I am having issues with creating viewports in the attached file. When I open the layout, say layout 3, it shows the viewport frame but I cannot highlight it in order to delete it. This is a setting in this file I have inadvertently turned on or off. I have created a new file, done a scribble, opened a layout and deleted the viewport.
View 9 Replies
I am experimenting with adding profiles to CC to be used in frame generator - how do I delete them?
In cc editor all delete buttons are grayed out.
Something that's been driving me around the bend lately. I have a drawing, with a viewport which I cannot select. I have unfrozen all layers, ticked the 'Selection Cycling' box, but no lines show. It's just there, a viewport, but with no viewport polyline. No way of deleting, or clipping, or doing anything with it.
View 5 Replies View RelatedI was wondering how I could duplicate the texture of this gear/star thing? I want to use the same texture for a square shaped frame. I already tryed messing with the bevel and emboss layer style but I didnt get a the matching result that I desired.
My next question is how do I make my own custom bevel and emboss layer style textures?
I created a template part, turned it into an I-part and published it successfully as a Frame Member.
The custom member was published into a custom library that is read/write. I was forced to create this library in order to publish the part.
When I go to use the custom profile with the frame generator, I am able to find the custom member in the dialog but when the frame generator tries to generate the part, I get this error message:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for Unnamed GIRT-2 could not be located in the Content Center library.
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedI created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
On the layout page I have several viewports. 2 of my viewport borders are not visible. I can not pick them, property them, delete them, or manipulate them in any way. When I activate them as "model space" view, I can work in the model space but the border still does not become visible. I only know where the border is by the truncated drawing. Is there any way to correct this problem?
Before I get the usual "turn on your layer" responses: ALL of my layers are thawed, ALL of my layers are on. I am running Civil 3D LDD Companion but have had this "glitch" on previous versions. I seem to remember the only answer is delete layout and start a new layout from scratch. Tell me this is not so!!
autocad1.jpg
im just new here..
how to delete the viewport border as shown above figure..
All I want to do is delete the **** viewports.
I've tried right clicking every **** thing on the screen. LAYER, VPORT, DELETETHEDAMNVIEWPORT
none of these commans doing anything for me.
I have a plan and profile sheet set up with two viewports in it. Somehow one of the viewport's frame disapeared and I don't know how to get it back. Since it is not showing I can't click on the viewport to unlock it and adjust the view. I also can't delete it.
View 3 Replies View RelatedIt used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
View 1 Replies View RelatedDimensions show when viewport style is set to 2d wire frame, but only show when they are draged outside the viewport frame when it is set to 3D hidden. Policy is no diemensions in modle space. So how do I show dimensions in paper space with the viewport style set to 3D hidden?
View 3 Replies View RelatedI have a sick FG member but when I try and delete it I get this.
View 5 Replies View RelatedI am trying to create a viewport field so when you change the viewport scale, the title block will update. The only problem is that I when I scale to 1:500 its stating its 2:1.
As I am working with the unit scale "meters" and when I want to scale my drawing at 1:500 the command I use is z (enter) 2/1xp. But I want the viewport field to say 1:500 instead.
i'm trying to create a custom shaped viewport. Instead of using just a rectangular viewport I need to make it polygon shaped. I know I've done it before but for the life of me I cannot remember how. I'm using ACAD MEP 2011.
View 5 Replies View RelatedCan i create a custom size frame member and publish this custom size metal frame member for use with the Frame Generator?
Also is it possible to publish the frame member with a particular color?
How do you have the frame generator "point" to a custom parts directory to create from?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
In 2012, when I click on a viewport and try and to change the scale, in either quick properties or the properties window custom scale. AutoCAD only allows the standard scale settings, not a custom one. I think this is just a matter of some setting, but do not recall it.
View 5 Replies View RelatedI'm trying to find out whether I can create custom frame generator profiles in IV2014. Any solutions that I've come across aren't viable (referencing files that don't exist on my machine etc).
View 4 Replies View RelatedI have been working on this previous project "A" and I realized a few custom frame profile such as Bosch Strut and Din rails. Now I am done with project "A" and I am moving onto a new project we are going to call project "B". In this new project "B" I setup all my libraries as I would normally do, but once I start creating frames, I do not see any of the custom frame profile from my past project "A" even though I added my libraries, which are identical from project "A" to "B".
View 5 Replies View RelatedMy custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen. I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.
I saved a copy of a pipe family to "My Library" and made it an independant family.
I would like to know if there is a way to suppress size in a custom table for frame members. So far, I've copied the ANSI hss square tube library to another name and it is not linked to the previous family. What I need to do is make only certain size of these tubes available and the only way I found was to delete them. The things is I don't want to delete them because I may need them in the future. Also, when I have different materials in that table they appear as 2 diferent size in the frame generator insertion window. For example, if I have in my table a 2x2x1/8 tubing 1 in aluminum and the other in steel, I will have 2x2x1/8 X2 in the size selection window.
View 6 Replies View RelatedI recently started to publish custom profiles in my Content Center.
What I wanted to do is to add a custom profile to content center and use it in frame generator. The problem is that I want to write in my Stock Number iProperty the Ordering number of the profile type and the generated length. I did everything in the content center publisher, but somehow it dosent work. It always writes my published file length. I can see that Inventor has the tools to do this, but somehow it dosen't work.
Inventor 2012
Win 7 64-bit
Dell Precision T5400
Intel Xeon 2,5 GHz
8 Gb RAM
NVIDIA Quadro Fx 3700
[URL] ...... I have a large frame (beams and columns) made up of W shape structural steel. (10x19 and 10x26 mostly)
I need to create notches with some more clearance between the beams. Apparently you can create custom notch profiles, but I can't figure out how to do this with these members (normal content center beams) - everything I am finding is showing people creating custom beams from scratch.
Ideally, I can create one notch profile and apply it to all the beams - because I don't want to create 150 different profiles. So is it possible to add a notch profile to existing content center members?
Here is my frame - there will be lots of notching at the beam intersections.
Here is an intersection - I would like at least 1/8" clear between the edges of the intersecting members.
I am using a student version of Inventor 2012 to design the FSAE Chassis for our University team this year. I was not able to find suitable geometry for the required tubing to make the chassis. So I found a guide on setting up a Custom Content Center and publishing parts. I have followed that. The Chassis has turned out great but now I am trying to draw it up and the BOM is not populating as desired.
A Summary:
-Custom Project file with Read / Write Library added.
-Custom tubing geometry created and published to the Library.
-Chassis constructed using standard Frame Generator techniques.
Previously I had the chassis modelled using standard Content Center parts and the BOM would populate with the individual tubes in the drawing environment. Now with the custom tubes the BOM calls up each of the individual tubing sizes, ONCE only and has large quantities. The automatic "Measure" Column is also populated with "*Varies*".
In the Frame Generator wizard each tubing size has come up as it's own "Family".I believe this is because I have published the different part sizes individually. I am guessing I should have published only the one active part but with variable geometry selectable in the "Size" drop down?
I have tried forcing the assembly into the "All Levels" view with the Bill of Materials pop-up in the Assembly environment, but even this is not populating correctly.Something else I have noticed is the individual tubes are using a different naming convention in the model tree.
At my company we have a custom CC library with custom profiles for use in frage generator. We are having a problem with one of the frames. Everything goes well when the profiles is inserted.
But when I try to "trim to frame" the intersections of two profiles, it does not trim them correctly. It trims them in a 45 degree angle. As you can see on the attached jpg file.I tried everything. Checked the sketch, deleted the profile, republished the part.
I created a custom profile, IS34, and published it successfully as a structural shape for the frame gererator. My problem is I get an error when I try to use the notch command in frame generator between two of these frame members. I have tried creating a custom notch in the profile definition, but this did not work either. I expected one profile to counter-profile the other.
IS34 Profile
IS34 Frame
Error
I am using Inventor 2013.
I want to update a frame generator shape so it shows as a phantom part and won't show on the parts list. I don't know how to do this. Would I re-publish this part again? I can't just change the BOM properties in the original part file. What's the best approach here?
View 4 Replies View RelatedI am busy constructing my own Structural Shapes Library in Inventor 1012.During the Authoring and Publishing step I mapped Cross Section Properties (Ixx, Iyy, Torsional Section Modulus, Torsional Rigidity Modulus etc) to set parameters in my iPart table.
I have noticed that once this part is then used in Frame Generator to create a simple beam and then analyzed with the Frame Analysis tool, the analysis tool uses the geometry of the part to calculate these properties.
Is there a way that I can force Inventor to use the properties in the iPart Tables? I am worried that any errors in creating the cross section geometry will be carried into the Cross Section Properties calculated by Inventor.
