Photoshop Elements :: Rotate Multiple Layers On Their Own Individual Axis Not As A Group?

Jul 25, 2013

I have a floorplan of a building and am labeling exits of the building for evacuation routes.  Each exit label is on its own layer.  I need to show the floor plan from different perspectives/orientations and therefore need to rotate the exit labels in place on their own individual axis.  So far I have been going in and selecting the image (label) on each layer and rotating it 90 degrees and then repeating the process for the next label.  When I group the layers they all rotate on one axis and therefore are not near the exit they are supposed to be near.  Is there an easier (quicker) way to rotate the labels as I have to do this for four different perspective for each of four floor plans?

View 9 Replies


ADVERTISEMENT

3ds Max :: Rotate A Group Of Objects Along An Axis That Is Not X Y Or Z?

Dec 23, 2011

I'm trying to rotate a group of objects along an axis that is not x y or z. The objects are imported from Rhino. I also import a line representing that rotation axis. How do I set that line to be my axis?

View 1 Replies View Related

AutoCAD 2010 :: Group Selection Set Unable To Select Individual Elements Within Group

Mar 19, 2013

One of my designers running 2012 AutoCAD and 2012 CADWorx, can no longer select individual parts of a GROUP by shift selecting the unwanted elements.

I have tried to modify..

Pickadd
Group
PickStyle
PickAuto
PickDrag

but to no success.

Also fiddled with her Options file, still nothing+

View 6 Replies View Related

Photoshop :: Moving Individual Layers Put Into A Group In CS5

Apr 21, 2013

I'm having issues moving individual layers once they've been put into a group in CS5. It just moves everything in the group! Very inconvenient. This hasn't happened to me before or in CS6. How to correct this?

View 1 Replies View Related

AutoCAD Civil 3D :: Rotate Multiple Text Objects 180 While Retaining Individual Insertion Points?

Feb 14, 2013

I have numerous text objects I want to rotate 180 while retaining each text objects insertion point.  There's got to be an easy way to do this.

Long explanation:  I created an annotation template to label pipe diameters on an imported shapefile.  Everythings good, labels are parallel with lines, except for the fact that some labels are upside down.  Is there an expression that would eliminate this?  In my annotation template, my rotation expression equals the "angle" field of the object.  My "quick and dirty" fix was to burst the annoation labels, and manually rotate necessary text, which wasn't a huge headache since I'm dealing with a relatively small number of labels, but in the future I might have hundreds of upside down labels.

View 3 Replies View Related

Illustrator :: Applying Live Rotate / Multiple Copy Effect On A Group Of Paths?

Oct 16, 2012

I'm intermediate (at best) with Illustrator. I'm using CS6 on a 2009 iMac. How to make Illustrator ignore stroke weight/cap/join settings when I'm applying a live rotate/multiple copy effect on a group of paths? Currently, Illustrator sets the rotation point to the outermost part of my stroke (figuring in the strokes atrributes), but I only want it to calculate the from the path's structure: the coordinates of my designated anchor point.
 
Here's the top/right group of paths with a rotate/ 3 copies effect of 90 degrees. Looks problem-free at this view.

Here's that top/right group of paths with the addition of a reflect/ 1 copy effect of X-axis. Still no apparent problems.
 
But here's a close up of the misalignment of corner points. As shown, the Transform effect is based off the strokes attributes (the tip of its corner), not the actual location of the corner point.

It does not apply different cap/corner styles or stroke alignments; that only slightly nudges the pivot point to the center.
 
Plus, this one point stroke is somewhat arbitrary. I only set it so in order to see my dynamic effects.

Tweaking the vertical/horizontal moves effects of the rotated/copied elements won't support because this art will later undergo lots of alteration, mostly changes in stroke weight (maybe even variable stroke width).

I need the skeleton of my structure to snap together precisely.
 
Any solution, no matter how roundabout, would save this project!

View 4 Replies View Related

Photoshop :: Rotate Multiple 3D Layers Simultaneously

Aug 14, 2012

My first time using this forum, as I new to Photoshop CS6.
 
How do I link(or whatever) 3D layers in order for them to move together (such as, rotating)? I have a logo that has two layers, and I want the 2nd layer to be raised up off the other layer.

I have tried to link them, but when I do that, there's a circle with a line through it, signifying this I can't rotate the; environment, scene, current view, or the shape.

How do I over come this?

View 5 Replies View Related

GIMP :: Move Multiple Layers Into Layer Group?

Oct 15, 2012

How do I move more than one layer into a layer group at a time?

View 2 Replies View Related

Photoshop Elements :: How To Find Individual Image Size From Multiple Images On A Canvas

Jun 5, 2013

This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image

View 4 Replies View Related

Illustrator Scripting :: Create Individual Symbols From Individual Layers?

May 10, 2012

Is there a way to do this? Is there a script out there that can create individual Symbols from individual layers?
 
EDIT: I pasted this in the wrong forum so i moved it over here.

View 16 Replies View Related

GIMP :: Select Multiple Layers To Modify Scale / Rotate / Transform

Jul 11, 2013

If one can select multiple layers to modify i.e. scale, rotate, transform... or is it only possible one layer at a time?

View 4 Replies View Related

Photoshop Elements :: How To Load Multiple Images Into Multiple Layers

Oct 6, 2012

I have a series of pics (approx 80) that I'd like to load into Elements, with each photo going into a single layer.  I google'd a series of old posts where somebody used a "script", but the links are no longer working and that trails is dead.

View 9 Replies View Related

Photoshop :: Tag Individual With Name In Group Photo When Place Cursor Over Face?

Dec 12, 2012

Is it possible to tag an individual with their name in a group photo when I place the cursor over the person's face?

View 3 Replies View Related

Illustrator :: How To Copy One Group Of Paths / Elements From One Layer To Other Existing Layers

Jul 5, 2013

Note Layer > Duplicate will not work in this regard, because I want to copy one group of paths/elements from one layer to other existing layers, not to a new layer.
 
I have not found a command for this, nor have I found any scripts. Note I'm using CS3 but have been thinking about an upgrade.

View 15 Replies View Related

Photoshop :: Layers To PDF / Turning On / Off Individual Layers

Nov 20, 2012

I want to create a PDF from Photoshop while keeping on a master layer/group for all pages AND turning on/off individual layers/smart object in another group? I know there may be a way to do this with Layer Comps but I would rather just use layers.

View 3 Replies View Related

AutoCAD .NET :: Rotate Ucs About Z-axis?

Mar 22, 2012

when you have a 3D-object, with a specific origin, i would like to know how it is positioned in space, X, Y, and Z coordinates, but also A, B, and C (like Tilt, Roll, Pitch), where A is rotation Angle around Z-axis, B around Y-axis, and C around X-axis. I am using this for a kuka robot

i can change the position of the UCS, but don't know how to only rotate the ucs about the Z-axis

'--- Set origin of UCS icon
acUCSTblRec.Origin = Psource(0)
acUCSTblRec.XAxis = Psource(0).GetVectorTo(Psource(1))
acUCSTblRec.YAxis = acUCSTblRec.XAxis.GetPerpendicularVector

View 2 Replies View Related

3ds Max Modeling :: How To Rotate 30 Degrees Along An Axis

Feb 24, 2012

I am trying to rotate 30 degrees along an axis.

In Rhino, it is simply using Rotate3D -> pick your axis of rotation -> type degrees -> enter

In Max, how do I pick an axis rather than world XYZ?

I'll upload pictures for details

View 2 Replies View Related

AutoCAD 2010 :: Rotate UCS By Z-axis

Jun 27, 2012

The behavior in AutoCAD 2012 has changed with regard to the UCS command. I am trying to rotate my UCS along the Z-axis.

In 2011, I could enter UCS [enter] Z [enter] then select 2 points on *any* line using END point osnaps to have the ucs rotate along the Z-axis at the angle of the selected line.

Now in 2012 when I enter UCS [enter] Z [enter], a rubber-band line displays anchored from a pre-selected point which appears to be the drawing origin, usually 0,0,0.  I am only allowed to select a single point, which results in the UCS NOT rotating to match the line as before.

I am aware that I could now use the OBject option, and then select one end of the line.  This is fine except it does not work if I select a line that is part of an attached xref.  With the old method in 2011, I could select 2 points of *any* line.

I am also aware that I could "type" in a value in both cases above but that option is too time-consuming and error-prone. Are there any legacy options available for the UCS command to make it work as before?  Or is there a way to override the UCS-Z command option to not pre-select the first point at the drawing origin?

View 6 Replies View Related

GIMP :: How To Rotate 2D Image About Y Axis

Jun 27, 2012

Is there a way in gimp to rotate a 2D image (e.g. BMW%20M3%20-%202002%20-%2003.jpg) about the Y Axis? I tried GMIC but that rotates the layer in 3D. I would like to create a view of the front of the car or any any in between.

View 6 Replies View Related

AutoCad 3D :: Rotate UCS Around Z-Axis Only - Functionality Gone?

Dec 5, 2013

This week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.

Looking at the image below (the blue box is just to represent the relationship between the pipes):

I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other. In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.

In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.

In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.

In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?

View 4 Replies View Related

3ds Max Modeling :: Scale A Group Of Polygons In Their Local Axis?

Jul 6, 2013

how do I scale a group of polygons in their local axis? I have seen people doing this fine in Maya.
 
I have attached an image that explain this clearly. It's a simple cylinder, extruded and when I scale the extruded polygons in local x axis, they get scaled in crazy different axes.

View 5 Replies View Related

Paint Shop Pro :: Rotate Images In All Axis In X5?

Nov 24, 2012

Is it possible to rotate images in all axis in PSPx5? If not, any tip to a program doing so working with PSPX5?

View 2 Replies View Related

AutoCad 3D :: How To Rotate Hand Rail In 3D In Z Axis

Jan 18, 2013

DSCF9856.jpg
Hand rail.dwg.

I have tried to rotate this railing in 3D so that it looks like this photo but I can't. I've tried several different things with the UCS but clearly I don't know what I'm doing. So I'm turning to the CAD community that does. I can draw the hand rail no problem. But the drawing always leaves the finished hand rail in the X,Y plane. I need to rotate it in the Z axis (I think). Here is the orientation I want the railing to look once it's drawn. I need a step by step procedure so I can learn how to do this the correct way for future reference.

View 9 Replies View Related

AutoCAD 2013 :: Rotate UCS Around Z-axis Only - Functionality Gone?

Dec 4, 2013

This week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.

Looking at the attached image (the blue box is just to represent the relationship between the pipes):

I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other.

In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.

In 2014 UCS, Z rotates the UCS from some unrelated point.

In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.

In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.

there is no way of selecting 2 points for a Z-axis rotation.

TL;DR

In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?

View 1 Replies View Related

AutoCAD 2010 :: How To Rotate Crosshair X Axis

Nov 8, 2012

How to rotate the X Axis in the Crosshair? See picture attached.

View 3 Replies View Related

Maya Animation :: Spin Object - Rotate It On One Axis

Oct 26, 2010

If there is a quick easy way to spin an object, rotate it on one axis through the 360 degrees a number of times.

View 2 Replies View Related

AutoCAD Inventor :: Rotate New Workplane Along A Default Axis With API

Nov 5, 2011

How do you create a new Workplane from a Defualt Plane and rotate it along a default Axis?I am new to API and trying to create workplanes and rotate them along a Axis.

Im trying to use "AddByPlaneAndOffset" is this the right method?

View 8 Replies View Related

AutoCAD Inventor :: Rotate Work Plane Around Axis

May 31, 2013

how to rotate a work plane around a circular axis ? I have a work plane on the end of a tube, I need the work plane set at an angle.

View 1 Replies View Related

3ds Max Modeling :: Multiple Vertices Selected At Multiple Positions (heights) In The Z Axis

Mar 25, 2013

Is there a way to have multiple vertices selected at multiple positions (heights) in the z axis and enter a value of 0 and have all of them jump to 0 in the z axis? Seems like a no brainer to me, but can find a way to do it.

View 9 Replies View Related

Photoshop Elements :: Selecting Multiple Layers

Mar 3, 2013

I'm trying to select multiple layers in the layers panel on a Mac. I normally do 'command-click' and it works to select many layers. Now, it doesn't work. When I click the second layer, it draws a marquee around it. I need to select multiple layers in order to drop shadow many layers at the same time.

View 3 Replies View Related

AutoCAD Inventor :: Create Wheel That Can Rotate About Horizontal Axis?

Dec 2, 2011

I am trying to create a wheel that can be rotate about the horizontal axis.  It should have a hole for axle to fit through.  However, when I try to do this it will not let me select the horizontal axis to rotate about.  I also tried to rotate about a center line that I created but it wouldn't do that either..

Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved