PSE11 on Win7. I have an album of images. Those images exist in a number of different folders. I would like to 'Move' them all to a new location. So all of the images would now be in the same folder.
View 4 RepliesI have a PSE10 photo catalog and video catalog on my Win'7 64-bit PC. The catalog files are on my C drive (default location) and the media files are on a different internal "D" drive.
Each catalog currently resides in its own folder in the default location on C drive, and each catalog file is named "catalog.pse10db". It is curious that each file is identically named; I didn't do that, PSE did.
I want to move the photo catalog and video catalog to the internal "D" drive so that when I backup the D drive, the catalogs and media files are all backed up together.
How do I move my catalogs from the default location to a different location? I have read the "Backup and Restore Catalogs to New computer" info and think it may apply here, but I want to be sure before I try anything.
I got HP Envy with installed PSE 9.
The catlog for PSE was located on the same drive as a programs and even I have almost empty data drive I cannot install any more programs because there is not enough space on the drive for the programs.
Questions:
1. How I can move Catalog to another drive?
2. How I can configure from the start or re-configure PSE to have Catalog in another location/drive?
I'm tring to reorganize after a computer crash. How do I move multiple folders to a new location?
View 1 Replies View RelatedI have a fairly large catalog with about 20 album categories, each with between 5 and 15 albums, totalling about 20,000 photos, all currently residing on my laptop. I need to move everything to a networked drive but can't find how in the Elements help system.
View 3 Replies View RelatedWhen I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database?
View 2 Replies View RelatedSometimes it works. Lately it rarely does. I have tried holding the command key and this does nothing. Why can I not move objects anymore.
View 3 Replies View RelatedHow can I store images in my Photoshop Elements 10 organizer in a Cloud location?
View 2 Replies View RelatedI was working with Elements 7 and have switched to the new Elements 11.
I used to be able to minimize my images and have them on my workspace side-by-side. I liked the convenience of dragging and dropping as well as seeing things right beside each other.
I can't figure out how to do it with PSE11.
PSE 11. How can I move a directory on my hard drive that contains images to another drive from within PSE 11?
View 1 Replies View RelatedPhotoshop Elements 6 (20070910.r.377499)
I do not know why the catalog has changed the file location of "ALL" pictures to the location on my backup drive.
Example: K:My DocumentsMy PicturesPetsPICT1460-1.JPG
The actual location of the original photo is: D:My DocumentsMy PicturesPetsPICT1460-1.JPG
The location of "My Pictures" is on my primary Hard Drive D:My DocumentsMy Pictures
Why is Photoshop changing all of my 37,000+ photo thumbnails to point to my Backup Drive K:?
I need to correct the catalog file. How do I make the correction and stop it from happening in the future?
I've created a collage using Microsoft Picture It! by cutting images out of photographs and layering them. Can I open this file in Photoshop Elements and be able to move the layered images around separately?
View 1 Replies View RelatedPhotoshop does a lot " *. TMP" files when the program is started up. These temp files, I would have moved to another location.How can I do it?
I am aware that it is possible to define which file "Photoshop Temp11309645056" to be created and how I place it at his own request, but it is not these files I ask for positioning.
In Transform controls I have write exact distance X: 1240.00 pixels (1. Picture)When I click ok, the object remains in its previous location by the guide .1240 .50 pixels (2. Picture). URL....
View 6 Replies View RelatedThe Move tool - is there a way to turn off the location details as the tool moves around?
View 1 Replies View RelatedI'm in the process of moving 100+ dwg files physically, but cannot figure out how to update the drawing locations w/o recreating a Pre-Existing fully populated (names, drawing numbers, etc.) SheetSet. Here's what I want to do:
Move dwg files from one location to another & update the new physical location (Expected/Found/Relative/Full/UNC Path) in a copy of an existing dst.
I've tried moving the files, then updating the Expected Path from within the SSM, but this works on a file to file basis, and takes a long time to perform on a 100+ drawing SheetSet. I've tried using SSMPropEditor, but for some reason, the changes do not stick. The only way that I've found to accomplish this is to use the Archive function (as a folder instead of a ZIP file) from within SSM, but there has to be an easier way to do this...
BTW: I'm using ACAD 2010 on a Core i5 XP machine.
I imported them without moving them. So they're in the catalog.How do I transfer them to the drive which contains the entire catalog. (I should have hit "move" right?)
View 2 Replies View RelatedCan I pick a 3D sketch and move the whole thing closer to 0,0,0 ? It is currently sitting around 5km,10km,2km from zero.
This makes everything very chunky, and very difficult to visualize anything correctly.
This was generated from a site survey, which was work in progress, it has now all been finalised, but I don't want to loose a weeks work by starting again. (Using AutoCAD to move the points to Zero)
I have some blocks with a point connected to them, the point is free movable, moving the point does not move the block, but moving the block does also move the point. each block has 1 point connected to it.
what i want is to move the point of the blocks i select to the same location. (without moving the blocks themselves)
I am using autocad 2011 (tried to upload the block in question but doesn't seem to be working)
I'm following a tutorial which involves augmenting an existing engineering drawing. Part of the tutorial involves using the MOVE command.
I've been asked to move a facing brick to a new location, however when entering the co-ordinates the brick moves to a completely wrong position.
Here are the steps I'm going through:
Click Move command;
Highlight brick;
click enter;
Enter first co-ordinate;
Comma,
Enter second co-ordinate;
Then Enter.
However, the image them moves to the wrong area.
was trying to move a photo to another location and I clicked on something and it asked if I wanted to create a new catalog. I said yes. Now none of my photos are appearing in my lightroom.
View 1 Replies View RelatedI have just installed lightroom 5 and it has put a file on my desktop which I do not want.
Can I delete/move the file to a different location?
I have 'User Order' sorting selected in a catalog of about 25,000 images and I want to move thumbnails around to specific locations in the grid view. Of course, I can select and drag them but I'm wondering if Lightroom has something like a move-to-new-location function according to which I can select photos to move, select the new grid position, and move the photos right to the new location. Phase One's Media Pro has this function but I'm not seeing it in Lightroom.
View 1 Replies View RelatedI've been geo tagging my RAW images before import. I copy them from the memory card to a temporary folder, geotag, then import, asking that images be moved to the "negatives" folder (organized by quarter). Things usually work, but several times recently I've been getting the subject message (with "xx" indicating a number of files). These images enumerated and named in the message are in fact moved, but are not imported.
View 8 Replies View RelatedAfter installing 5.3 to win 7 I noticed the catalogue file and folder have been placed on the desktop. Is there any way to move this to another location ?
View 1 Replies View RelatedWhen I want to move an object a certain distance from the original location, I go to long winded trouble of drawing a line and attaching it to say, for example, the centre of a circle. Then MOVE the circle, selecting the base line as the centre to the end of the LINE using OSNAP.
Is this how you Pro's do it, I'm guessing not.
During text creation, I can resize the text by changing font size, use move it around..Later on if I want to modify the text (resize, move to another location)...I don't know how..
View 2 Replies View RelatedI could not move or copy the hatch,it seems like locked. The dxf drawing was exported from CSC OrionR18.
View 5 Replies View RelatedWhat governs the location/distance from the object of the "object move symbol" when an item is selected? See attached image. I have selected the blue view reference text but the four way arrow/move symbol is way below it. This isn't using the move command. The arrows can be hard to find in a crowded sheet if it's very far from the item selected.
For reference I have added an image showing the location of the object move symbol for a text item. It's in the upper left corner of the text outline.
How do I move the catalog and previews in the default location to another drive?
View 2 Replies View RelatedOn Windows, it is possible to move the presets folder to a user-defined location?
By default the presets folder is located at C:UsersusernameAppDataRoamingAdobe. I use Lightroom on both a desktop and laptop and ideally I'd like to sync the presets between them by moving the presets folder to my SkyDrive folder. This way if I create a new preset on one device, it will automatically sync to the other device via SkyDrive.
Yes I realize I can store presets within the catalog folder and I could move my catalog to a SkyDrive folder which would technically accomplish my goal. However that would require sync'ing my entire catalog which I do not want to do; that would generate a lot of syncing traffic back and forth all the time. So I want my catalog and my presets in seperate locations, and I want to define where my presets are stored, which I haven't seen an option for.