AutoCAD 2010 :: How To Rotate Crosshair X Axis
Nov 8, 2012How to rotate the X Axis in the Crosshair? See picture attached.
View 3 Replies
ADVERTISEMENT
AutoCAD 2010 :: Rotate UCS By Z-axis
Jun 27, 2012The behavior in AutoCAD 2012 has changed with regard to the UCS command. I am trying to rotate my UCS along the Z-axis.
In 2011, I could enter UCS [enter] Z [enter] then select 2 points on *any* line using END point osnaps to have the ucs rotate along the Z-axis at the angle of the selected line.
Now in 2012 when I enter UCS [enter] Z [enter], a rubber-band line displays anchored from a pre-selected point which appears to be the drawing origin, usually 0,0,0. I am only allowed to select a single point, which results in the UCS NOT rotating to match the line as before.
I am aware that I could now use the OBject option, and then select one end of the line. This is fine except it does not work if I select a line that is part of an attached xref. With the old method in 2011, I could select 2 points of *any* line.
I am also aware that I could "type" in a value in both cases above but that option is too time-consuming and error-prone. Are there any legacy options available for the UCS command to make it work as before? Or is there a way to override the UCS-Z command option to not pre-select the first point at the drawing origin?
AutoCAD 2010 :: Align Or Rotate Objects Parallel To X Axis?
Dec 19, 2013Lisp routine or macro that will either rotate or align selected objects so they are parallel to an axis on the current UCS?
Specifically, when placing mtext to label an object. I typically align my ucs to the object then create the text so it is parallel to the object. It would be great if I could create the text with a rotation of 0, align my ucs to the object to be labeled and then with a single click, select the text making it parallel to the X axis.
AutoCAD .NET :: Rotate Ucs About Z-axis?
Mar 22, 2012when you have a 3D-object, with a specific origin, i would like to know how it is positioned in space, X, Y, and Z coordinates, but also A, B, and C (like Tilt, Roll, Pitch), where A is rotation Angle around Z-axis, B around Y-axis, and C around X-axis. I am using this for a kuka robot
i can change the position of the UCS, but don't know how to only rotate the ucs about the Z-axis
'--- Set origin of UCS icon
acUCSTblRec.Origin = Psource(0)
acUCSTblRec.XAxis = Psource(0).GetVectorTo(Psource(1))
acUCSTblRec.YAxis = acUCSTblRec.XAxis.GetPerpendicularVector
AutoCad 3D :: Rotate UCS Around Z-Axis Only - Functionality Gone?
Dec 5, 2013This week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the image below (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other. In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
AutoCad 3D :: How To Rotate Hand Rail In 3D In Z Axis
Jan 18, 2013DSCF9856.jpg
Hand rail.dwg.
I have tried to rotate this railing in 3D so that it looks like this photo but I can't. I've tried several different things with the UCS but clearly I don't know what I'm doing. So I'm turning to the CAD community that does. I can draw the hand rail no problem. But the drawing always leaves the finished hand rail in the X,Y plane. I need to rotate it in the Z axis (I think). Here is the orientation I want the railing to look once it's drawn. I need a step by step procedure so I can learn how to do this the correct way for future reference.
AutoCAD 2013 :: Rotate UCS Around Z-axis Only - Functionality Gone?
Dec 4, 2013This week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the attached image (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other.
In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
there is no way of selecting 2 points for a Z-axis rotation.
TL;DR
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
AutoCAD Inventor :: Rotate New Workplane Along A Default Axis With API
Nov 5, 2011How do you create a new Workplane from a Defualt Plane and rotate it along a default Axis?I am new to API and trying to create workplanes and rotate them along a Axis.
Im trying to use "AddByPlaneAndOffset" is this the right method?
AutoCAD Inventor :: Rotate Work Plane Around Axis
May 31, 2013how to rotate a work plane around a circular axis ? I have a work plane on the end of a tube, I need the work plane set at an angle.
View 1 Replies View RelatedAutoCAD 2010 :: Invert Crosshair Color In 2011
Nov 24, 2010Is there a way to make the cross hairs default to the inverse of the color under them (e.g. black when over white, blue when over yellow, cyan when over red, etc.)? I remember that it did this in previous versions, but I can't find a setting for it in 2011.
View 9 Replies View RelatedAutoCAD 2010 :: Crosshair Displaying Trails All The Time?
Feb 22, 2012my crosshair displays the trails all the time. What can I do to resolve this problem; it's not the mouse setting.
View 2 Replies View RelatedAutoCAD Inventor :: Create Wheel That Can Rotate About Horizontal Axis?
Dec 2, 2011I am trying to create a wheel that can be rotate about the horizontal axis. It should have a hole for axle to fit through. However, when I try to do this it will not let me select the horizontal axis to rotate about. I also tried to rotate about a center line that I created but it wouldn't do that either..
Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram
AutoCAD Inventor :: Grip Snap Rotate By Axis Malfunction?
Nov 16, 2011I'm trying to rotate a piece in an assembly by a selected axis to a precise angle, but the program just won't let me. I get to rotate it around with my mouse, but it only lets me change the angles at 5 degrees minimum. I try to type in a precise angle into the box, but it only lets me type in 1 character. Below is a screenshot of what I mean (I'm using Inventor 2011).
[URL]....
It either only lets me put in the first digit or won't let me manually change the value at all. What is up with this? The tutorials clearly says I can put in a arbitrary value.
AutoCAD 2010 :: Change Crosshair So It Is At Isometric Angle For Drawing?
Mar 13, 2013How do I change the crosshair so it is at an isometric angle for drawing?
View 4 Replies View RelatedAutoCAD 2010 :: Crosshair In Y Direction Broken In Specific Drawing
Jun 13, 2012Have a specific drawing that the crosshair in the Y direction is broken (sse attached image). Exacctly in middle of screen this problem was seen also in older autocad releases (R2008)
The UCS is world and PLAN view is set, the screen is OK the display card + driver is OK. The weird thing is this is only in this dwg and even if it insert it to fresh dwg in comes good.
AutoCAD Visual LISP / AutoLISP :: Rotate Block XY Plane But Also Z Axis
Jul 3, 2012I'm inserting blocks with lisp using the following code.
(defun C:test()(setq MYPOINT (getpoint "
Select an insertion point"));(command "_-xref" "attach" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" "_Scale" "1" MYPOINT)(command "insert" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" MYPOINT "" ""))
The lisp however only allows me to rotate in the x-y plane but I also want to rotate it in the z-axis hoe can I do this?
I also tryed to combine a 3d rotate to the code, as follows but to no success...
(defun C:test() (setq MYPOINT (getpoint "
Select an insertion point"));(command "_-xref" "attach" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" "_Scale" "1" MYPOINT)(command "insert" "C:/ICT/GEBERIT/XREFS/650-270-00-1.dwg" MYPOINT "" "");Rotates the item in the z axis...(setq MYANGLE (getstring "
Specify rotation angle for the Z-axis "))(command "_Rotate3D "_x" "LAST" "" "last" MYANGLE ))
AutoCAD Inventor :: View Face - Rotate With Respect To Origin Axis
Jun 2, 2013is there a way to tell Inventor to align the view to be perpendicular to the Origin axes when View Face or Sketch on face is selected?
It is most disturbing to have to work with the view cube once in the Sketch just to have it make sense?
This is in Inventor Pro 2012.
AutoCAD Inventor :: Cannot Rotate Part Round Main Assembly Axis
Sep 28, 2013Although the part, marked in blue in the picture, has, to my opinion, degrees of freedom, i cannot rotate it round the main assembly axis, the Z axis.
Maybe it's connected to the 2 holes underneeth it, which i projected?
Or maybe because of the axis i made through the M24 thread?
AutoCAD Visual LISP / AutoLISP :: Copy / Move And Rotate Block(s) About Y-axis
Jul 31, 2012I found a program which rotates selected block(s) about thier insertion point. I modified it to rotate each of the block(s) about the y-axis. Works great. Now, I would like to change it so that it rotates a copy of each block about the y-axis and leaves the origial block in place. Its kind of like the mirror command exept it is rotating the new block(s) to the other side instead of flipping them. I want to keep all or the parameters of the block(s) the same as each original. I am using AutoCAD 2010. MOCORO is not recognized as a command. The new features workshop says to use the new command AMCOPYRM, which is not recognized either. Go figure.
(defun RotateDuplication (/ CN ENT theObjects SS)
(vl-load-com)
(setq SS (ssget (list (cons 0 "INSERT"))))
(repeat (setq CN (sslength SS))
(setq CN (1- CN)
ENT (ssname SS CN)
[Code] ......
AutoCAD Inventor :: Get Disc (Coin) To Continuously Rotate 360 Degrees On Its Vertical Axis?
Jun 18, 2013I am trying to get a disc (Coin) to continuously rotate 360 degrees on its vertical axis.
View 5 Replies View Related3ds Max Modeling :: How To Rotate 30 Degrees Along An Axis
Feb 24, 2012I am trying to rotate 30 degrees along an axis.
In Rhino, it is simply using Rotate3D -> pick your axis of rotation -> type degrees -> enter
In Max, how do I pick an axis rather than world XYZ?
I'll upload pictures for details
3ds Max :: Rotate A Group Of Objects Along An Axis That Is Not X Y Or Z?
Dec 23, 2011I'm trying to rotate a group of objects along an axis that is not x y or z. The objects are imported from Rhino. I also import a line representing that rotation axis. How do I set that line to be my axis?
View 1 Replies View RelatedGIMP :: How To Rotate 2D Image About Y Axis
Jun 27, 2012Is there a way in gimp to rotate a 2D image (e.g. BMW%20M3%20-%202002%20-%2003.jpg) about the Y Axis? I tried GMIC but that rotates the layer in 3D. I would like to create a view of the front of the car or any any in between.
View 6 Replies View RelatedPaint Shop Pro :: Rotate Images In All Axis In X5?
Nov 24, 2012Is it possible to rotate images in all axis in PSPx5? If not, any tip to a program doing so working with PSPX5?
View 2 Replies View RelatedAutoCAD Inventor :: Automatically Project X-axis / Z-axis Or Z-axis Onto Sketch Plane?
Aug 25, 2010Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
Maya Animation :: Spin Object - Rotate It On One Axis
Oct 26, 2010If there is a quick easy way to spin an object, rotate it on one axis through the 360 degrees a number of times.
View 2 Replies View RelatedRevit :: Create Light Fixture With A Head That Rotate In Two Axis
Nov 16, 2011I am trying to create a light fixture with a head that can rotate in two axis so that the light can aim up or down and left or right.
I have been unable to create a light fixture that can rotate up and down as shown in the Revit help files.
Here is a resume of my two attempts at creating this and the reasons why they failed:
Embedded family solution: The embedded family will not rotate vertically even as a face based fixture hosted on a line reference. If you rotate the line reference in the horizontal axis, the hosted embedded fixture ignores the rotation and does not follow.
Unique family solution: The light source will not move even if it is locked to a reference line, it evokes an error.
Photoshop Elements :: Rotate Multiple Layers On Their Own Individual Axis Not As A Group?
Jul 25, 2013I have a floorplan of a building and am labeling exits of the building for evacuation routes. Each exit label is on its own layer. I need to show the floor plan from different perspectives/orientations and therefore need to rotate the exit labels in place on their own individual axis. So far I have been going in and selecting the image (label) on each layer and rotating it 90 degrees and then repeating the process for the next label. When I group the layers they all rotate on one axis and therefore are not near the exit they are supposed to be near. Is there an easier (quicker) way to rotate the labels as I have to do this for four different perspective for each of four floor plans?
View 9 Replies View RelatedAutoCAD 2010 :: Different Elevations For Z Axis
Apr 3, 2012When I am creating a drawing, every so often, when I draw something, it gives me different elevations for the Z axis. Is there a way to keep that at 0? I'm not sure if it's because of vendors blocks, or whatever the reason, and I know how to change the elevation back to 0, but how do I stop it from starting to begin with?
View 2 Replies View RelatedAutoCAD 2010 :: Create A Reference Axis?
Jul 10, 2013I wanted to create a reference axis, which should look like the one in the following picture (B):
how I can create such an reference axis? Is there a tool for it or is it usually created manually?
AutoCAD 2010 :: Scale Block In On Just Y Or X Axis?
Nov 7, 2012I am told there is a way that i can scale a block in on just the Y or X axis. How do i do this?
View 2 Replies View Related