Am I correct in assuming that if Surface Labels by One Point is chosen, the slope as shown is the maximum slope of the surface triangle where the point was chosen??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design) Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD 16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
How can I find a block with a specific name and get what the coordinates are? What we have is our Bill of Material is attributed blocks. I am attempting to change the first one. Well all of the lines that list the parts are seperate blocks with the same name. Now the Top Line of the Bill of Material is a different named block. If I can find the coordinates of this block I can then select the first line to do what I need to.
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
How to create a sub-assembly with an insertion point parameter using Sub-assembly composer.
like this one below. I found this under the following sub-assembly. All I want is , when the user inserting the sub-assembly they may need to go on both the sides attached.
Example:
So the user should be able to select from the dropdown if the insertion point is 1 or 2. Before inserting.
Is there a way to label the low point of a profile or alignment that doesn't have any vertical curves? We have an existing alignment and profile which is relatively flat, and we'd like to establish and label the low points for drainage improvements.
we are in a situation where we want a dynamic wall label. how can i make that happen if technically the top of wall and bottom of wall are at two different x and y points. ideally i would like have one label and list it this way by referencing surface elevations:
i've got a bunch of points that need a coordinate label. my drawing is on a state plane coordinate base but i want the point labels to be on an artificial coordinate base. i basically need to start in the corner of a parking lot at 0,0 and work my way out from there with the coordinates based on that 0,0. Is this a possibility?
Dell Studio XPS 9100 Intel Core i7 CPU 930 @ 2.8GHz 12GB Ram 64 bit C3D 2012 SP3.0
I'm using AutotCAD Civil 3D 2012 in the Civil 3D workspace, trying to create a point label style to show what I need it to show. I click on a point and select it's properties. Once on the properties tab I go down to the point label style box and clicked on the down arrow. A list of options then comes up and I selected the create/edit option. A small point label style box then appears and i choose the button directly next to the drop-down list and the label style composer box pops up. In this box I go to the layout tab and then go down to the contents box. I select the browse button next to the contents to select the contents. I select the contents I want but when I apply it every point has those contents and I need just that one point to have those contents.
when i create a point it does not display (label or point). if i create a point group with overrides for the point and label style the points display. the default point and label style are set to the same styles as the overrides.
I'm thinking that AutoCAD has no such feature, but I'll ask just to make sure.
What I am doing is mapping points which each have a simple point number label. (asbestos load buried in landfill in case you are curious) There are many points which have the same coordinates (up to 20 points sometimes). So, then I have to drag each label individually until all labels are visible.This take a ridiculous amount of time when you are talking about 1000+ points.
I have Civil3d2012 and have created a surface in one drawing and then referenced it to another. It appears to be working, but the contour labels will not work on the drawing where the surface is referenced. I have all the appropriate layers on.
I need to extract the XY location of a surface label. Specifically, I am trying to determine the coordinates of the first picked point in a two-point slope label. But in looking at the IAeccSurfaceSlopeLabel interface in the ActiveX documentation, I'm not seeing where this data is stored. Even for a simple surface spot elevation label (IAeccSurfaceElevationLabel) I don't see a property that stores the coordinates.
Is there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit NVIDIA Quadro 600 Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz 8 GB ram - Two 1TB raid
How can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker? I need the flowline to follow my profile elevations.
I would like to rotate my Cogo point label so that i will be able to see it from a set view or a different UCS. Example I would like to see the label in the "LEFT" view.
Imported points and I have a label style to label tree sizes automatically, but when there are many trees near each other labels start to overlap. So I will typically rotate the label style 180 degree or drag the label, but I am curious if its possible to have label always stay horizontal no matter what my rotation angle is.
Civil3D 2013 Windows 7, 64 bit Intel i7 2600 @ 3.40Ghz 16 GB RAM Nvidia Quadro 600
i have a building corner point label style that labels the corner of bldgs with the elev on top of an arrow and the full description of a bdlgc on bottom of arrow...rotated at 45 degrees....
i have 3 components...a block of an autocad leader i call an arrow that i just drew from left to rt on layer 0 and named the component arrow...then i have the elevation and the description
problem is that when i rotate label to move it out of way of obstructions it flips the elev on bottom and the desc on top!!
i have tried a number of combinations of anchor pts and changing the "flip anchor pts with text" to true/false under the general tab of the label style composer...
I have a large number of cogo points that I have set. I would like to move, as a group, the label portion only and leave the coordinate value as is. This would be a time saver as I am seeing that I am going to have to move every point individually. I used to be able to do this in LDD along with changing the rotation. I've tried locking the points and then moving them but the values change. Not too happy with the lack of control with the leader either.
I need to get a station and offset for a bunch of points and have it show up in the point label. i can't find reference text in the label style so i was wondering if there was a good workaround.
Dell Studio XPS 9100 Intel Core i7 CPU 930 @ 2.8GHz 12GB Ram 64 bit C3D 2012 SP3.0
I have been searching for a way to rotate surface spot elevation labels but have not been able to find a solution to do so. Has this feature been added to 2013 or 14? I do not want to use the point and label styles for my surface elevation, even though these can be rotated. I have several miles of roadway with many horizontal curves and would like the surface labels aligned with and along the centerline. I prefer not to update the spot elevations when the profile is revised.
C3D 2013 (latest updates), 2014 Infrastructure Design Suite
How to use the Surface Contour Label Group class in the .NET API.
My first guess was that I had to create an instance object of the class and name it, and then use a "Create" method (e.g., CreateMultipleAtInterval) from there, like this:
Dim labelgroup As SurfaceContourLabelGroup
labelgroup.CreateMultipleAtInterval(arguments)
However, this doesn't work, as Visual Studio told me "Warning: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated."
Point label styles do not scale properly in raster plots. Raster plots have long been my fix for making wipeouts and masks behave. Without the excellent fix raster plots have been, I'm sunk! All of my work depends upon raster plotting to maintain consistently correct output with absolutely no wipeout or masking errors. My point label styles all have a text height of 0.11" which is the plotted height according to the documentation. They are exactly the right height in all page setups with non-raster plot devices. But, when my page setup includes a raster device the text is scaled to just a speck. It should be 32 pixels high at the 288 pixels per inch I have specified but it is barely two or three pixels high both on my display and in my ploits.
The attachments show the wipeout/mask problem in 2012 DWF output and the rescaling of point labels in 2012 raster (TIFF) output. I am in critical need of a fix that does not involve special point label styles just for raster plots. Autodesk!? I already have to use a special pen tables for raster plots with pens sizes scaled for each dpi resolution I use but that has been settled for many years now.