AutoCAD Civil 3D :: Modify Assembly - Some Of Existing Subassemblies Move
Oct 24, 2012
I've got several assemblys built for a road project. the problem is whenever i modify an assembly by adding a subassemby, some of the existing subassemblies move. they stay attached to the assembly but they disconnect from the part they were attached to. i can move them back so the assembly looks correct but when i rebuild the corridor chances are they show up wrong. i've tried 'move to' and just grabbing and snapping. i can eventually get it attached but not without trial and error. i'm running c3d2012.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 4 Replies
ADVERTISEMENT
Jul 24, 2013
Have a question regarding multiple daylight subassemblies, don't know if it is possible. So I have an assembly with a trench SA in cut condition and a project to surface in fill condition, I built the corridor with this assembly and most of things look fine. However, there is a short stretch (in cut condition) of the corridor that I would like to modify such that a trench is not provided. I know I can create a new assembly with my desire condition, then create a new region and drop that assembly there, but I am wondering if there any other way to achieve my goal without another assembly.
View 8 Replies
View Related
Jun 7, 2012
I'm trying to create an assembly that consists of two curbs sub-assemblies that are tied to independent alignments with a pavement section in between them. I have been successful in actually creating an assembly with the two curb sections, but I cannot figure out how to define a line or pavement section that will connect one gutter to the other.
I have one curb tied to the main baseline and the other tied to an offset. I have assigned horizontal alignments and profiles to the baseline and the offset. The curbs actually place where I want them when viewed with the section editor. I had thought that I could use the LinkToMarkedPoint subassembly and simply attach it to the gutter of one curb and to a marked point on the gutter of the other curb, but I can't get it to actually work.
Again, the curb alignment and profiles are completely in independent one another, and I need a way to define a pavement section (or just a surface) between the two gutters.
View 2 Replies
View Related
Dec 9, 2011
Is there an easy way to copy an assembly that has sub-assemblies within it. Make changes to that assembly and some of its sub-assemblies and have no effect on the original.
View 2 Replies
View Related
Aug 23, 2012
Is there a way to move the station on an existing alignment? For example, I have an alignment created and want to move station 10+00 so it represents a different point on my alignemnt.
View 1 Replies
View Related
Dec 15, 2013
I don't undrstand why my assembly line increased after the existing surface in cut and fill condition, it should be stop at the existing surface. due to this problem my cut and fill quantities is not coming accurate. I'm attaching the screens shot of section. I'm using civil 3d 2009 32 bit software.
View 4 Replies
View Related
Sep 25, 2011
The model I have been working on has been trying to change it's colour all day. Finally I had a crash 'graphics adapter stopped working' and when I re-opened the model it had gone all blue. The top level assembly is all blue but the subassemblies are the proper colours when you open them.
I'm updating my graphics driver which should maybe stop the problem re-ocurring but in the meantime I need to get my top level assembly to display as per the colours in the sub assemblies.
View 1 Replies
View Related
Apr 10, 2013
I need to create an assembly that will give me the volume of a new shoulder along an existing road, as show in this picture.
I can easily make an alignment along my edge of pavement, and match the existing elevations, but I need to hold the cross slope constant AND the shoulder slope constant, and have the bottom of the shoulder slope to a target 2 feet off of my ROW.
View 1 Replies
View Related
Nov 8, 2013
I've got a machine designed that has a couple hundred parts - originally built as one main assembly (with a number of weldment subassmblies). The problem is that the BOM is too large to feasibly have on the drawing and still show assembly detail. I'm trying to avoid a multi-sheet configuration.
So I've grouped certain items and demoted into subassemblies. The problem is that all the subassemblies are attached to a main frame- and I'd like to show this frame in each of the subassemblies as a reference. Is there a way to add a "phantom" copy of the framework to each of the subassemblies to that it can be seen? (and the assembler can see how the subassembly is mounted on the frame) Otherwise all these parts are just floating in space on the subassembly (and constraints are lost on the subs).
I'd like to keep the frame on the top assembly, as it may be customized for future machines, while using the same subassemblies.
2014 Product Design Suite
W7Pro-64
Intel Xeon E5-1620 @ 3.60 GHz 16GB RAM
Dual 1GB NVIDIA Quadro K600 graphics
View 9 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Oct 19, 2013
I want to insert from content center a screw and modify it, prolong it's thread and more.How can i do that?
In a part file i cannot insert parts from content center, should i make an assembly? and then?
View 3 Replies
View Related
Jun 4, 2013
Can I modify an existing viewport in a macro or in the command line?
Using a macro, I want to modify (specifically delete) the viewport from a layout tab after chspace from model space.
I have LT so no LISP. qselect works but cannot be put into a macro.
If I "select all" on a layout tab in paperspace ACAD says 1 of the objects selected is the viewport so I know autocad recognizes the viewport as a different kind of object.
View 6 Replies
View Related
Sep 5, 2012
I need the same funcionality as in code below, but without using "command".
The main idea is alowed user to modify Existing Selection Set.
(defun gt:ss->lst (a:ss / i lst ) ;_ / (setq i 0) (if a:ss (progn (repeat (sslength a:ss) (setq lst (cons (ssname a:ss i) lst) i (1+ i) ) ;_ setq ) ;_ repeat (reverse lst) ) ;_ progn ) ;_ if) ;_ defun gt:ss->lst(defun gt:ss_modify (a:en-lst / ) ;_ / ;;create Selection set (setq ss2 (ssadd)) (foreach f:en a:en-lst (ssadd f:en ss2) ) ;_ foreach ;;Run command and fill with initial content (command "_select" ss2) ;;Alow the user to modify the contents (while (/= (getvar "cmdnames") "") (command pause) ) ;_ while ;;get back the list of enames from modified selection set (setq ss3 (ssget "_P")) (setq ss3-lst (gt:ss->lst ss3))) ;_ defun gt:ss_modify(defun tst:gt:ss_modify ( / ) ;_ / (gt:ss_modify (gt:ss->lst (ssget)))) ;_ defum tst:gt:ss_modify
View 8 Replies
View Related
May 2, 2013
Is there a way to modify the existing Parametric Parameters that are in the Parameters Manager using LISP?
View 2 Replies
View Related
Dec 8, 2011
how Inventor Materials are used in your companies, what is your customization level and usage level.Do you use Inventor Materials as they come out of the box ?Do you create your own materials?
Do you modify the properties of existing Inventor materials without changing the material name?Do you show material names on 2D drawings (in parts list etc)?
View 7 Replies
View Related
Jun 16, 2011
I have several existing block definitions and need to change the insertion point. Also, when creating a new block in the Block Editor, how do I define the insertion point?
View 9 Replies
View Related
Jul 11, 2013
How do I specify the code set to be used on subassemblies when creating an intersection? I want to specify this in a command setting so that the intersection is built correctly without me having to edit feature lines in the corridor properties for th intersection.
View 9 Replies
View Related
May 15, 2013
how subassemblies work, vis a vis pkt files & all the files created in the ProgramData folder (.atc, .cfg, .dll, .emd, .pvd, .xaml, pdb)? Here's our situation:
A user will make a subassembly, save it locally. The subassembly is used in a corridor. A different user tries to access this file: the subassembly is there (shows in plan), but the parameters are empty and that part of the assembly doesn't run. The subassembly doesn't appear in the Tool Pallet. You do get a .NET error when trying to look at the subassembly.
How we fix this is to open up the C:ProgramDataAutodeskC3D 2013enuImported Tools folder on the computer which made the subassembly, copy everything, and paste it into the other computer's C:ProgramDataAutodeskC3D 2013enuImported Tools folder. How/why doesn't the drawing which has the subassembly in it just work?? And moving forward, how can we share drawings with custom subassemblies? Remap everyone's .net search path to a network drive?
View 4 Replies
View Related
Jun 11, 2013
I think tool palette with vertical tabs are a lot of unconfortable...
Is there any way to have or to create a "mega-subassemblies-ribbon" ?
View 3 Replies
View Related
Jul 23, 2013
issue with my Corridor. It involves the intersection of a main road alignment and a secondary road. Thing is my main road has a 6' shoulder whereas my secondary road doesn't have a shoulder at all. I used the Intersection Wizard to create the Intersection, but the two templates don't align. Without the shoulder the ditches don't line up. I tried drawing a polyline between the two ditches and targeting it and that worked, but then realized that going from 6' shoulder to no shoulder wasn't working either so when I tried to target a polyline from the 6' shoulder to the edge of pavement all kind of stuff happened that didn't make sense to me.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
View 9 Replies
View Related
Nov 15, 2013
I have a ditch and a road that need to follow separate profiles but be integrated with each other as a single corridor and the ditch's 3:1 slope needs to meet up with the road's 2% slope. Is it possible to have the two subassemblies target each other without having to create a dummy surface or a feature line for targeting to?
View 6 Replies
View Related
Dec 15, 2011
I was wondering if there is a way to add labels to assemblies/subassemblies. When I use generic subassemblies or subassemblies I have created in SAC there aren't labels such as slope or offset/elevation. At this point I am stuck creating labels in each of my section views and this can become very tedious.
I am using C3D 2011
View 2 Replies
View Related
Mar 11, 2013
When I attempt to import a PKT file from SAC, C3D crashes. This includes custom ones that I created as well as samples from the ADESK site.
View 9 Replies
View Related
Nov 7, 2012
I've drawn a hollow ellipse shape (shape layer). I would like to remove the bottom half of the ellipse shape so that I am left with a parabola shape.
I've tried creating two shape layers and combining them in such a way as to subtract out the bottom half of the original ellipse but I am obviously doing it wrong.
View 10 Replies
View Related
Feb 7, 2013
how to select and modify an EXISTING rectangle (not create a new one)? I drew a rectangle with rounded corners, and now I would like to modify the radius of the corners.
I've tried using the Rectangle Select tool to reselect the existing rectangle, but Gimp only lets me create a new rectangle.
View 4 Replies
View Related
Jul 31, 2013
In AutoCAD LT 2013, the Modify box on the ribbon, I regularly use about four buttons in the main box on the ribbon and I use only the Lengthen button in the drop down box. Is there a way to trade the Lengthen button in the drop down box for one of the seldom used buttons in the main box on the ribbon?
View 3 Replies
View Related
Mar 11, 2013
I understand the procedure for IMPORTING a pkt file from SAC into C3D. But is there a way to go the other direction?I want to use certain SAs that come with OOB C3D -- but I want to customize them.
Of course I can recreate them -- but I'd rather not start from scratch (ESPECIALLY where it comes to the codes).
View 3 Replies
View Related
Sep 4, 2012
I'm doing sections for a new sidewalk, but they have vertical lines at the connection points (see attached). How to turn them off?
View 3 Replies
View Related
Aug 14, 2012
We are just starting with Civil 3D 2012. We are doing a pilot project, and the engineer wanted to make a custom curb subassembly matching the exact dimensions (angle from bottom of curb to top of curb) as the county detail. I didn't think that was necessary and thought we could use one of the generic subassemblies. usually use the basic or generic subassemblies or do you create your own to match specific municipalities' details exactly?
Do you find that the parts that come with Civil 3D are usually sufficient for design or do you make a lot of custom parts?
View 6 Replies
View Related
Jul 9, 2013
I need to create a corridor that has this section. So I'm using this assembly:
on which I put 3 conditional fill subassemblies on point A, one for fill conditions of more than 2 m that would daylight at 2:1 until it reaches 2 m down and then daylights at 1:3 until it reaches the EG. Then I have another for fill conditions of less than 2 m that only daylights at 2:1 to the EG, and the last one is for all cut conditions.
As expected I have the following problem in some stations that have fill conditions on A of less than 2 m but more than 2 m on B:
Is there any way I can make B the comparison point without having the following problem on cut conditions?
Or that I could create an assembly with the condition that when I have a fill of more than 2 m on point B it daylights, from point B, at 1:3; but when B would be on cut conditions it daylights from A?
View 7 Replies
View Related
Jul 26, 2012
I need to modify all the ipt in an assembly, but I don't kow how many ipt I have, and I don't know the name. Can I have with iLogic the list of all the ipt used in the assembly ? For example, to modify the Part Number in all the components.
The code should be like this :
For All component in Assembly
...
...
Next component
View 3 Replies
View Related
