with vanilla AutoCAN'T, 2012-2014. There are only a few 2D objects in any file. The problem I'm running into is when dimensioning the 3D geometry in paperspace, the dimensions will not always stay anchored to the points that I've snapped to. If I have to go into the block editor the dimensions will fly all over the place when I exit it.
VIEWBASE really useful to alleviate this problem, but not everyone is on the same version and we're saving back to a 2010 format which creates proxy objects when opened on another machine. I'm not sure if I have the freedom to start using it.
View 9 Replies
View Related
Mar 11, 2012
I can see entire drawing in the viewport but i can not see the text. I have checked my layers too. but everything is set right in layers.
View 3 Replies
View Related
Feb 8, 2013
I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
View 9 Replies
View Related
May 20, 2012
Is autocad 2012 capable of dimensioning a solid object in model space horizontally vertically and diagonally say across the opposite corners of a cube, or along the hip of a roof? What am I missing here, I am using the full version of autocad for exactly this feature but am still unable.
View 4 Replies
View Related
Jun 6, 2013
Whilst dimensioning in paperspace I dont seem to be able to get the dimesions to sit above the drawing in model space. for example if I place a leader across the drawing to a specific point the leader sits under the drawing and is lost/hidden. how I set the dimensions to sit above the drawing.
View 1 Replies
View Related
Jul 15, 2011
I created a drawing using the new VIEW BASE system. I am trying to dimension the views using ordinate dimensions. How do you set the UCS 0,0 to a corner of the part?
View 5 Replies
View Related
Aug 15, 2012
How to change your settings so that when dimensioning an object that is in model space, while floating over it in paper space, it will give you the actual dimensions in model space?
Seems that it should be a variable setting or something you can change in DIMSTYLE.
View 4 Replies
View Related
Sep 3, 2013
Quick dimensioning a number of blocks doesn't work. Is there a way to do this without exploding the blocks.
For example I have 10 blocks at various intervals and I want to pick up the centre line position of each block to show the dims between each block centre.
View 1 Replies
View Related
Aug 3, 2012
I'm wondering is it possible to orientate the dimension text alligned to paper(2.jpg) but not the UCS of Isometric drawing(1.jpg).
Sometime I need to allocate my drawing with dimensioning in isometric view because its more easy to read.
I'm placing my drawing in *.idw.
View 8 Replies
View Related
Feb 6, 2013
I find the 3D side of the software is great for modeling. But when it comes to the 2D drawing side of it, especially dimensioning and the adding of text label is very poor, when compared again other CAD packages including AutoCad Mechanical and LT.
Why is it not on par with AutoDesk other 2D packages!
(Using Inventor 2013)
View 1 Replies
View Related
Apr 6, 2011
i have in model one drawing, in layout i have 4 viewports, each have different scale, now.. how can i using same model and 1 layout to determine scale of dimentions per each viewport? or all viewports in same layout have same scale of dimention?
View 5 Replies
View Related
Dec 14, 2012
I have a problem with one specific drawing where I have created a right viewport; however, if I double click in the port to enter model space, the viewport automatically changes to a top view. If the viewport is locked, no change to the view. This problem only exhibits itself in one drawing so it must be some setting that is drawing specific.
View 1 Replies
View Related
Nov 9, 2011
We have recently been upgraded to Autodesk Map 3D where I work which when we first got it was a big improvement from what we were running. When I first started using the programme I found the lovely little box in the bottom right hand corner where you can change the view scale.
This allowed me, when in paper space, to double click in a viewport then click the drop down arrow next to the Viewscale box, select custom and then type in the scale I wanted (i.e. if 1:200 I typed 200 then hit ok).
However all of a sudden I am no longer able to do this. When I press ok, nothing changes. There are no error messages or any message. It appears to disregard the command. There is also a closed padlock next to this which when hovered over gives the discription "click to link/unlink AutoCAD Map 3D stylisation while zooming". I am unable to unlock this by clicking on it, the padlock seems protected almost so I am wondering if this is my problem?
View 4 Replies
View Related
Feb 14, 2013
In paperspace I set the viewport scale to 1-1/2"=1'-0" on a ANSI D-size plot. But when plotted at (layout) 1:1, it comes out to be 1/8"=1'-0" on a engineering scale.
Explain Autodesk's logic?
View 1 Replies
View Related
May 23, 2013
I'm working on a new computer and some of the ACAD settings are different.. When I am in paperspace, I am used to just double-clicking in a viewport to work in modelspace..
Whether the viewport is locked or not, I am used to being able to zoom in and out to scale, or just work there and the viewport stays stationary.
There is some setting that is causing the viewport to "zoom out" every time I double click in the viewport. I have to then lock it which means that I can't change the zoom-to-scale factor.. It's also a pain in the neck.
Also, when I have multiple viewports open that are not locked, they all "zoom out" also when I double-click in one..
Any knowledge of some setvar to fix?
View 3 Replies
View Related
Dec 21, 2011
I have this problem with AutoCAD 2012 and with LT2011. When first opening a drawing in a layout with the viewport locked and activated, the first scroll action moves the drawing within the viewport. After the first scroll, any scrolling moves the entire viewport as it should when locked. Putting the drawing back to where it was within the viewport requires unlocking the viewport or undoing everything back to the first scroll action. This is very anoying especially if you are zoomed in and can't see the edges of the viewport and don't notice the move right away. I did not have this problem in the older versions.
View 2 Replies
View Related
Dec 12, 2012
I have a master drawing with multiple xrefed building sketches. Looking at the model space on the "master" I can see all the room identities. However, if I go to the sheets that I have created and look at the view ports. The room identities are not there. The layer is called A-Room-Iden and it is on and not frozen...
View 3 Replies
View Related
Oct 9, 2013
I have a drawing which has 3 viewports in it, two of the viewports are ok but with the third one when i try to have a leader from it to a text box outside the viewport in paperspace, the section of the leader within the viewport is blanked out,. I have tried bringing the leader to the front and sending the viewport to the back along with regenning the drawing to no avail. the leader works ok with the other two viewports no issue there but with the third one it just will not work. The viewport is used for viewing a location using a raster map image and it does show the leader / line object when zoomed out and disappears again when the line goes over the raster image.
View 6 Replies
View Related
Aug 26, 2013
I have a few viewport on a drawing and when I hit Print I get the following warning:
" some viewports do not fit the right zoom conditions. Do you want to update them before plotting"
It then proceeds to print correct.
What is the reason for this error message and how do I get rid of it?
View 1 Replies
View Related
Sep 24, 2013
Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.
View 1 Replies
View Related
Sep 2, 2009
I am trying to figure out a way to exit a activated viewport that I am in. I am zoomed in on a area in the activated viewport. Well sometimes I forget to lock the viewport before I zoom in. So then I cant zoom back out and deactivate the viewport.
View 9 Replies
View Related
Aug 26, 2010
Why is it that some dimensions in a viewport are out of sync with the rest of the dimensions? Eg. a correct dimension is 240, but the next time you dimension the same distance, you get 24 as a dimension figure?
Also, in a long run of continued dimensions one or two of the dimensions is out of scale? I have tried making all dimension Annotative, same dimstyle, etc.
I think sometimes Autocad forgets that it is in a viewport, so some dimensions are correct to the viewport scale while others are to the limits of the paper size?
View 9 Replies
View Related
Mar 25, 2013
how to keep the current zoom scale in (Model) viewport AS IS..the problem is, when i click the other of viewport, the other view zooms to drawing extent..
View 2 Replies
View Related
Apr 9, 2013
From Model I made 3 view ports. How can I turn layers off in each viewport?
View 9 Replies
View Related
Sep 3, 2012
I have a drawings with multiple layouts. In the first layout the whole drawing looks exactly like in does in model space, with reference to the colours. In the other layout the drawings all change colour to what they will look like when printed.
In these other layouts if I copy a viewport the colour returns, but if I change to another layout and back again then it reverts to what the original was. I have attached an image.
The copied vp is the one on top.
Like I said proably a quick fix but I dont know where to start. Is it something to do with Vp colour overrides?
View 5 Replies
View Related
Jun 21, 2012
Another user has created a bunch of sketches and somehow has set the drawing up where all the viewport and our title block are displayed in white. model space everything is fine and is as it should be.
View 5 Replies
View Related
Feb 16, 2012
I've always been taught to set the LTSCALE to the scale of my vport, and set psltscale to 0 (Civil Design). And it has always worked great until I came to work at an Enviromental Consultant frims, that likes to mix units and do stuff the hard way. But thats beside the point.
I've read multiple post about setting the LTSCALE to 1 or .5 and leaving PSLTSCALE to 1 or whatever. There are TONS of post about it.
The reason I'm bringing it up is because EVERYBODY in my drafting department sets the LTS to 1, then manulipates the linetype scales individually threw the properties. This drives me absoutly insane!
So if I have a drawing that the vport is to 1:80, what should the LTSCALE and PSLTSCALE be set to?
View 6 Replies
View Related
Jul 11, 2012
Got a question regarding copying in viewports that are in the paper space. Basically i have a model space where the whole drawing is kept and bunch of other paper space tabs/layouts that have viewports in them. Now the problem is when i have to do a quick fix in paper space, ill double click to go "inside" the viewport to i can edit it. While inside the viewport i would do CTRL-C on some objects or text and after that suddenly autocad would crash and windows would say Autodesk Application has stopped working, and you can only click cancel and when you do it just closes AutoCad. I dont know if this is a bug or is it due to memory management. I have 8Gb of Ram on the machine and running AutoCad 2012 LT.
View 1 Replies
View Related
Dec 4, 2012
When working in a paperspace layout I am not able to move or re-size the default viewport. Upon selecting the viewport and attempting to move it I receive the following command line message: "1 was not in the working set." The viewport appears to be fixed and non-editible. What does the message mean? Would putting the viewport in the working set make it editable, and if so, how is this done?
View 2 Replies
View Related
Oct 12, 2012
i have one layer, when trying to freeze by viewport, does not show the icon for such, other layers do, what would cause this?
View 1 Replies
View Related
