I am looking for a Line Label Style Expression which will perform a rounding function on distance labels that display my "General Segment Length" value.
What I need is to be able to remove "Trailing Zeros" from my distance values, so that if precision is set to say 0.01 and my distance value is measured as 45.5, I do not get 45.50 but 45.5.
I need this to round for:
1 decimal place
2 decimal places and
3 decimal places
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
We are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template
I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.
After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.
i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?
I'm trying to edit my label style so that the bearing has no decimal places and the distance has two. I thought it would be similar to editing the contour label precision but it doesn't seem to be that way.
View 3 Replies View RelatedI'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies View RelatedI am trying to create a label for fire hydrants in plan view that shows the flange elevation. I want the elevation to be 0.4' above the adjacent road profile. I added a reference text component to my label style that shows the profile elevation. Where would I find the expression for the profile elevation reference text?
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
Here is my expression:
IF((FMOD({Raw Station}+5,15))!=0,-1,({Profile Elevation}-100*FLOOR({Profile Elevation}/100)))
I have also tried it without a pair of brackets:
IF((FMOD({Raw Station}+5,15))!=0,-1,{Profile Elevation}-100*FLOOR({Profile Elevation}/100))
and I have tried it using {Station Value} instead of {Raw Station}
Here's what it's meant to do (because it's a long one):
If the station value + 5 is not divisible by 15, return -1
If the station value + 5 is divisible by 15, return the profile elevation,
if the profile elevation is in the 100 range, subtract 100
if the profile elevation is in the 200 range, subtract 200...etc
Here is my conundrum: If I use the expression in a profile label, it works fine. But if I use it in an alignment label as reference text, it returns -1 for every value.
I was wondering if it is possible to use an expression in a general note label? The type of label I am using is a general note label that displays our finish grade profile elevation in plan view. What I am trying to do is add a value to that label for the TC elevation and G at the ROW. I noticed in the settings tab of the tool space, surfaces has an expression button that has what I want but I am not seeing that under General/Label Styels/Note. Is it possible to right my own expression? We are using Civil 3D 2008 with Windows XP.
View 3 Replies View RelatedHow to create an alignment label expression for Geometry Point that will show the delta angle rather than the instantaneous direction or perpendicular direction?
View 1 Replies View RelatedIs there any way to allow user input in an expression for a profile label?
View 5 Replies View RelatedWhen I open the expression variables available in a label style, I see different options available for different label styles.Can I combine expression variables from different label types? For example, say I want to make an expression that takes the Surface Elevation from a spot elevation label and subtract a variable from a pipe variable such as end invert elevation?
If you can do this, were can I find the expressions file on my computer or network? Can they just be dragged and dropped between label styles?
Am I limited to the fields that appear on the label for a pipe network data band, or can I add my own customized expressions?
Using Building Design Suite Ultimate 2014
I'm trying to create a custom expression in a structure table that will list the "size" of the structure, wheter it be a circular or rectangular structure. My column simply states size and I want it to label 5' for a circular or 4'x4' for a rectangular (or whatever the specific sizes are). The thought was to create an IF function, but Structure Shape was not available to use in expressions (among other problems). Short of using the description field (tedious) as a workaround?
In this example - CB-104 is a rectangular structure and CB-106 is a circular. I'd like the CB-104 size to read 4'x4'.
Civil 3D 2014 SP1
I am trying to change the default label styles for AddSegmentLabel under general styles using .NET...
Dim X As Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel = CD.Settings.GetSettings(Of Autodesk.Civil.Settings.SettingsCmdAddSegmentLabel)()
X.Styles.LineLabel.Value = strChildStyleName ... says name does not exist
or
X.Styles.LineLabelStyleId.Value = oidChildStyle ... "The type of objectId is wrong"
If I manually change it to a child style and then check the values, they are the same as what I'm trying to set them to. If you use a "parent" style then these both work. Am I doing something wrong or this another limitation?
Civil 3D 2013 - Windows 7 Pro 64 - Dell T3500 - Xeon 2.67 - 24gb - Quadro 600
Now, in my understanding, the flow arrow should either be rotated 0, or 180 (pi radians). But clearly, some of them like to have their own mind about things, and decide on some other rotation. It seems that on the steep slopes, the arrows go a bit skew.
I think the skew is related to the actual elevation difference of the segment, rather than the steepness of the slope. A long segment with 15% slope has a worse skew than a short segment at over 30%, presumably because the elevation difference from the start to the end of the segment is larger.
I have applied a client's style to the alignment to show PI's. In this case we have 2 alignments close to each other (NB & SB of road). PI's close to each other will then overlap. What I would like to do is apply a style that will have the line and text go exactly in the opposite direction. I am trying to avoid dragging the text as that seems to bring up several more issues. I am looking for whatwhere to change within the style editor to make this happen.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
Is there a way I can add a macro or formula in a label style definition?For instance, I'd like to show the difference in elevation for the ends of a line and whether it's a cut or fill without having to do everything manually.
View 2 Replies View RelatedI'm using AutotCAD Civil 3D 2012 in the Civil 3D workspace, trying to create a point label style to show what I need it to show. I click on a point and select it's properties. Once on the properties tab I go down to the point label style box and clicked on the down arrow. A list of options then comes up and I selected the create/edit option. A small point label style box then appears and i choose the button directly next to the drop-down list and the label style composer box pops up. In this box I go to the layout tab and then go down to the contents box. I select the browse button next to the contents to select the contents. I select the contents I want but when I apply it every point has those contents and I need just that one point to have those contents.
View 3 Replies View RelatedI have created many lable style.Is there a way to print out all the setting, layout commands or summary. in the lable style composert?
View 1 Replies View RelatedI was trying to find a way to not have the last ending Station Label show up on my centerline is there a override or way to tell it to just label to the last 100 or 50 foot station?
View 4 Replies View RelatedI have created a Parcel Area Label Style in code, and also added a text component to the style. The point in adding a text component was to expose a Parcel UDP on the label, but the text component does not display as expected (read: as it displays when the same thing is done in the GUI).
I set the LabelStyleTextComponent.Text.Contents.Value to the same string as I get when I add the Parcel UDP to the text component in the GUI (from the Properties-drop down in the Text Component Editor), but the label then just displays the "template", e.g. "<[My UDP(CP)]>", exactly as it shows in the Editor. When the style and text component is added through the GUI, the label correctly displays the current value of the UDP "My UDP" on the Parcel.
If I go into the Text Component Editor after having added the area label style and it's text component through code, and add the same UDP to the text component (so that it stores the UDP twice), then the label correctly displays the UDP value twice on the Parcel (!). That is, Civil then suddenly realizes it's a UDP.
Imported points and I have a label style to label tree sizes automatically, but when there are many trees near each other labels start to overlap. So I will typically rotate the label style 180 degree or drag the label, but I am curious if its possible to have label always stay horizontal no matter what my rotation angle is.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
I want to modify the default Profile Grade Break label style that comes with the product as I don't want the line component in the style. When I delete the line component I have to reconfigure the attachment points of the remaining components. I want the marker to attach to the feature, then the PVIS to the marker, then the PVIE to the PVIS. The problem is these components are in the wrong order in the style and thus I can't get the PVIE to be left aligned with the PVIS. There apparently is no way to re-order the components in the style. The only solution seems to be to delete and recreate them in the proper order. Is this the case? If so then there defintely needs to be an enhancement in the product to change the order.
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
i have a building corner point label style that labels the corner of bldgs with the elev on top of an arrow and the full description of a bdlgc on bottom of arrow...rotated at 45 degrees....
i have 3 components...a block of an autocad leader i call an arrow that i just drew from left to rt on layer 0 and named the component arrow...then i have the elevation and the description
problem is that when i rotate label to move it out of way of obstructions it flips the elev on bottom and the desc on top!!
i have tried a number of combinations of anchor pts and changing the "flip anchor pts with text" to true/false under the general tab of the label style composer...
i cant get it!
In C3d2011 I cant seem to change my contour label style from STYLE A to STYLE B. Seems I used to right click and change it from there but that oprtions not available?
View 4 Replies View RelatedPoint label styles do not scale properly in raster plots. Raster plots have long been my fix for making wipeouts and masks behave. Without the excellent fix raster plots have been, I'm sunk! All of my work depends upon raster plotting to maintain consistently correct output with absolutely no wipeout or masking errors. My point label styles all have a text height of 0.11" which is the plotted height according to the documentation. They are exactly the right height in all page setups with non-raster plot devices. But, when my page setup includes a raster device the text is scaled to just a speck. It should be 32 pixels high at the 288 pixels per inch I have specified but it is barely two or three pixels high both on my display and in my ploits.
The attachments show the wipeout/mask problem in 2012 DWF output and the rescaling of point labels in 2012 raster (TIFF) output. I am in critical need of a fix that does not involve special point label styles just for raster plots. Autodesk!? I already have to use a special pen tables for raster plots with pens sizes scaled for each dpi resolution I use but that has been settled for many years now.
I did some search and got some code from 2009 post which not really working for me. Since I am not a pofr for autocad civil3D and just staring to learn how programing with autolisp, I am having trouble to debug the code:
(defun xp()(setq sset1 (ssget "X" '((0 . "AECC_PARCEL_SEGMENT")))) (COMMAND "EXPLODE" SSET1 "")
if (= (setq ss (ssget "X" '((0 . "AECC_COGO_POINT")))) nil)
(setq ss (ssget "x" '((0 . "AECC_COGO_POINT")))) );
FILTERS UNCLOSED POLYLINES(defun c:changestyle()
(setq xlabel (vlax-ename->vla-object (car (entsel))))
[Code] ....
Civil 3D 2011, updates installed - I have a user who is manually importing points into his drawing. He has set the default label style in his command settings to a specific style, but no matter what he does the points come in with the previously set default style (the out-of-the-box label style). We've tested this in a new drawing with the same results. We've tested this on several computers with the same results.
My initial thought was that something on the network was holding this setting somehow. We disconnected his computer from the network with the same results.
What could be causing this label style to stick?
how to create a label style for design center of road (simple tangent) in profile that will work between multiple profile views. I've used the 'Create Multiple Views' profile view wizard. I use a horizontal dimension style label for CL road (looks just like an autocad linear dimension). I'd like the label work across separate views i.e. stop at view end, pick back up at view start.
The label I currently use is simply a line component from tangent start dimension to tangent end dimension and the text component is anchored to the line midpoint. Label looks as intended for normal use. For some reason the line drops as if looking for the actual pvi at the right side when i use multiple views.
I have set the default style for the drawing to a certain style by going to toolspace - settings and right clicking on point and clicking on edit feature settings ...under default styles i set it to the one I want for both point style and point label style......how come when I create a few manual points and then go to the prospector tab and right click on _all points, the point label style is not set to the default one I set it to as I described above? The points are not coming in the way I want them to?
View 3 Replies View RelatedI have Civil 3D 2013 and would like to define the station tick marks. Unfortuantely, the only style that appears on the Import pull down is "Standard". How do I go about downloading or loading from an appropriate program folder the "Tick" style set?
View 3 Replies View Related
