In Transform controls I have write exact distance X: 1240.00 pixels (1. Picture)When I click ok, the object remains in its previous location by the guide .1240 .50 pixels (2. Picture). URL....
View 6 RepliesSometimes it works. Lately it rarely does. I have tried holding the command key and this does nothing. Why can I not move objects anymore.
View 3 Replies View RelatedWhen I want to move an object a certain distance from the original location, I go to long winded trouble of drawing a line and attaching it to say, for example, the centre of a circle. Then MOVE the circle, selecting the base line as the centre to the end of the LINE using OSNAP.
Is this how you Pro's do it, I'm guessing not.
What governs the location/distance from the object of the "object move symbol" when an item is selected? See attached image. I have selected the blue view reference text but the four way arrow/move symbol is way below it. This isn't using the move command. The arrows can be hard to find in a crowded sheet if it's very far from the item selected.
For reference I have added an image showing the location of the object move symbol for a text item. It's in the upper left corner of the text outline.
how can i copy paste objects from one place to another at their exact location? for example i cut a circle located near the left edge of a rectangle, i cut it and paste it into new layer but it gets pasted at a different location just like it happens in photoshop. i have to move it separately to the desired location.
View 10 Replies View RelatedIt's the part of project: I need read some named Blocks from a sample DWG and copy (clone) them (one at a time) to a new drawing.
There are 2 possible way to do it:
1. Database.Insert - it does allow you pass in location point but it takes whole DWG file not blocks inside the whole DWG;
2. Database.WblockCloneObjects - it takes blocks as parameter but it doesn't pass in with location information you want them there.
I have a two layer image:
layer 1. background
layer 2. A transparent vector layer with text
I have a second image, the same exact size and resolution as the first two layer image. I would like to paste layer 2 from the first image, into the same exact position on image 2. Every time I paste. it centers the text, whether it is just a ctrl-v, or a paste layer. I've even tried promoting the layer 2 in the first image then pasting as new layer into image two, with no luck. Everything I've done pastes layer 2 from image one, into the center of image 2.
I have PSP Photo X2
When you use Inventor command "Inspect" -->"Analyze Interference" command to analyze interference of two component, it not only gives you the interference volume, but also highlight the interference volume area to exactly identify it, as shown in the attached screen shot.
We want to implement this interference analyze using API. But the API sample (in AssemblyComponentDefinition.Analyze Interference Method) only gives the way to highlight the two interfering component occurrences and the interference volume, but there is no way to know where they exact interfere. So how to highlight the the interference location as in the inventor command? or does inventor exposes this function to API?
1) Is there any way in Photoshop to know the exact location of an existing guide like you can easily do in Illustrator and Indesign by watching the info box?
2) Besides that, can i move a previous guide to an exact parameter like i do in Illustrator and Indesign? those are very useful tips to the workflow.
Maybe there is a plugin to do it more efficiently. Nowdays, i have to always Create New Guide. If i like the New Guide 20 px from another guide and have to always remember the previous location or do the math...it too much time consuming. It would be great to have a box where i could put the value and move guides around like Illustrator.
Is there a way to change the selection position and size by entering the numbers exactly? I find it difficult to make pixel perfect movements and it is tiresome to use the keyboard arrows to do this.
When something is selected, the position and size appear in the bottom left corner. Perhaps clicking on this could bring up a window that would let the user enter exact values.
After using autocad for a while, I got some questions i'd like to ask.
1) In my line of work, I have to label the items I draw in every CAD file, multileader is a nice tool to have but how do I keep the styles I make so that it "transfers" over to a new CAD file?
I have to keep making a new style everytime I create a new drawing. I would like for the default style to stay after I edit it.
2) Is there a way or command that lets me scale an object to exact dimensions? For example, I have a 800 by 750 table in my block library, the size I need is 950 by 820, normally I would have to explode it then stretch it manually on the x and y axis, is there a way to scale it up to 950 by 820 through a command?
3) I don't know what I hit, but I can't seem to select multiple objects just by clicking on them anymore, I now have to hold down the SHIFT key. How do I revert this?
Photoshop does a lot " *. TMP" files when the program is started up. These temp files, I would have moved to another location.How can I do it?
I am aware that it is possible to define which file "Photoshop Temp11309645056" to be created and how I place it at his own request, but it is not these files I ask for positioning.
I have a PSE10 photo catalog and video catalog on my Win'7 64-bit PC. The catalog files are on my C drive (default location) and the media files are on a different internal "D" drive.
Each catalog currently resides in its own folder in the default location on C drive, and each catalog file is named "catalog.pse10db". It is curious that each file is identically named; I didn't do that, PSE did.
I want to move the photo catalog and video catalog to the internal "D" drive so that when I backup the D drive, the catalogs and media files are all backed up together.
How do I move my catalogs from the default location to a different location? I have read the "Backup and Restore Catalogs to New computer" info and think it may apply here, but I want to be sure before I try anything.
PSE11 on Win7. I have an album of images. Those images exist in a number of different folders. I would like to 'Move' them all to a new location. So all of the images would now be in the same folder.
View 4 Replies View RelatedI got HP Envy with installed PSE 9.
The catlog for PSE was located on the same drive as a programs and even I have almost empty data drive I cannot install any more programs because there is not enough space on the drive for the programs.
Questions:
1. How I can move Catalog to another drive?
2. How I can configure from the start or re-configure PSE to have Catalog in another location/drive?
Can i scale a 2D object to an exact length and width that i need to fit into a space?
Ive been reading around online and they say use scale/ref, however i noticed by giving the ref length, it does lengthen the object to the ref length, but the height's off!
Is there a way to find the exact area of an irregularly shaped object? If there is, does the procedure work for compound paths (objects with holes in them)?
View 3 Replies View RelatedThe Move tool - is there a way to turn off the location details as the tool moves around?
View 1 Replies View RelatedI'm tring to reorganize after a computer crash. How do I move multiple folders to a new location?
View 1 Replies View RelatedIs there any way to locate exact center of a circle in after effects? I made a perfect circle in photo editing program and since layer's boundaries corresponded to circle's edges, i thought that anchor point in after effects will be exactly at the center. but it's not the case - the anchor point is at the center of a composition!
I imported the circle .psd layer together with other layers as a composition, does this have any importance? As i said,the circle layer boundaries corresond with circles edges, not with canvas' edges in my photo editing program. But whe i solo the circle layer, i see that the anchor point is at the center of a composition, not the layer.
So now i have to place anchor point at the center manualy, and it's pretty difficult to do it perfectly. when i rotate the circle, it wobbles and wobbles.
What happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedI have a fairly large catalog with about 20 album categories, each with between 5 and 15 albums, totalling about 20,000 photos, all currently residing on my laptop. I need to move everything to a networked drive but can't find how in the Elements help system.
View 3 Replies View RelatedWhen I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database?
View 2 Replies View RelatedI'm in the process of moving 100+ dwg files physically, but cannot figure out how to update the drawing locations w/o recreating a Pre-Existing fully populated (names, drawing numbers, etc.) SheetSet. Here's what I want to do:
Move dwg files from one location to another & update the new physical location (Expected/Found/Relative/Full/UNC Path) in a copy of an existing dst.
I've tried moving the files, then updating the Expected Path from within the SSM, but this works on a file to file basis, and takes a long time to perform on a 100+ drawing SheetSet. I've tried using SSMPropEditor, but for some reason, the changes do not stick. The only way that I've found to accomplish this is to use the Archive function (as a folder instead of a ZIP file) from within SSM, but there has to be an easier way to do this...
BTW: I'm using ACAD 2010 on a Core i5 XP machine.
I imported them without moving them. So they're in the catalog.How do I transfer them to the drive which contains the entire catalog. (I should have hit "move" right?)
View 2 Replies View RelatedCan I pick a 3D sketch and move the whole thing closer to 0,0,0 ? It is currently sitting around 5km,10km,2km from zero.
This makes everything very chunky, and very difficult to visualize anything correctly.
This was generated from a site survey, which was work in progress, it has now all been finalised, but I don't want to loose a weeks work by starting again. (Using AutoCAD to move the points to Zero)
I have some blocks with a point connected to them, the point is free movable, moving the point does not move the block, but moving the block does also move the point. each block has 1 point connected to it.
what i want is to move the point of the blocks i select to the same location. (without moving the blocks themselves)
I am using autocad 2011 (tried to upload the block in question but doesn't seem to be working)
I'm following a tutorial which involves augmenting an existing engineering drawing. Part of the tutorial involves using the MOVE command.
I've been asked to move a facing brick to a new location, however when entering the co-ordinates the brick moves to a completely wrong position.
Here are the steps I'm going through:
Click Move command;
Highlight brick;
click enter;
Enter first co-ordinate;
Comma,
Enter second co-ordinate;
Then Enter.
However, the image them moves to the wrong area.
was trying to move a photo to another location and I clicked on something and it asked if I wanted to create a new catalog. I said yes. Now none of my photos are appearing in my lightroom.
View 1 Replies View RelatedI have just installed lightroom 5 and it has put a file on my desktop which I do not want.
Can I delete/move the file to a different location?
I have 'User Order' sorting selected in a catalog of about 25,000 images and I want to move thumbnails around to specific locations in the grid view. Of course, I can select and drag them but I'm wondering if Lightroom has something like a move-to-new-location function according to which I can select photos to move, select the new grid position, and move the photos right to the new location. Phase One's Media Pro has this function but I'm not seeing it in Lightroom.
View 1 Replies View Related