AutoCAD Civil 3D :: Contour Label Line
May 31, 2013
I have been creating contour surface labels, which utilize a 3-point contour label line with grips to adjust, and this is my question:
when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches. i can manually fix this by shorting the line, but this seems very inefficient.
1. is there a setting to have the label only placed on the center grip of the three?
View 2 Replies
ADVERTISEMENT
Jun 5, 2013
How to label all the contour at one go.
View 2 Replies
View Related
Mar 23, 2011
how does one go about truncating surface contour elevation labels so they only show up to the tens place on the left side of the decimal (i.e. 50.25 instead of 5150.25)? I tried changing the rounding option under the style edit to "truncate" but that did not appear to change anything...?
View 6 Replies
View Related
Feb 25, 2013
It must be the medication, but I just can't remember something I learned in the last couple weeks regarding contour label intervals. I've been using C3d 2013 for about a year now and had used LDD 2004 until the upgrade. I've become pretty comfortable with the styles based implementation now.
What exactly controls the numeric value shown in a contour label? I've got them looking fine on my site. I imported my styles and settings to a coworkers site but for the life of me I cannot remember what I had to change to get the contour labels to show increments of 1 foot (they were showing fractions of a foot)… Typing the word "fractions" triggered my recall. The problem and solution was in the drawing units.(Inches vs feet).
How much time I spent looking through the style settings in search of the one setting I was missing... both times! One of the best ways to push things from short term memory into long term memory is "Increased active practice".
One thing I learned this time: The style settings are not always the source of the problem. It could be something very basic. It may save time to check the basics first.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
View 3 Replies
View Related
Dec 20, 2013
i am creating contours in civil 3d, exporttoautocad2010, and there is this white box under the contour label, i don't want this, i DO want it to trim the contour to show the text better but NOT the white box.
View 6 Replies
View Related
Jul 18, 2012
I have no option to select my contour label style in my drawing all of a sudden. See attached dialog. They do exist in the settings but no option is available.
View 9 Replies
View Related
Mar 9, 2012
How to label the contour lines this way? I wanted to label the contours as shown in screenshot 1, but couldn’t know how to do that.
Which option should I choose to label the contours this way?
View 7 Replies
View Related
Mar 2, 2012
I have Civil3d2012 and have created a surface in one drawing and then referenced it to another. It appears to be working, but the contour labels will not work on the drawing where the surface is referenced. I have all the appropriate layers on.
View 1 Replies
View Related
Jul 15, 2013
I'm working in 2011. Just labeling some contours in a new drawing, using the 'Multiple' setting. I found I could only draw one tangent of Contour Label Line. If I continued, I could click but no labels were created and on finishing the command I could see that those clicks had been ignored. What gives?
I found that the labels were on the current layer, instead of the layer they're meant to use.I also realised that my current layer was locked (from the previous task).
if the current layer is locked, the contour labels ignore the layer setting that they are meant to use, and come in on the current layer instead. And you can only draw one tangent's worth of contour labels at a time before finishing the command and restarting.
Solution: make a different layer current or unlock your layer.
are contour labels generally created on the current layer and then moved to their proper layer?Is that why it hit a snag: it wasn't permitted to move the object to a different layer because the one it was on was locked?
View 3 Replies
View Related
Sep 19, 2013
In C3d2011 I cant seem to change my contour label style from STYLE A to STYLE B. Seems I used to right click and change it from there but that oprtions not available?
View 4 Replies
View Related
Nov 30, 2011
I cannot get my contour label to mask the contour line that it sits on. I have no problems creating contour labels for my surface (whether using single, multiple, or multiple at interval options). I have set my contour labeling defaults to not display the contour label line, as well as set Label Mask Type to Contour Line Only. Under contour label style under Layout>Border>Background Mask, this is set to True.
View 9 Replies
View Related
Jun 17, 2013
As far as I know there is no way to add or remove vertices on contour label lines. Is this correct?
If so it's another one for my wish list.
Neil Wilson (a.k.a. neilw)
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]....
View 4 Replies
View Related
Nov 6, 2013
How to use the Surface Contour Label Group class in the .NET API.
My first guess was that I had to create an instance object of the class and name it, and then use a "Create" method (e.g., CreateMultipleAtInterval) from there, like this:
Dim labelgroup As SurfaceContourLabelGroup
labelgroup.CreateMultipleAtInterval(arguments)
However, this doesn't work, as Visual Studio told me "Warning: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated."
I tried just saying:
SurfaceContourLabelGroup.CreateMultipleAtInterval(arguments)
But that didn't seem to work either. How this class works and get it to add some contour labels to a drawing?
View 4 Replies
View Related
Sep 6, 2012
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
View 1 Replies
View Related
Jan 23, 2013
I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.
When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.
View 9 Replies
View Related
May 13, 2013
When I label my Contour lines there is a blue line(perp) running right thru the middle of it.
I have looked to take it off but can not find it.
View 5 Replies
View Related
Jul 24, 2012
Is it possible to weed contour lines displayed in a surface based on the slope? I am having an issue plotting construction plans due to steep cut slopes and flat adjacent areas. I have several cuts ranging from 33%-50% adjacent to flat areas around 1%. Due to the drawing scale required by the client and the .2FT and 1FT contours required to detail the flat areas, my steep cuts appear as dark hatches due to the tight contour lines.
View 1 Replies
View Related
Apr 24, 2012
It happens during many different commands. The command itself doesn't seem to affect this problem. It doesn't always happen, but every so often, as I'm in the middle of a command, when I scroll past a contour line the program freezes. Sometimes it comes back to life after a few seconds of thinking, but sometimes it just sits there non-responsive forever.
Possible ideas:
-Contour Labels set to "Mask Contour Line Only"
-Dynamic Inputs on
-Selection Preview is on (but it's disabled for "When a command is active")
-Surface is shortcutted into the drawing
-Contours are from an XREF
Civil 3D 2013
64-bit HP Desktop - HP Z420
Intel Xeon CPU E5-1620 0 @ 3.60 GHz
24GB RAM
AMD Radeon HD 6570
Windows 7 SP1
View 9 Replies
View Related
Nov 16, 2012
The contour lines themselves are in model space. The contour texts are in paper space. How do I make the line hide under the text?
View 4 Replies
View Related
Feb 23, 2012
How does a 97 contour pass through a closed feature line with elevations between 97.3 and 97.8?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 3 Replies
View Related
May 29, 2012
how I can get an azimuth label on my line?
View 5 Replies
View Related
May 19, 2013
I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.
how to add the name into a label style?
View 4 Replies
View Related
Oct 26, 2011
Unable to change line label precision (both bearing and distance).
The goal is N10d10'10"E, 100.00'
Civil 3D 2012 is giving N10d10'10.00", 100.000'
I am using a template with the distance precision set to 2.
The drawing setting->Ambient settings distance precision are set to 2.
The feature settings distance precison is set to 2.
View 9 Replies
View Related
Feb 15, 2012
I have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 6 Replies
View Related
Jun 24, 2013
I have a line label style that I created for labeling bearing and distance. The Dragged State Component for display is set to "As Composed", because I want to just slide it down the line a bit, but have it remain at the same rotation as the line, and it is not allowing me to do so. I also have a label style set up for "Stacked Text" and that works fine when I move it away from its original line I labeled
View 2 Replies
View Related
Nov 15, 2012
Is it possible to insert a formula or is there an existing expression I could use to calculate area in acres from a General Overall Length line label if I input the width?
View 5 Replies
View Related
Aug 16, 2012
I have a plan I want to create a table of feature line (the ones used as ditch cl's) with the designation (ie R1), the overall length (this part I can do) and then the Delta z of the entire feature line. I can get segment Delta z, but not the entire Delta z.
View 4 Replies
View Related
Nov 15, 2012
I am trying to get my bearing label short name spaced to read with a "." after the N & E. Example: N. 00 00 00 E.
View 9 Replies
View Related
Dec 12, 2012
I am looking for a Line Label Style Expression which will perform a rounding function on distance labels that display my "General Segment Length" value.
What I need is to be able to remove "Trailing Zeros" from my distance values, so that if precision is set to say 0.01 and my distance value is measured as 45.5, I do not get 45.50 but 45.5.
I need this to round for:
1 decimal place
2 decimal places and
3 decimal places
View 9 Replies
View Related
Dec 21, 2012
Why doesn't the drag state work when adding a line label between 2 points in Civil 3D 2013.
View 2 Replies
View Related
Aug 25, 2011
Curve tags number okay but the line tags keep numbers when curves are in between. Happens in both 2011 and 2012.
View 1 Replies
View Related