During text creation, I can resize the text by changing font size, use move it around..Later on if I want to modify the text (resize, move to another location)...I don't know how..
View 2 RepliesI usually use Photoshop and Fireworks, but have gotten sick of paying through the nose. I just installed Paint.net and notice that this program appears to be a great alternative to the above mentioned, but seems to be lacking a few tools. Once I get past the basics, I'll really start enjoying this program.
If I draw a square on a new layer, how do I select it to resize it or move it. I have tried to use the 'Move Selection' tool, but it keeps moving the entire layer and doesn't select the square.
What governs the location/distance from the object of the "object move symbol" when an item is selected? See attached image. I have selected the blue view reference text but the four way arrow/move symbol is way below it. This isn't using the move command. The arrows can be hard to find in a crowded sheet if it's very far from the item selected.
For reference I have added an image showing the location of the object move symbol for a text item. It's in the upper left corner of the text outline.
I'm having a heck of a time moving text once I've placed it. I assumed I could just grab the text and move it as long as I'm on that layer. I'm finding this isn't the case. What's the trick to moving text once placed?
View 2 Replies View RelatedI have just been trying to resize some images on the latest version - 3.510.4297.28964 - and I have typed the measurements that I wanted into the print size fields on the resize dialogue. The actual sizes the program resizes the images to differ though - some look to be about right, whereas some come out much larger, but they all show the dimensions that I inserted in the canvas size box.
I'm sure I've done this before and this hasn't happened?
How to create a piece of text art using Paint.net? I have been trying to create something with a variety of text element in different colors and fonts, and every time I switch to a new element, I seem to lose the ability to move and and/or manipulate the text items that I created prior. Not sure if this is clear…
View 3 Replies View RelatedI'm sure I'm doing something wrong. I'm on the right layer, selected some text with the rectangle, clicked the move tool & tried to drag the selection (have the little hand showing so I'm in the right corner) but the box just expands the contents. (I tried both move tools, although I've no idea what the difference between them is.
I have used the move tool a little in the past, and it worked.
In AutoCAD LT 2013, the Modify box on the ribbon, I regularly use about four buttons in the main box on the ribbon and I use only the Lengthen button in the drop down box. Is there a way to trade the Lengthen button in the drop down box for one of the seldom used buttons in the main box on the ribbon?
View 3 Replies View RelatedI've got several assemblys built for a road project. the problem is whenever i modify an assembly by adding a subassemby, some of the existing subassemblies move. they stay attached to the assembly but they disconnect from the part they were attached to. i can move them back so the assembly looks correct but when i rebuild the corridor chances are they show up wrong. i've tried 'move to' and just grabbing and snapping. i can eventually get it attached but not without trial and error. i'm running c3d2012.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I'm in the process of moving 100+ dwg files physically, but cannot figure out how to update the drawing locations w/o recreating a Pre-Existing fully populated (names, drawing numbers, etc.) SheetSet. Here's what I want to do:
Move dwg files from one location to another & update the new physical location (Expected/Found/Relative/Full/UNC Path) in a copy of an existing dst.
I've tried moving the files, then updating the Expected Path from within the SSM, but this works on a file to file basis, and takes a long time to perform on a 100+ drawing SheetSet. I've tried using SSMPropEditor, but for some reason, the changes do not stick. The only way that I've found to accomplish this is to use the Archive function (as a folder instead of a ZIP file) from within SSM, but there has to be an easier way to do this...
BTW: I'm using ACAD 2010 on a Core i5 XP machine.
I imported them without moving them. So they're in the catalog.How do I transfer them to the drive which contains the entire catalog. (I should have hit "move" right?)
View 2 Replies View RelatedI am having issues moving and resizing a image once it has been "placed" onto the document. It seems to be locked and even when I agree to place the image, I can still not move or resize it. This happens on all file types and CS6.
View 1 Replies View RelatedAfter loading JPEG into CS6 I select move tool. I use to just grab bounding box and pull outwards to resize and now when I pull outwards it basically zooms inside frame. How do I fix this?
View 1 Replies View RelatedWhen I place an object on the stage, I can move or resize is uzing the handles. However when I enter the coordinates or dimensions manualy nothing hapens.
I already tried to reset the workspace (F8 during startup).
Photoshop does a lot " *. TMP" files when the program is started up. These temp files, I would have moved to another location.How can I do it?
I am aware that it is possible to define which file "Photoshop Temp11309645056" to be created and how I place it at his own request, but it is not these files I ask for positioning.
In Transform controls I have write exact distance X: 1240.00 pixels (1. Picture)When I click ok, the object remains in its previous location by the guide .1240 .50 pixels (2. Picture). URL....
View 6 Replies View RelatedCan I pick a 3D sketch and move the whole thing closer to 0,0,0 ? It is currently sitting around 5km,10km,2km from zero.
This makes everything very chunky, and very difficult to visualize anything correctly.
This was generated from a site survey, which was work in progress, it has now all been finalised, but I don't want to loose a weeks work by starting again. (Using AutoCAD to move the points to Zero)
I have some blocks with a point connected to them, the point is free movable, moving the point does not move the block, but moving the block does also move the point. each block has 1 point connected to it.
what i want is to move the point of the blocks i select to the same location. (without moving the blocks themselves)
I am using autocad 2011 (tried to upload the block in question but doesn't seem to be working)
I'm following a tutorial which involves augmenting an existing engineering drawing. Part of the tutorial involves using the MOVE command.
I've been asked to move a facing brick to a new location, however when entering the co-ordinates the brick moves to a completely wrong position.
Here are the steps I'm going through:
Click Move command;
Highlight brick;
click enter;
Enter first co-ordinate;
Comma,
Enter second co-ordinate;
Then Enter.
However, the image them moves to the wrong area.
I have a PSE10 photo catalog and video catalog on my Win'7 64-bit PC. The catalog files are on my C drive (default location) and the media files are on a different internal "D" drive.
Each catalog currently resides in its own folder in the default location on C drive, and each catalog file is named "catalog.pse10db". It is curious that each file is identically named; I didn't do that, PSE did.
I want to move the photo catalog and video catalog to the internal "D" drive so that when I backup the D drive, the catalogs and media files are all backed up together.
How do I move my catalogs from the default location to a different location? I have read the "Backup and Restore Catalogs to New computer" info and think it may apply here, but I want to be sure before I try anything.
PSE11 on Win7. I have an album of images. Those images exist in a number of different folders. I would like to 'Move' them all to a new location. So all of the images would now be in the same folder.
View 4 Replies View RelatedI got HP Envy with installed PSE 9.
The catlog for PSE was located on the same drive as a programs and even I have almost empty data drive I cannot install any more programs because there is not enough space on the drive for the programs.
Questions:
1. How I can move Catalog to another drive?
2. How I can configure from the start or re-configure PSE to have Catalog in another location/drive?
was trying to move a photo to another location and I clicked on something and it asked if I wanted to create a new catalog. I said yes. Now none of my photos are appearing in my lightroom.
View 1 Replies View RelatedI have just installed lightroom 5 and it has put a file on my desktop which I do not want.
Can I delete/move the file to a different location?
I have 'User Order' sorting selected in a catalog of about 25,000 images and I want to move thumbnails around to specific locations in the grid view. Of course, I can select and drag them but I'm wondering if Lightroom has something like a move-to-new-location function according to which I can select photos to move, select the new grid position, and move the photos right to the new location. Phase One's Media Pro has this function but I'm not seeing it in Lightroom.
View 1 Replies View RelatedI've been geo tagging my RAW images before import. I copy them from the memory card to a temporary folder, geotag, then import, asking that images be moved to the "negatives" folder (organized by quarter). Things usually work, but several times recently I've been getting the subject message (with "xx" indicating a number of files). These images enumerated and named in the message are in fact moved, but are not imported.
View 8 Replies View RelatedAfter installing 5.3 to win 7 I noticed the catalogue file and folder have been placed on the desktop. Is there any way to move this to another location ?
View 1 Replies View RelatedHere's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM
I have some viewports in paper space and when I resize the view port, the objects inside move in a strange way. I don't know if a variable got reset or something but this is weird. Normally I can resize a viewport and the objects stay in the same location. But now they seem to be moving relative to the edge of the viewport.
View 9 Replies View RelatedThe Move tool - is there a way to turn off the location details as the tool moves around?
View 1 Replies View RelatedWhen I want to move an object a certain distance from the original location, I go to long winded trouble of drawing a line and attaching it to say, for example, the centre of a circle. Then MOVE the circle, selecting the base line as the centre to the end of the LINE using OSNAP.
Is this how you Pro's do it, I'm guessing not.