AutoCAD Civil 3D :: Rotate Multiple Text Objects 180 While Retaining Individual Insertion Points?
Feb 14, 2013
I have numerous text objects I want to rotate 180 while retaining each text objects insertion point. There's got to be an easy way to do this.
Long explanation: I created an annotation template to label pipe diameters on an imported shapefile. Everythings good, labels are parallel with lines, except for the fact that some labels are upside down. Is there an expression that would eliminate this? In my annotation template, my rotation expression equals the "angle" field of the object. My "quick and dirty" fix was to burst the annoation labels, and manually rotate necessary text, which wasn't a huge headache since I'm dealing with a relatively small number of labels, but in the future I might have hundreds of upside down labels.
View 3 Replies
ADVERTISEMENT
Mar 1, 2013
I need to scale up about 300 circles (manholes) but i need to hold the center point of each manhole. is there a command for this so i don't have to scale each individual circle?
View 6 Replies
View Related
Mar 9, 2012
I am trying to create a tool that looks similar to Line in Autocad. I got the solution for dynamic multiple insertion points but the issue is the line is only visible after the end point is selected. But i want the line to be visible before selecting the end point, this should be as same as the line we use in autocad. Following is the code i used to create a line with multiple insertion points.
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurEd As Editor = acDoc.Editor
Using lock As DocumentLock =
[Code]....
View 6 Replies
View Related
Dec 5, 2013
I have a block that contains attributes. When I select the block, you can see all the nodes/insert points from the attributes within the text. I was wondering if there is anyway to have the block only show the insertion point of the block and not the attributes? The attached image shows what I am talking about.
View 4 Replies
View Related
Nov 18, 2013
With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies
View Related
Jul 25, 2013
I have a floorplan of a building and am labeling exits of the building for evacuation routes. Each exit label is on its own layer. I need to show the floor plan from different perspectives/orientations and therefore need to rotate the exit labels in place on their own individual axis. So far I have been going in and selecting the image (label) on each layer and rotating it 90 degrees and then repeating the process for the next label. When I group the layers they all rotate on one axis and therefore are not near the exit they are supposed to be near. Is there an easier (quicker) way to rotate the labels as I have to do this for four different perspective for each of four floor plans?
View 9 Replies
View Related
Nov 8, 2012
how I can quickly add points at the insertion point of a block? I have over 1400 and would like to find the quickest way to do it.
View 7 Replies
View Related
Oct 24, 2011
Is there a way (script possibly) to break multiple splines to individual spline objects? More specifically i want to find a quick way, when i have many splines (attached together) to make each spline (spline element) a separate spline (such as selecting it and detaching it). Unfortunately the "explode" command breaks each segment and not spline to an individual object, while selecting and detaching each one is not an option since i have to deal with hundreds or thousands of splines (produces by hair & fur).
View 2 Replies
View Related
Jul 3, 2013
I have long used the following lisp to convert multiple single text objects into multiple mtext objects (i.e. make each text entity into separate mtext entities).
; T2M - convert individual Texts/Dtexts to individual MTexts
; modified by Xanadu - www.xanadu.cz
;
(defun C:T2M (/ ss i elist)
[Code]....
However, the mtext entity always moves position slightly (compared to the original text entity) after converting the object. better lisp that converts multiple text entities into mtext entities (which are all separate still, i.e. not joined together) without the position of the entity changing?
View 4 Replies
View Related
Oct 4, 2013
C3D 2012 Win 7 Pro
I have Note label Style objects and Marker Style Objects that have layers assigned to them. When I bring a Note label or Marker Style into the drawing, it comes in on the zero layer. I know that the object layers of the drawing settings are controlling this. Is it possible to have the Note labels and/or Markers come in on the assigned layers of their Styles?
View 9 Replies
View Related
Mar 28, 2013
How do you rotate or move just one or two points in civil 3d? The surveyor used Translate Survey Database and moved all the points, but 4 of them were not included. What is the difference between translate and just the autocad command move and rotate?
View 5 Replies
View Related
Aug 14, 2006
My field crew assumed a coordinate system and surveyed a job. I need to rotate the points in my dwg to match another survey. I have not found a rotate points command. Other LDT type commands have been replaced by standard ACAD commands by adding the transparent commands to them. I tried to use the ACAD rotate command and the transparent commands to rotate my points, but there is no transparent command to find multiple points. I need to select the points by point number range if possible.
View 9 Replies
View Related
Nov 2, 2012
Any routine (perhaps a lisp) to move, rotate and align text with one swift command?
Something like this video below.
View 9 Replies
View Related
Nov 16, 2012
CS6 - Is it possible to rotate multiple objects independent of one another? In other words selecting say 9 object in a grid then rotating the all 30 degrees on their own axis.
View 5 Replies
View Related
Dec 19, 2013
I have used annotative text and selected yes for match orientation to layout for the text. In the viewport it is rotating automatically with the view, however the boxes around the text do not rotate as well. Is there anyway to automate this?
The Client requires a key plan which has all the pipe data on it. The key plan is oriented in one direction. Then for the plan & profile drawings, the plan is oriented in another direction. I don't want to have two create two sets of text (one for the key plan and one for the plan/profile drawing). How can I use one set of text and make it work in the key plan and for all the plan/profile drawings? Image is attached.
View 2 Replies
View Related
Jul 30, 2011
I have a simple block, I would like to do the following:
Type: Insert
Specify: Block Name
Click spot with cursor to have the block placed
Rotate the block for orientation
I know that if I use the Tool Pallets I can specify rotate on insert, but do not always want to use the Pallete. I also know I can assign a rotation parameter to the block so I can grip and rotate after insertion. Is there an easier way?
View 4 Replies
View Related
Jul 17, 2013
Have a number of std blocks with a single part number located centrally within a circle similar to std grid line coordinates used on architectural plans.
Is there a simple way to set the block up with its part number fixed centrally so that when the block is inserted at different rotation angles the part number always appears central within the circle and upright.
Forget lisp as only have LT.how to centralise the text within an attribute so its always central when block is rotated.
View 6 Replies
View Related
Oct 9, 2013
I have the need to put COGO points along the vertices of multiple 3D polylines in a DWG. I know how to do this individually for each 3DPL via the "Points>Create - Miscellaneous > Polyline Vertices - Automatic" or "CREATEPTPLYLNCTRVERTAUTO" command. Need tip on how to do this in a batch format for all the selected 3D PLines in the drawing without having to select each individual 3DPL and having to hit return to enter a description for each individual vertex? I can do without having to add a description and can leave each description blank or enter the same description for each.
I'm Using C3D2013.
View 6 Replies
View Related
Feb 20, 2013
We need to remove multiple survey database points from a drawing but not all, due to construction on a site previously surveyed. What is the best method for this?
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 8 Replies
View Related
Jun 26, 2012
I cant start drawing an object from anywhere else( ie. inside a grid) except form the points where grid lines intersect. How do i go back to old system? I need to get some work done fast.
View 2 Replies
View Related
Oct 2, 2012
If you can use the ALIGN command to align multiple text objects in the Y-Axis? (or X-Axis as well)
I know about changing the X value of a bunch of text objects to align them that way. I'm just wondering if the ALIGN command will allow you to do something similar?
I want to do this without lisp too. If there are other methods I'm always wanting to learn! I just had a new cad user ask me about the ALIGN command and I couldn't get it to do it.
View 3 Replies
View Related
Mar 29, 2012
the issue is when i try to publish multiple dwg files which containing civil 3d objects including data ref to pdf it won't do it other whatever drawing is currently open.i kinda can see why. because the data ref reading is not programmed in when "invisibly" opening the cad files. xref are autocad native and it works.
so no warnings or anything. just publish the first one and told me it's done. i've seen this years ago when first started using civil 3d but then i just never complained here.
is there a solution for this? what i did before was obviously open each drawing. then publish, huge waste of time. making me hate my job because of repetative tasks. i almost always try to automate.
yesterday made a program to make one surface for each csv file there was hundres of them and basically 2 hour programming and 1 minute to process the files once got the program working.can read subfolders to find csv file too.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 1 Replies
View Related
Jul 25, 2009
my elliptical objects are retaining their shape, specifically in the Glass Filter in the Distortion menu of Photoshop CS4. Same thing with any artistic or brush stroke filters. The inner region of the shape gets affected but it still maintains its circular/elliptical shape. This only started happening this morning after the first time I started up Photoshop (as in it worked the first time, but after that it hasn't been working properly). Blend mode is normal, there is no selection.
View 17 Replies
View Related
Dec 22, 2011
I was wondering if there is a way to edit single line text when there are multiple objects selected. I have multiple text which need their justification edited but there are non-text items amongst them. Instead of clicking on each of them I would like to just select the area and then edit the text as required.
View 3 Replies
View Related
Oct 29, 2007
Created L200 Annotative text in C3d drawing w/ SP1, INSTALLED SP2, working in dwg now I can not move, rotate or erase the text that is annotative (the two scale symbols) appear at every piece of text. I tried making in the STYLE text box toggling on and off "Annotative Text" does not work. Also did -purge Regapps, still can not edit text.
View 7 Replies
View Related
Feb 20, 2012
I can not remember how you do this QTO seems to only let you pick one object at a time surely there.
is a faster way crossing windows does not seem to work within the command.
View 2 Replies
View Related
Apr 28, 2013
how to edit revit objects in 3dsMax. How do I separate objects to make them individual objects? In other words, when I try to select the roof, I get ALL objects that are "dimensional lumber" i.e. I joists, roof, fascia, etc.
I tried selecting a roof polygon and making a copy and editing it but still when I apply materials to this polygon they apply to all of the dimensional lumber. Probably because I made a copy as a clone but it didn't give me the "copy" option.
View 1 Replies
View Related
Dec 14, 2012
Can I create a pipe network from multiple objects?
For example, I have 10 feature lines that I want to use to create one pipe network. Instead of creating 10 pipe networks one at a time, can I create one pipe network all at once?
View 4 Replies
View Related
Jun 19, 2012
I have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?
I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.
View 1 Replies
View Related
Nov 27, 2012
is there any way that Autocad can have multiple items placed on the clipboard for insertion use like the Microsoft Office Word programme has (up to 24 inputs). This would be a good feature to allow going to one file, copying what you need and then switching to your current drawing file and placing them as needed
View 6 Replies
View Related
Oct 3, 2013
If I don't want to VP Freeze everything on that layer, is there a way to individually VP Freeze certain objects on one layer? (without having to make new layers?)
The sitch: Making a ceiling plan, some dims are needed in all the other plans, but some are not needed in the ceiling plan. How can I simply turn "off" in the VP the few separate Dims I don't need? And that they can still turn up like normal in all the other VPs?
View 9 Replies
View Related