AutoCAD Civil 3D :: How To Use Surface Contour Label Group Class
Nov 6, 2013
How to use the Surface Contour Label Group class in the .NET API.
My first guess was that I had to create an instance object of the class and name it, and then use a "Create" method (e.g., CreateMultipleAtInterval) from there, like this:
Dim labelgroup As SurfaceContourLabelGroup
labelgroup.CreateMultipleAtInterval(arguments)
However, this doesn't work, as Visual Studio told me "Warning: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated."
I tried just saying:
SurfaceContourLabelGroup.CreateMultipleAtInterval(arguments)
But that didn't seem to work either. How this class works and get it to add some contour labels to a drawing?
View 4 Replies
ADVERTISEMENT
Mar 2, 2012
I have Civil3d2012 and have created a surface in one drawing and then referenced it to another. It appears to be working, but the contour labels will not work on the drawing where the surface is referenced. I have all the appropriate layers on.
View 1 Replies
View Related
Jun 5, 2013
How to label all the contour at one go.
View 2 Replies
View Related
Mar 23, 2011
how does one go about truncating surface contour elevation labels so they only show up to the tens place on the left side of the decimal (i.e. 50.25 instead of 5150.25)? I tried changing the rounding option under the style edit to "truncate" but that did not appear to change anything...?
View 6 Replies
View Related
Feb 25, 2013
It must be the medication, but I just can't remember something I learned in the last couple weeks regarding contour label intervals. I've been using C3d 2013 for about a year now and had used LDD 2004 until the upgrade. I've become pretty comfortable with the styles based implementation now.
What exactly controls the numeric value shown in a contour label? I've got them looking fine on my site. I imported my styles and settings to a coworkers site but for the life of me I cannot remember what I had to change to get the contour labels to show increments of 1 foot (they were showing fractions of a foot)… Typing the word "fractions" triggered my recall. The problem and solution was in the drawing units.(Inches vs feet).
How much time I spent looking through the style settings in search of the one setting I was missing... both times! One of the best ways to push things from short term memory into long term memory is "Increased active practice".
One thing I learned this time: The style settings are not always the source of the problem. It could be something very basic. It may save time to check the basics first.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 3 Replies
View Related
May 31, 2013
I have been creating contour surface labels, which utilize a 3-point contour label line with grips to adjust, and this is my question:
when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches. i can manually fix this by shorting the line, but this seems very inefficient.
1. is there a setting to have the label only placed on the center grip of the three?
View 2 Replies
View Related
Dec 20, 2013
i am creating contours in civil 3d, exporttoautocad2010, and there is this white box under the contour label, i don't want this, i DO want it to trim the contour to show the text better but NOT the white box.
View 6 Replies
View Related
Jul 18, 2012
I have no option to select my contour label style in my drawing all of a sudden. See attached dialog. They do exist in the settings but no option is available.
View 9 Replies
View Related
Mar 9, 2012
How to label the contour lines this way? I wanted to label the contours as shown in screenshot 1, but couldn’t know how to do that.
Which option should I choose to label the contours this way?
View 7 Replies
View Related
Jul 15, 2013
I'm working in 2011. Just labeling some contours in a new drawing, using the 'Multiple' setting. I found I could only draw one tangent of Contour Label Line. If I continued, I could click but no labels were created and on finishing the command I could see that those clicks had been ignored. What gives?
I found that the labels were on the current layer, instead of the layer they're meant to use.I also realised that my current layer was locked (from the previous task).
if the current layer is locked, the contour labels ignore the layer setting that they are meant to use, and come in on the current layer instead. And you can only draw one tangent's worth of contour labels at a time before finishing the command and restarting.
Solution: make a different layer current or unlock your layer.
are contour labels generally created on the current layer and then moved to their proper layer?Is that why it hit a snag: it wasn't permitted to move the object to a different layer because the one it was on was locked?
View 3 Replies
View Related
Sep 19, 2013
In C3d2011 I cant seem to change my contour label style from STYLE A to STYLE B. Seems I used to right click and change it from there but that oprtions not available?
View 4 Replies
View Related
Nov 30, 2011
I cannot get my contour label to mask the contour line that it sits on. I have no problems creating contour labels for my surface (whether using single, multiple, or multiple at interval options). I have set my contour labeling defaults to not display the contour label line, as well as set Label Mask Type to Contour Line Only. Under contour label style under Layout>Border>Background Mask, this is set to True.
View 9 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Jun 17, 2013
As far as I know there is no way to add or remove vertices on contour label lines. Is this correct?
If so it's another one for my wish list.
Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]....
View 4 Replies
View Related
Apr 27, 2011
I have a drawing set to UTM83 Zone 14 Meters and my drawing units is set to meters also. I created my surface from my point cloud. When i do the contour extract feature (surface object extract), the contours elevation is in the wrong datum or elevation? The surface contour is 620 but the same extracted contour says 188.97? Curious why this happens. It seems to me that it is back calculate elevation or datum to a different coodinate system.
View 7 Replies
View Related
Jul 8, 2013
I just upgraded to Civil3D 2014 and Windows 8. When I create a TIN surface using a DEM file no contour lines are displayed. Points are processed and triangles are created and can be displayed but no contour lines. Contour line layers are set to display in the style file.
View 9 Replies
View Related
Feb 24, 2012
I have drawing giving to us for a senior design project. I'm trying to create a surface to so that I can analyze cut/fill. Not sure if what i'm doing is right or wrong, I've never used civil 3d. But i'm getting break-line errors whenever i'm trying to create the surface from the contour lines.
Heres a link i took of what i'm doing on youtube [URL]........
View 3 Replies
View Related
Mar 4, 2012
I am using Civil 3D 2011 and wondering how to create just one contour on an existing surface at a specific elevation. I need to show where floodwaters would get to at a specific elevation so that contour would be the easiest way if I can contour the surface with just 1 elevation. I don't want to have to create 0.1' contours all over the site and then remove all the extras.
View 8 Replies
View Related
Mar 29, 2012
So I have an existing grade surface and I am laying out a number of different site designs. I've got all my surfaces from those site designs on different layers each displayed in a different layout. I need to label existing contours on each layout in different places. I've setup additional contour label styles (two for each design, major, and minor) and layers (two for each design, major, and minor). However, when I add labels to my existing surface, they come in on the right layer, but whenever I freeze any of the many layers my contour labels are on, they all turn off. The only workaround I can figure is to make copies of my existing surface for each design option and label each independantly. However, this is inacceptable as far as data management goes, since my one file will be hundreds of megs with all those surfaces.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 8 Replies
View Related
Nov 26, 2013
I have 400 files each represent a tile of contour at 0.5m interval, if I xref all into one dwg it is extremely slow. These files have some 3d blocks which represent xyz and I made a .net program to open each file with "readdwgfile" method. However turned out that the points are not dense enough to generate the same accuracy contours as the 0.5m contours.
I am going home now to use my home computer and see if it can handle all these files xrefed and then bind and explode.
Worst case in make another program to extract only the contours and insert into a blank database. Always difficult when not given raw lidar point files.
Total size for these contour files combined is 327mb.
We have microstation capabilities not sure if it can put in the file in an easier way. I can work with the xrefed bogged down file. But is there a way to only export what's shown ? I have frozen the layers for all other objects from all the references.
I estimated total points from contours will be 20 million. Since each generate about 50000 points. Which is still workable. The computer i use in the office just make this more difficult. Slow cpu. Difficult day. Spent 7 hours programming and got it figured out but didn't solve the problem. I should have known better 20 points are not enough to generate that look in the 0.5m contours.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 6 Replies
View Related
Feb 11, 2013
I'm working on a topo survey and the contours are crossing each others (See attached pic) and what I did was edit the surface by adding points. I know that these points are fake, but how does this affect the terrain surface for design point of view? I did try swapping edge and deleting lines but makes it worse. Also as you can see in the pic, I don't see the added points like it did back C3D 2008.
View 5 Replies
View Related
Nov 7, 2013
How to start pit excavation on a contour surface ?
View 6 Replies
View Related
Apr 21, 2013
Which is better to do: contour smoothing or surface smoothing? I did a little test with a surface with no smoothing, a surface with contour smoothing set to medium, and a surface with surface smoothing. The results puzzled me. The contours in the surface with no smoothing matched the contours of the surface with surface smoothing. The profiile of the surface with no smoothing matched the profile of the surface with contour smoothing. Are these results typical? I was surprised that the contours of the surface with surface smoothing didn't look smoother. I was also surprised that the surface with no smoothing and the surface with contour smoothing generated the same profile.
View 3 Replies
View Related
Jul 28, 2011
I would like to create surface from contours and extract points (with value) from on it. I had contours in my drawing; each major and minor contours are single polyline with elevation (Z value).
If I create surface form CONTOUR, some polylines (major or minor) are not included in to surface. After the creation of surface, I tried to erase the existing contour lines (Polyline) from drawing but the surface will be disappearing.
If I create the surface from ''DRAWING OBJECTS'', I'm not able to select the polylines (attachment 01) .
View 9 Replies
View Related
Oct 24, 2013
I have this contour lines from dwg file (see attached) and I am trying to make a surface out of it. Initially i thought it is already a surface for C3D but i cant seem to follow tutorials. While browsing for solutions from the Internet, it seems it is not even a contour file that can be added in C3D. what is this file and how i can convert it into a surface in C3D?
View 5 Replies
View Related
Apr 29, 2012
In the Multi-Section Creation tool i couldn't find a way to edit or remove Grid Break Labels ,aslo after creation i could Edit it each indvidual Section but not allover all Sections ?
How i can Editit ? also how ican do soin creation And why do i feel that the 2012 is Different from 2010 ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 2 Replies
View Related
Jul 24, 2012
Is it possible to weed contour lines displayed in a surface based on the slope? I am having an issue plotting construction plans due to steep cut slopes and flat adjacent areas. I have several cuts ranging from 33%-50% adjacent to flat areas around 1%. Due to the drawing scale required by the client and the .2FT and 1FT contours required to detail the flat areas, my steep cuts appear as dark hatches due to the tight contour lines.
View 1 Replies
View Related
Mar 2, 2012
I created surfaces in Civil 3d 2011 for existing and proposed and I did a surface volume between them. Is it possible to create a specific contour in the volume surface that represents the fill volume elevation (daylight line I think)? My proposed surface is a flood water elevation and I need to define the boundary at that elevation.
View 3 Replies
View Related
Apr 7, 2012
So I've got a collection of the LabelGroupSubEntity in the ProfileDataBandLabelGroup. I need to replace some values inside them based on what Vertical Geometry Point they are labeling. Is there an easy way to determine what station value it is labeling?
View 2 Replies
View Related
Jun 20, 2012
Is there a way for Civil3D to create/generate/extract a contour of a specific elevation such as 105.53 from an existing surface?
View 4 Replies
View Related
Jul 13, 2012
I want to change my elevations color to green and the other one to yelow. I can't not find this option. I using 3D 2011.
View 1 Replies
View Related
