AutoCAD 2010 :: MLeader Text Moves Insertion Point After Editing?
Nov 28, 2011
AutoCad 2012 SP1 / Windows 7 64 bit
Sometimes I have MLeader text without Mleaders (ie, I remove the leader arm using MLEADEREDIT). Then when I go to edit this 'floating note', the base point moves:
In this screenshot, I've just finished editing the text. Note that I added in the diagonal line at the current insertion point of the Mleader text (top right):
Then, after I click outside the Mleader box, the text moves:
THis happens only with right-aligned MLeaders, and keeps happening, ie if I edit this text again and close it again, it will move again.
Is there a way to modify the text insertion point of multileaders using lisp? We have a problem with some of our multileaders getting a landing distance set to a negative value. My lisp routine will correct these to a default value, but then the text jumps a bit. If I could get the insertion point prior to changing the landing distance then I could restore that point after changing the landing distance.
;;-------------------------------------------------------------------------------------------------(defun c:zld (/ e th dogleg doglegllength sf ss c mlss mlcount) (setqss (ssget (ssget "X" (list (cons 0 "MULTILEADER"))))DWATxtHgt (getvar "userr1")sf 1dogleg (/ 3 32.0)th (if dwatxthgt dwatxthgt dogleg)c 0mlcount 0mlss (ssadd)) (IF ss (while (< c (sslength ss)) (setq e (vlax-ename->vla-object (ssname ss c)) c (1+ c) ) (= (vla-get-ObjectName e) "AcDbMLeader") (progn;;change the dogleglength if
I create a block where coordinate 0,0 is my base/insertion point (which is established in an orientation that is to the lower-left of my blocks line work). In a new drawing I insert that block and specify coordinate 0,0 as my insert point. Instead of my insertion point being in the lower left it is in the upper right. I run into this in new version and old version drawings.
When using grips to move a multileader source block with the attachment defined as insertion point (the insertion point being the center of the source block) the grip point moves off of the block if the move is to the left of the multileaders end point. When the drawing is reopened the blocks move from where they were placed to the off insertion point grips. A screen shots jpg and a drawing file are attached
My boss gave me a drawing to make some changes on a particular block; however, every time I try to insert the block, it always insert the block in Paper Space even though I'm in Model Space.
Is there any way to change that insertion point? I want to insert the block in Model not in PS...
I need to create a little application (Not the firt one in .NET but my first one for Autocad in C# .NET).
What do I need to do ?
User select texts on screen. => Making a Selection Set of those selected texts. DONE
For each select text is on screen another text (on another layer) with the same coordinates.
For each text in the first Selection Set, I try to create a second SelectionSet (filtered to select text only, named acPSResPCode) but that SelectionSet stay always null. If I make the SelectionSet without filter I select every lines in the crossing windows, but no text are selected.
Here's my code (PS : Code for AcadMp 2010)
[CommandMethod("SelectionPP")] public void SelectionPP() { //Récupère le document courant, sa base de données, et demarre une transaction Document acDoc = Application.DocumentManager.MdiActiveDocument; Database acCurDb = acDoc.Database; //Récupération de l'éditeur de la base de données courante Editor ed = acDoc.Editor; //Démarre une nouvelle transaction using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction()) { //Création [code].........
I have several existing block definitions and need to change the insertion point. Also, when creating a new block in the Block Editor, how do I define the insertion point?
In Autocad 2011, Mleader, is there a way to set the block size and the text size with the source block (square, cercle etc.. I would like to make it a specific size instead of measuring then scaling.
I have written code for the user to select a point on the curve.I need to trace the point along the curve at certain intervals.How do i calculate the direction in which the point moves along the path.Im not using the GetPointOnCurve asit doesnt suit my requirement.
I have modeless dialog. On dialog I have button on which user clicks, when he wants to pick insertion point. Problem is when I exit dialog the command line is still in command GetPoint (doesn't show usual Command.My code at the moment is:
// this.Visible = false; AppServ.Document adoc = AppServ.Application.DocumentManager.MdiActiveDocument; AppServ.DocumentLock dl = adoc.LockDocument(); Editor ed = adoc.Editor; using (ed.StartUserInteraction(this)) { [code]....
How do I get an onscreen point after/ during a VB.net dialog box is launched (as example like with Hatch add pick points. I would like to create button for this in a vb.net dialog box?
I have a VBA to insert a block I ask the user for an insertion point GETPOINT. Then I allow the user to select an angle. GETANGLE starting with the insertion point. If the user picks a point or enters a number there is no problem.
However if the user hits enter it crashes saying invalid input. What I want to happen that if enter happens it accepts it as an angle of 0.
I have drawn some doors and saved them as blocks. Whenever I insert one or another, the door itself is far away from the insertion point. How can I modify this?
I've been going through some examples on [URL] to create polylines and i've managed to make some code run. One thing that I can't seem to find information on though, is how to use the default AutoCAD command line options in my code. For instance, I would like to be able to prompt the user whether they would like to snap the polyline to an insertion point, everytime they create a new verticie.
Below is some example code from the site that i'm working from:
When editing multileader text, the insertion point changes. How do I stop this? I have several multileaders with their insertion points aligned together (left justified notes) but if I edit any text, the multileader jumps to a new position and is no longer aligned with the other notes.
Currently, I have the base or insertion point of some of my blocks in an undesirable spot and I would like to move it. When I insert a drawing or block I have difficulty in placement due to a poor choice in the drawing or block I am trying to insert.
I created a dynamic block with a polar stretch. I insert the block, then have to select the grip to rotate/stretch it. Can it be inserted and then rotated/stretched all in one action? The insertion point is at one of the line and the polar stretch grip is at the other end.
know if there is a command which joins GetEnttiy() and GetPoint() functions. At the moment I'm using both commands one after another. Result I want would be one command where you can choose entity or select insertion point.
I put mleader into a LISP routine and it is doing the text attached to it only in the command line instead of in the drawing is ther a way to put mleader into a LISP routine and have it do the same as when you just type in mleader?
I am trying to use a lisp that will turn on a background mask on selected mleaders. I found the attached lisp here [URL]. it works good except the mask border offset factor is set to 1.5. I need the offset to be 1.0. When I look thru the lisp code it says the default is 1.0 but can be changed.
how I can use the lisp and get mask offset factor to be 1.0?
I have a weird issue with Mleader landing lines.In AutoCAD 2012, I get only one arrow grip on mleader landing lines when I select an mleader (see image below) In AutoCAD 2010 - when I open the same exact drawing - I get TWO arrow grips when I select an mleader.
I have had an issue with AutoCAD 2012 that I cannot fix. AutoCAD 2010 did not do this.
Here is the problem: I start by directing your attention to the attached file "LEADER PROB1". As you can see, i have two MLEADER notations. one ("TOP LINE") is above the other ("MIDDLE LINE"). The left side of the text in both mleader notations align and the leader jets out from the left side as well. However, each leader has a different angle at the corner of the leader landing. If I wanted to make the "MIDDLE LINE" leader angel to match the "TOP LINE" Leader angle, i used to move nod where the landing bends and continues on to the leader (circled in red in my attached image).
However, when i move this node, I end up with the angles matching, BUT now the text is not aligned, see attached image "LEADER PROB2".
How can i fix this? Quick Leaders ("QLEADER") works just fine (in regards to landing extensions) but not MLEADERS. I would like to extend the mleader landing but keep the text where it is, I don't want the text portion to move.
How to change MTEXT to MLEADER? We often have texts on our drawing - mostly MTEXT and used line to the text.
Recently I started using MLEADER due to that it has added line to the text and looked more professional with consistent line setting out within the text.
The problem is that I don't seem to find a way of converting MTEXT to MLEADER. From the internet search, it seems that adding a LISP created by someone seems to do trick but I would prefer to do from the Autocad software so that all colleagues can use.
When i edit the sketched symbol "Work Stages", i copy the line which the the arrow points at, but with it goes the green insertion point, and i can't delete it.
How to create a sub-assembly with an insertion point parameter using Sub-assembly composer.
like this one below. I found this under the following sub-assembly. All I want is , when the user inserting the sub-assembly they may need to go on both the sides attached.
Example:
So the user should be able to select from the dropdown if the insertion point is 1 or 2. Before inserting.
When I select a block, all points contained in the block are shown. How do I turn this off? I want to select the block and have only the insertion point showing.
