AutoCAD Civil 3D :: Quickly Add Points At The Insertion Point Of A Block?
Nov 8, 2012how I can quickly add points at the insertion point of a block? I have over 1400 and would like to find the quickest way to do it.
View 7 Replieshow I can quickly add points at the insertion point of a block? I have over 1400 and would like to find the quickest way to do it.
View 7 RepliesIs there a way to create a block with attributtes that automatically complete x, y, z, lat, long for the insertion point of the block?
I am trying to complete text in paperspace that will automatically fill in the lat long of a point in model space without using a table. I have tried field insertion with reference to a cogo point, but it doesn't give options for position on a cogo point. If I pick a block with attributes, it will let me pick any attributes, and x,y position for the block.
Cogo points show all the information I need to propagate in the properties....but how do I get that to translate into the text using fields or some other method?
Dell Precision T3600 - Windows 7 64-bit
NVIDIA Quadro 600
Intel(R) Xenon(R) CPU E5-1607 0 @ 3.00GHz 3.00GHz
8 GB ram - Two 1TB raid
We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
I have drawn some doors and saved them as blocks. Whenever I insert one or another, the door itself is far away from the insertion point. How can I modify this?
View 9 Replies View RelatedI create a block where coordinate 0,0 is my base/insertion point (which is established in an orientation that is to the lower-left of my blocks line work). In a new drawing I insert that block and specify coordinate 0,0 as my insert point. Instead of my insertion point being in the lower left it is in the upper right. I run into this in new version and old version drawings.
View 2 Replies View RelatedWhen I select a block, all points contained in the block are shown. How do I turn this off? I want to select the block and have only the insertion point showing.
View 1 Replies View RelatedMy boss gave me a drawing to make some changes on a particular block; however, every time I try to insert the block, it always insert the block in Paper Space even though I'm in Model Space.
Is there any way to change that insertion point? I want to insert the block in Model not in PS...
How can I find a block with a specific name and get what the coordinates are? What we have is our Bill of Material is attributed blocks. I am attempting to change the first one. Well all of the lines that list the parts are seperate blocks with the same name. Now the Top Line of the Bill of Material is a different named block. If I can find the coordinates of this block I can then select the first line to do what I need to.
If needed: AutoCAD 2013 User using Visual LISP for editing LISP and DCL files Also I have AutoCAD 2011 currently still available for us, but we are using AutoCAD 2013 for 99.9% of AutoCAD use
I have insert blocks in my dwg. It is the circle. While creating the block, i was just pick the point into the circle not exactly at the centre.
Now i want change the insertion point of the block at centre of the circle without moving the objects from the dwg.
Beacuse i had use block editor to change the insertion point. But after changing, all blocks were moved from the original position.
I have several existing block definitions and need to change the insertion point. Also, when creating a new block in the Block Editor, how do I define the insertion point?
View 9 Replies View RelatedMy multileader style uses a block as a content. How can I find world coordinates of insertion point of block entity within multileaders?
View 3 Replies View RelatedWe have several AutoCAD drawings with hundreds of block references inserted with imprecise coordinates. Now we need to dimension all elements and need to correct these positions.
I am searching for a routine to round these positions up or down towards a 5mm precision so I don't have to manually move every single block element.
Is there any way to automate the task or do you know any workaround (like inserting the elements into a drawing with poorer unit precision settings)?
I've have code to test if the insertion point is within a closed polygon. But prior to testing the insertion point I use ssget to trim the selection set initially..
(ssget "CW" Pnt_List (list (cons 0 "INSERT")(cons 2 BlockName)))
this requires that the whole Crossing Polygon is visible, so I do a zoom first. This requires time. Is there a way I can do this that does not require the zoom?
If I use this code it will give me the insertion point for a block
(setq ent (car (entsel "
Select Main Object: ")))
(setq InsPt (assoc 10 (entget Ent)))
Now if I try to use this for a surface label and try to get the insertion point
(setq ent (car (entsel "
Select Main Object: ")))
(setq oEnt (vlax-Ename->Vla-Object ent))
(vlax-dump-object oEnt)
I dont see anything that will get the insertion point.
How to create a sub-assembly with an insertion point parameter using Sub-assembly composer.
like this one below. I found this under the following sub-assembly. All I want is , when the user inserting the sub-assembly they may need to go on both the sides attached.
Example:
So the user should be able to select from the dropdown if the insertion point is 1 or 2. Before inserting.
Where can I find the command to globally scale blocks by selecting them and it scales each block around its insertion point.
View 3 Replies View RelatedI have numerous text objects I want to rotate 180 while retaining each text objects insertion point. There's got to be an easy way to do this.
Long explanation: I created an annotation template to label pipe diameters on an imported shapefile. Everythings good, labels are parallel with lines, except for the fact that some labels are upside down. Is there an expression that would eliminate this? In my annotation template, my rotation expression equals the "angle" field of the object. My "quick and dirty" fix was to burst the annoation labels, and manually rotate necessary text, which wasn't a huge headache since I'm dealing with a relatively small number of labels, but in the future I might have hundreds of upside down labels.
I wish to create a dynamic block containing some attributes. These attributes are inside rectangles that can't be modified in length using linear parameters ; but the attribute has to be always in the middle of the rectangle. So, I draw a line inside the rectangle (in a hidden layer) and insert the attribute with center justification (not sure for the translation) that I place in the middle of this line ; then I put a coincidence constraint (not sure for the translation, but it's the first one) linking the middle of the line with the middle of the attribute.
But here's the problem : when stretching my rectangle, the insertion point of the attribute suddenly changes from "center" to "bottom left".
Im still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedI am the only one using C3D 2012 in our office and the other users are complaining that they cannot insert blocks or paste clipboard content into drawings that I have saved from C3D 2012. This is true whether I use "C3D as AutoCAD" or the full C3D functionality. I understand that the newer C3D objects are not compatible with the older version but to my knowledge there are no C3D objects included in the drawings in question.
C3D 2009 users can wblock the drawing contents from the Model tab and each Layout tab, and reassemble those parts. Then they are able to insert blocks and paste content again. It is a very inconvenient solution and we only use it when the situation is critical. It also breaks sheet view linkage to our Sheet Sets when we do the wblock fix.
I've asked the others to try using Design Center or Windows paste (CTRL+V) and see if that works the next time they encounter the problem. I don't have C3D 2009 installed or I would have tested these ideas already. The others will not install C3D 2012 and so far the owner's will not force them to.
How can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker? I need the flowline to follow my profile elevations.
View 4 Replies View Relatedis it possible to create a surface quickly in Autocad using 3d survey points on a DWG?
The way I did it was 3dpolylines and then lofting the surfaces. Quite time consuming.
Is there a way to renumber all the points in a point group? Right now I am doing each point individually but I have many points and it would be wonderful to learn how to do that automatically.
View 4 Replies View RelatedIs it possible to add points to a surface without adding them to a point group? I've got a bunch of ponds I'm doing and it will save me some time if I could just select the points, and not have to put them in a point group then add the point group.
View 5 Replies View RelatedCreate a routine that looks for a block based on a portion of that block name, using a specified path or search path.
For example, block to search for is BLOCKABC123, so if someone inputs ABC or 123 as a block name, it will locate that block within that folder and inserts it into the drawing at a user specified location.
Ideally, if there is a check in that if it finds more than one match, then perhaps it flags or prompts you to choose 1, 2, or 3 option which block to use. But I can live without this special function if it requires too much time to code.
I have a point cloud with 161 million points in it. This is basically fine and works well but I need to create equally high resolution surfaces from certain regions of the point cloud. No matter what size I choose my export shape, it will only create a surface from a ridiculously small 750,000 odd points, a 'feature' which has been documented on these forums before. I have POINTCLOUDDENSITY set to 100.
My question is, how can I build a surface from this high resolution point cloud data that has more than 750,000 odd points?
I'm thinking about mosaic'ing - ie. making several smaller surfaces over the required area and pasting them together.
I have set the default style for the drawing to a certain style by going to toolspace - settings and right clicking on point and clicking on edit feature settings ...under default styles i set it to the one I want for both point style and point label style......how come when I create a few manual points and then go to the prospector tab and right click on _all points, the point label style is not set to the default one I set it to as I described above? The points are not coming in the way I want them to?
View 3 Replies View RelatedI'm trying to import a GPS coordinate file where our Surveyor has used both Points Names (Alpha-Numeric) and Point Numbers. see below. I have setup a Point File Format for Pname, North, East, Elev and RAW Description, to import this comma separated point file. The problem is that Civil 3D does not want to seem to use a numeric point name as a Point Number, instead the number is used as a Point name and Civil 3D assigns a Point number from the next availible point number. Is it possible to automatically, when the Point Name is a numer only to also assign it the same value as the Point Names?
I would really want Civil 3D to allow users to use Both, Point Names without assigning a Point number.
CP73,621590.855,846017.619,13.87,10
CP499,620699.227,845545.947,14.21,10
7738,621525.744,846624.727,15.1,10
CHK7737,621860.59,845594.224,14.611,10
8530,621051.442,844635.981,7.39,93
8531,621055.237,844586.744,7.068,93
8532,621054.167,844531.929,6.929
I am running C3D 2012
I have created a point style to flatten the points and lines I create locating buildings effortlessly. I have called the point style "no elevation" and set the 3D geometry to flatten it at zero elevation. I then created a Point key description BLDX that references the style "No Elevation". I also made a figure under my figure group for BLDX that is not a breakline.
My BLDX is still coming in at elevation as well as the corresponding figure. When I hover over the points, it shows that it is using my point style of "No Elevation".
Sometimes when i import points Civil 3d creates a Point group in the drawing with the name of the point file, sometime it does not. I prefer when it does create this point group. It always seems to create a Survey Point Group. How do i control wether or not a point group is created in the import?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I have created 8 points (from 4 locations with 2 depths in each location) in _All Points/Points. These 8 points are grouped into 2 Point Groups:
Points #1, #3, #5 & #7 for Point Group - (1) Depth#1 and
Points #2, #4, #6 & #8 for Point Group - (2) Depth#2.
The "Name" of Point is filled with the SampleID (like cdc-ss01-s1, cdc-ss01-s2,...) - see the attached file. From the HELP of AutoCAD C3D 2013, I have read/studies the "Point Tables" and "Point Label Styles" and I cannot figure out how to label the 8 points to show the "Point Number", "Point Elevation", and "Name" of Point (i. e. the SampleID like cdc-ss01-s1 & cdc-ss01-s2, ....).!!