I have several existing block definitions and need to change the insertion point. Also, when creating a new block in the Block Editor, how do I define the insertion point?
View 9 RepliesI create a block where coordinate 0,0 is my base/insertion point (which is established in an orientation that is to the lower-left of my blocks line work). In a new drawing I insert that block and specify coordinate 0,0 as my insert point. Instead of my insertion point being in the lower left it is in the upper right. I run into this in new version and old version drawings.
View 2 Replies View RelatedMy boss gave me a drawing to make some changes on a particular block; however, every time I try to insert the block, it always insert the block in Paper Space even though I'm in Model Space.
Is there any way to change that insertion point? I want to insert the block in Model not in PS...
How do I change the insertion point of a text using "vla-put" ? I've tried using :
(vla-put-InsertionPoint en a)) with a = (4455.94 428.576 0.0)
and I get the following error:
lisp value has no coercion to VARIANT with this type: (4455.94 428.576 0.0)
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
Presently if I insert a block into my drawing - and a block with the same name exists - the newly inserted block takes on the definition which exists in the receiving drawing . How do I reverse this i.e. I want to be able to overwrite the existing block definition by inserting the new wblock version.
View 9 Replies View RelatedI have drawn some doors and saved them as blocks. Whenever I insert one or another, the door itself is far away from the insertion point. How can I modify this?
View 9 Replies View RelatedWhen I select a block, all points contained in the block are shown. How do I turn this off? I want to select the block and have only the insertion point showing.
View 1 Replies View Relatedhow I can quickly add points at the insertion point of a block? I have over 1400 and would like to find the quickest way to do it.
View 7 Replies View RelatedHow can I find a block with a specific name and get what the coordinates are? What we have is our Bill of Material is attributed blocks. I am attempting to change the first one. Well all of the lines that list the parts are seperate blocks with the same name. Now the Top Line of the Bill of Material is a different named block. If I can find the coordinates of this block I can then select the first line to do what I need to.
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
I have insert blocks in my dwg. It is the circle. While creating the block, i was just pick the point into the circle not exactly at the centre.
Now i want change the insertion point of the block at centre of the circle without moving the objects from the dwg.
Beacuse i had use block editor to change the insertion point. But after changing, all blocks were moved from the original position.
My multileader style uses a block as a content. How can I find world coordinates of insertion point of block entity within multileaders?
View 3 Replies View RelatedWe have several AutoCAD drawings with hundreds of block references inserted with imprecise coordinates. Now we need to dimension all elements and need to correct these positions.
I am searching for a routine to round these positions up or down towards a 5mm precision so I don't have to manually move every single block element.
Is there any way to automate the task or do you know any workaround (like inserting the elements into a drawing with poorer unit precision settings)?
I've have code to test if the insertion point is within a closed polygon. But prior to testing the insertion point I use ssget to trim the selection set initially..
(ssget "CW" Pnt_List (list (cons 0 "INSERT")(cons 2 BlockName)))
this requires that the whole Crossing Polygon is visible, so I do a zoom first. This requires time. Is there a way I can do this that does not require the zoom?
AutoCad 2012 SP1 / Windows 7 64 bit
Sometimes I have MLeader text without Mleaders (ie, I remove the leader arm using MLEADEREDIT). Then when I go to edit this 'floating note', the base point moves:
In this screenshot, I've just finished editing the text. Note that I added in the diagonal line at the current insertion point of the Mleader text (top right):
Then, after I click outside the Mleader box, the text moves:
THis happens only with right-aligned MLeaders, and keeps happening, ie if I edit this text again and close it again, it will move again.
We are having an issue while inserting blocks from the tool palette. Inserting a block from the tool palette takes about 5 seconds per block. Pick a block, wait 5 seconds, pick insertion point. Last week it took maybe 1 second. It doesn't sound like much, but we use alot of blocks everyday, and waiting 5 seconds everytime gets annoying. Especially when it used to be almost instantanious. We also have our blocks in our template. The template is on the server. If you type insert, and insert the block that way, it loads fast, like it used to using the tool palette.
Most of the blocks are simple text or shapes. None are dynamic. We also have some hatches in there, that are unaffected by the delay. They insert quickly.
Another thing has changed. The time it takes to change to a different tab on the palette has grown. A tab with about 10 blocks used to take about 6 seconds to load, now takes a good 30 seconds. And a tab with about 30 blocks that used to take about 12 seconds, now takes about a minute and a half! Once the tool palette and each tab has been opened for the first time, say first thing in the morning when cad is first opened, the delay is gone. They switch betweeen tabs with no delays.
The only thing that I know of that has changed that coincides with this is last week we made a few changes to the template. We removed a few sheets that we no longer use. Could this have done something? The blocks are still in the template. We have 3 pc's that are affected in the same way, at the same time.
I've tried a few things to remedy this. I am by no means a cad guru. I created a .dwg with all the blocks in it. Made another tab on the tool palette using the blocks from the .dwg. Still the same delay. I tried creating a new palette using the design center and the blocks .dwg I made, but cad locks up on me and I have to restart cad. I tried that twice, same result.
We are running AutoCAD Civil 3D 2010 on Vista Business 64bit.
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
I want to convert existing lighting blocks with attributes to a new dynamic block. I created a few visibility states but when i insert the block I can't move the attribute text around. I don't have to redefine the attributes within the block editor to make this work. What is the best way to deal with existing blocks with attributes?
View 4 Replies View RelatedI have a block that has been already established. i added another line of attribute. how do i make the new attribute associate with the 'move' parameter that has been set with the old attributes?
All this is created in block editor.
I'm trying to change block the definition of an block reference.
I did something like this:
blockreference.BlockTableRecord = newBlock.ObjectId;
In most cases this works well. However I found a case that it not work as well. When I try to change the definition from a new block that I have created in my test DWG, it disappears from the model.
Create a routine that looks for a block based on a portion of that block name, using a specified path or search path.
For example, block to search for is BLOCKABC123, so if someone inputs ABC or 123 as a block name, it will locate that block within that folder and inserts it into the drawing at a user specified location.
Ideally, if there is a check in that if it finds more than one match, then perhaps it flags or prompts you to choose 1, 2, or 3 option which block to use. But I can live without this special function if it requires too much time to code.
I have a drawing where I have placed all of my natural gas piping. I have all of the annotative blocks set to 3/32"=1'-0" and 1/32"=1'-0" scales. They are both correctly displayed in this drawing.
When I xref this drawing into another about half of the 1/32" blocks show up correctly. The other half are shifted to the right off of the plan. All of the 3/32" blocks show up correctly.
When using grips to move a multileader source block with the attachment defined as insertion point (the insertion point being the center of the source block) the grip point moves off of the block if the move is to the left of the multileaders end point. When the drawing is reopened the blocks move from where they were placed to the off insertion point grips. A screen shots jpg and a drawing file are attached
View 2 Replies View RelatedI am working on my first real Revit project. i need to modify a windows family and in particular i want to change the axis of insertion of the window in the wall. I mean... my window should be placed on the outer edge of my wall. i try to unlock the dimensions that define its position and then i lock the dimension in the new position; the window seems to be ok but only in the RFA file. When i imported it in my project file, the windows moves in the wrong way in my real wall.
View 4 Replies View Relatedis it possible to create a block so that the base point is the only snap point on the block?
In other words supose I have a block of a simple rectangle with the base point in the center.
If I try to snap to the block, I will be able to snap to all the corners, but not the base point. I know that i can put a point at the base point, but can I turn off the snap to the corners (just for the block) in other words, have an object that is unsnapable to without turning the snap mode off.
I have modeless dialog. On dialog I have button on which user clicks, when he wants to pick insertion point. Problem is when I exit dialog the command line is still in command GetPoint (doesn't show usual Command.My code at the moment is:
// this.Visible = false;
AppServ.Document adoc = AppServ.Application.DocumentManager.MdiActiveDocument;
AppServ.DocumentLock dl = adoc.LockDocument();
Editor ed = adoc.Editor;
using (ed.StartUserInteraction(this))
{
[code]....
How do I get an onscreen point after/ during a VB.net dialog box is launched (as example like with Hatch add pick points. I would like to create button for this in a vb.net dialog box?
View 4 Replies View RelatedI have created a set of standard panel cutouts for connectors as ifeatures.
they work good however i created them all from one file and they were in various locations in the original file.
when i insert the objects i am unable to place them by their centers and have to re-position afterward.
Is there a way to edit the ifeature and modify the location of the insertion point?
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
I have a VBA to insert a block I ask the user for an insertion point GETPOINT. Then I allow the user to select an angle. GETANGLE starting with the insertion point. If the user picks a point or enters a number there is no problem.
However if the user hits enter it crashes saying invalid input. What I want to happen that if enter happens it accepts it as an angle of 0.
I want to insert from content center a screw and modify it, prolong it's thread and more.How can i do that?
In a part file i cannot insert parts from content center, should i make an assembly? and then?
I've been going through some examples on [URL] to create polylines and i've managed to make some code run. One thing that I can't seem to find information on though, is how to use the default AutoCAD command line options in my code. For instance, I would like to be able to prompt the user whether they would like to snap the polyline to an insertion point, everytime they create a new verticie.
Below is some example code from the site that i'm working from:
namespace MyPlineApp
{
public class MyPlineCmds
[Code].....