AutoCAD Civil 3D :: Contour Line Labels

Jan 23, 2013

I have my existing surface data referenced into my production drawing. I am trying to label the existing surface contour lines in the production drawing. I only have one surface in this drawing right now, so, I don't believe this is a multiple surface issue.

When I try to add single and multiple contour labels to the existing surface, I cannot select a contour line. I try to click on a contour line, using osnap, and I just keep getting prompted to pick a contour line.

View 9 Replies


AutoCAD Civil 3D :: Contour Labels Have A Perp Line Going Through It

May 13, 2013

When I label my Contour lines there is a blue line(perp) running right thru the middle of it.

I have looked to take it off but can not find it.

View 5 Replies View Related

AutoCAD Civil 3D :: Contour Labels 2

Sep 20, 2011

When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?

Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?

View 4 Replies View Related

AutoCAD Civil 3D :: Contour Labels Will Not Add

Dec 16, 2013

I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.

Unable to create contour labels

Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.

View 9 Replies View Related

AutoCAD Civil 3D :: Contour Labels Not Showing Up?

Dec 20, 2012

Im working with 2013 Civil 3D. I have a site with polyline contours that have assigned elevations. I created my surface from the contours but when i try to label them with elevations, nothing. I label them by contour-mulitple with interval. All that is inserted are tic marks at the designated interval.

View 8 Replies View Related

AutoCAD Civil 3D :: Contour Labels - Units

Feb 15, 2012

I have a contour label style that is using metric units instead of imperial. Where in the style or defaults is this controlled? Also, is there a way to tell what the units are from the contents? <[Surface Elevation(Um|P3|RN|Sn|OF|AP|GC|UN)]>

View 9 Replies View Related

AutoCAD Civil 3D :: Contour Labels Change

Jun 26, 2012

I have a drawing containing a surface with contour labels. There are two tabs representing two separate drawings. On one of the drawings I want to change the viewport color of some of the layers so certain features will plot lighter than on the other drawing.

When I change the color of a layer within the viewport, however, the masking on all the contour labels takes on a color (not associated with the color of the layer they're on, or anything else for that matter). Once the masking takes on the color, you can't undo it. You have to exit the drawing without saving it and call it up again in order to have the labels appear properly.

View 4 Replies View Related

AutoCAD Civil 3D :: Contour Labels On Layer 0

Oct 15, 2012

I have two contour label styles (major and minor) both separate layers. When I bring in a label style (single) for those layers it puts those labels on layer 0. How do I stop this. I wish to have these labels placed onto the layers on which they are created.

View 2 Replies View Related

AutoCAD Civil 3D :: Same Surface Contour Labels On Different Layers

Mar 29, 2012

So I have an existing grade surface and I am laying out a number of different site designs.  I've got all my surfaces from those site designs on different layers each displayed in a different layout. I need to label existing contours on each layout in different places. I've setup additional contour label styles (two for each design, major, and minor) and layers (two for each design, major, and minor). However, when I add labels to my existing surface, they come in on the right layer, but whenever I freeze any of the many layers my contour labels are on, they all turn off. The only workaround I can figure is to make copies of my existing surface for each design option and label each independantly. However, this is inacceptable as far as data management goes, since my one file will be hundreds of megs with all those surfaces. 

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 8 Replies View Related

AutoCAD Civil 3D :: Size Of Contour Labels In Xref?

Jul 19, 2013

I have a basemap with labeled contours and the text sizes I am using all look good both in model and paper space, but when I xref the same basemap into another drawing, the xref of the basemap looks good in model space but the size of the labels on the contours from the basemap in paper space look way to small..

View 4 Replies View Related

AutoCAD Civil 3D :: Contour Labels Are Not Visible When XREF'd?

Mar 11, 2013

I have a topo drawing containing contours which are labeled with elevation.

I Xref'd this drawing into another drawing and the contour labels do not show up, so i have to re-create the contour labels.  

Is there a way for the labels to show up automatically when XREF'd?

View 9 Replies View Related

AutoCAD Civil 3D :: How To Change Contour Labels Precision

Oct 25, 2010

i am trying to change my contour label precision from 700 to 700.50, i am working in a very flat area and i placed .25' and 1' contours on my site plan but can only get even foot labels to show. where do i change the precision, i tried in units, no luck.

View 9 Replies View Related

AutoCAD Civil 3D :: Contour Labels Vanish On Rebuild

Apr 9, 2013

2012. I have contours from a corridor merged into a full surface. I labeled the contours, then had to rebuild the corridor after the profile changed.

The contour labels all vanished and had to be redone. While surface contours work well for roadway corridors with few intersecting roads.  I am not finding them to be useful for parking lots.  I am thinking I will have to go back to the extract all contours from model and neaten them up for acceptable graphic presentation, then label them using the label line function and pray they don't change.  i.e. old LDD work flow.

The automatic outside boundary also does not work well when updating parameters and rebuilding.  The old fashioned LDD boundary from polyline seems to work better most of the time.

View 1 Replies View Related

AutoCAD Civil 3D :: How To Make Contour Labels Visible

Jan 7, 2013

I am trying to make my contour labels visible, indepently of the Visible status of the contours in the surface style of the original surface that I am working on. I have to do this due the final topo looks strange in the borders so I am displaying another contours -that do not have elevation- and make look the drawing better. The problem is that if I turn off the Visible property of the contours, the labels turn off even that they were created in a different layer and attached to a label style with its own layer property.

View 6 Replies View Related

AutoCAD Civil 3D :: Does Contour Labels Refresh After Modified Setting

Mar 11, 2013

just a general question regarding contour labelling.  Does it refresh automatically after I modified the labelling setting?  My experience is no. Here is what I did, given an existing surface.  Go to Surfaces -> Add Surface Labels -> Contour-Multiple at Intervals, I gave a decent interval, labels the entire surface with a few runs.  Later on I decided to say hide the contour label lines, so I would go to Settings ->right click on Surface->Contour Labelling Defaults->set Display Contour Label Line to False, click Apply.  So this setting will affect all the contour labelling created thereafter, but does it change the contour labels that I already created?  If not, how can I change those labels?

View 3 Replies View Related

AutoCAD Civil 3D :: Contour Labels Leave Dashes When Frozen?

Aug 1, 2013

I have a drawing with two viewports. One needs to show topography. The other does not. When I freeze the surface layer in the second viewport, the contour lables leave behind a dash. It's on layer 0 so I can't VP freeze without losing other things. 

Where do these dashes come from? They aren't a visible part of the contour label. They only show up when the surface is on a frozen layer. The only purpose they serve is to show where a contour label would be if the surface wasn't frozen.

View 6 Replies View Related

AutoCAD Civil 3D :: Applying Default Contour Labels Styles To Surface Styles?

Aug 21, 2012

How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style).  Right now the default is a "finished contour" label style for all surfaces.

View 4 Replies View Related

AutoCAD Civil 3D :: Contour Label Line

May 31, 2013

I have been creating contour surface labels, which utilize a 3-point  contour label line with grips to adjust, and this is my question:

when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches.  i can manually fix this by shorting the line, but this seems very inefficient. 

1. is there a setting to have the label only placed on the center grip of the three?

View 2 Replies View Related

AutoCAD Civil 3D :: Surface Display - Weeding Contour Line?

Jul 24, 2012

Is it possible to weed contour lines displayed in a surface based on the slope?  I am having an issue plotting construction plans due to steep cut slopes and flat adjacent areas.  I have several cuts ranging from 33%-50% adjacent to flat areas around 1%.  Due to the drawing scale required by the client and the .2FT and 1FT contours required to detail the flat areas, my steep cuts appear as dark hatches due to the tight contour lines. 

View 1 Replies View Related

AutoCAD Civil 3D :: Often Freezes Mid-command When Scroll Over A Contour Line

Apr 24, 2012

It happens during many different commands. The command itself doesn't seem to affect this problem. It doesn't always happen, but every so often, as I'm in the middle of a command, when I scroll past a contour line the program freezes. Sometimes it comes back to life after a few seconds of thinking, but sometimes it just sits there non-responsive forever.

Possible ideas:

-Contour Labels set to "Mask Contour Line Only"

-Dynamic Inputs on

-Selection Preview is on (but it's disabled for "When a command is active")

-Surface is shortcutted into the drawing

-Contours are from an XREF

Civil 3D 2013
64-bit HP Desktop - HP Z420
Intel Xeon CPU E5-1620 0 @ 3.60 GHz
AMD Radeon HD 6570
Windows 7 SP1

View 9 Replies View Related

AutoCAD Civil 3D :: Contour Texts / Make Line Hide Under Text?

Nov 16, 2012

The contour lines themselves are in model space. The contour texts are in paper space. How do I make the line hide under the  text?

View 4 Replies View Related

AutoCAD Civil 3D :: 97 Contour Pass Through A Closed Feature Line With Elevations Between 97.3 And 97.8?

Feb 23, 2012

How does a 97 contour pass through a closed feature line with elevations between 97.3 and 97.8?

C3D 2011 (latest updates)

Win 7 Pro, 64-bit


View 3 Replies View Related

AutoCAD Civil 3D :: Line And Curve Labels And Tables

Jun 22, 2012

I am doing a project and I have a lot of feature lines.  I will need to be able to lable these feature lines with tags and then create tables for those.  My question is, is there an easy format that I can do that will lable these lines in an order I set it up?  Right now it just lables all over the place. The lines are counting the curves too.  For example: L1 L2 L3 C1 L5 L6 C2 L8.  I can make it work, would just think there is a better way.  BTW I am using Civil 3D 2011.

View 1 Replies View Related

AutoCAD Civil 3D :: Line Labels To Span Segments?

Mar 26, 2013

In trying to learn more about label styles, the C3D Help instructs one to:

2.  On the Layout tab of the Label Style Composer, select or create the label component that you want to span multiple          segments.

3.  In the Properties list, under General, change the Span Outside Segments property to True.Specify this setting for each component that you want to span multiple segments.

There is no "Span Outside Segments" to set to True in my Label Style Composer. The only T/F option under General is for visibility.

Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000

View 3 Replies View Related

AutoCAD Civil 3D :: Line / Curve Labels Button

Jan 24, 2013

Im trying to access the line labeling via the lines/curves menu heading on the main menu bar but i dont have the Lines/Curves drop down button. Is there a command i can enter to show this menu bar?

View 1 Replies View Related

AutoCAD Civil 3D :: Grips For Labels For Line And Curve Does Not Use Z Changes?

Aug 28, 2013

I'm using label for line & curve. 

I have discovered that the points from it is created are fixed in Z value.

You can use the grips with object snap , you can move the grips but the Z values are  preserved......

it should be to get the Z value of X,Y,Z given by object snap , isn't it ?

View 9 Replies View Related

AutoCAD Civil 3D :: Line Labels To Span Segments?

Apr 3, 2013

Mastering C3D - the bit about spanning segments on an exterior line crossing several parcels. It works like the book shows except the crow's feet only appear at the start and end of the parcel's segment that I click on to insert the label, instead of the start and end of the whole segment. The distance the label reports is correct.

The crows feet are blocks inserted at the start and end of the direction arrow component (visibility false) in the author's style? I have turned the arrow's visibility on and can see that the arrow does not span the parcels.

I have another drawing in a later chapter on alignments that has the same spanning label style that works and I can't for the life of me discover the difference between the two.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD Civil 3D :: Rotate Line And Curve Labels

Sep 17, 2010

We would like to be able to rotate line and curve labels in Civil 3D 2010.

Some of our drawings get really crowded and we need to slightly rotate the line or curve labels.  This is fine with regular autocad text, but how can we accomplish this with styles and dynamic line/curve labels?  I can't seem to find a way to do this with the grips and setting up new styles with specified rotations isn't an option because we need to be able to fine tune and eyeball the rotation of the label to make it look right.

C3D 2012 SP1
Win 7 64 Enterprise
Intel Xeon 3.07 Ghz 8GB Ram
NVIDIA Quadro 4000

View 2 Replies View Related

AutoCAD Civil 3D :: Delete All Labels On Feature Line

Jan 31, 2013

How to delete all labels on a feature line? Ideally if we could just pick the line and have it's labels deleted. QSelect and Select Similar require too much interaction to be convenient.

View 9 Replies View Related

AutoCAD Map 3D :: Contour Labels On PDF

Nov 21, 2011

I am having difficulties with plotting labels on pdf. I am using 2011 map3d. I am struggling with labeling contours. Basically i have shape file which draws out isometrical lines, then i label contours, everything looks nice/works before plotting but when i plot it on pdf, it basically seems to do a selective plotting of contour labels (all the contours are plotted nicely). Some contour areas are covered nicely, some have only few left, but most parts have none.

My drawing is basically large tiff and shape file on top of it. Contour lines are covering slightly bigger area than the tiff file. contour labels that are actually plotted are mostly drawn on the bottom and left part of the drawing (plus they also seems to be somewhat following the vertical measurements, as if they are only drawn to a certain height or so), mostly out of the tiff part, but also partially continue on top of tiff, until are not plotted anymore. When i want to view contour labels on the whole drawing area, i basically have to "dr" tiff to back, altough drawing order is set so that tiff is drawn first and then other are placed. Sometimes it just boggles my mind why CAD acts like this. If it wouldnt draw any contour labels, i would understand, but it basically does it partially/regionally somehow and even then there are those regions, where labels are drawn only partially, but are still drawn.

It has got to be something to do with the size of the labels compared to the screen. At the moment size context is set to "map space" and when i look at the drawing in model, i can see all the labels nicely (they are drawn in absolute units and are not relative to screen). When i look at it in the layout (layout scale is set to 1 mm=1), i can only see lower part of the drawing covered in labels. As i increase the size units, it gradually draws labels to the upper northern part also.

I was suggested to export the contours and labels as a dwg,open it and then plot it, but what happens is that map3d seems to be able to export only 2000 items (labels). I am sure it would work, if i somehow could manage to export all the contour labels. I am going to add a picture also just to give a better understanding of the problem. Polyline marks the tiff image location and basically the black dots are the labels that are being plotted.

The thing is, that it actually copies exactly 2000 labels into text, which seems to be corresponding to the "rasterthreshold" command limit of 2000, is it just a coincidence?

View 3 Replies View Related

AutoCAD Civil 3D :: Feature Line Labels Not Updating With Last Change

Nov 9, 2012

I have a feature line that is perpendicular to another and connected to it at a PI .When I modify the elevations of one of the feature lines, the labels for slope and PI elevation of the dependent feature line do not react and update without having to invoke a REGEN.

View 9 Replies View Related

Copyrights 2005-15, All rights reserved