is there a way to tell Inventor to align the view to be perpendicular to the Origin axes when View Face or Sketch on face is selected?
It is most disturbing to have to work with the view cube once in the Sketch just to have it make sense?
This is in Inventor Pro 2012.
They are all gone in my parts and assemblies. Only are they visible in the browser when I open a particular part or assembly of the parent. Need them for constraints .
View 9 Replies View RelatedI created an Assembly-Constraint between two Work planes by creating a Geometry Proxy
CreateGeometryProxy(OriginWorkplane, TargetWorkPlanProxy)
Now, I want to look into the assembly Constraints and want to get the origin Work plane of the component. So, I now, it's the entity One of a specific Constraint I also now.
What I get is a Face Proxy (the EntityOne gives back a FaceProxy). But how can I get the Workplane, the Proxy Element once was created?
I can get the Surface Body the Work plane was created on, but I don't get the name of the Workplane. My target is, to get the name of the work plane.
URL...how to move the origin of a part when you want a common origin for everything. in iv2012 you also get angles about axis, in greyed out boxes.
In a test assembly I can get the offsetting to work, but not the rotations. The part I want to edit origin of is rotated in all three axis.
Using API is there a way to add a WorkPoint where an Axis and a Part Face Intersect?
I need this to be able to create a WorkPlane normal to the surface of the part at that location.
How do you create a new Workplane from a Defualt Plane and rotate it along a default Axis?I am new to API and trying to create workplanes and rotate them along a Axis.
Im trying to use "AddByPlaneAndOffset" is this the right method?
how to rotate a work plane around a circular axis ? I have a work plane on the end of a tube, I need the work plane set at an angle.
View 1 Replies View RelatedI am trying to create a wheel that can be rotate about the horizontal axis. It should have a hole for axle to fit through. However, when I try to do this it will not let me select the horizontal axis to rotate about. I also tried to rotate about a center line that I created but it wouldn't do that either..
Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram
I'm trying to rotate a piece in an assembly by a selected axis to a precise angle, but the program just won't let me. I get to rotate it around with my mouse, but it only lets me change the angles at 5 degrees minimum. I try to type in a precise angle into the box, but it only lets me type in 1 character. Below is a screenshot of what I mean (I'm using Inventor 2011).
[URL]....
It either only lets me put in the first digit or won't let me manually change the value at all. What is up with this? The tutorials clearly says I can put in a arbitrary value.
Although the part, marked in blue in the picture, has, to my opinion, degrees of freedom, i cannot rotate it round the main assembly axis, the Z axis.
Maybe it's connected to the 2 holes underneeth it, which i projected?
Or maybe because of the axis i made through the M24 thread?
I am trying to get a disc (Coin) to continuously rotate 360 degrees on its vertical axis.
View 5 Replies View RelatedIs it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
we have the design suite with Max, Mudbox, etc. I love the rendering and materials in Max over Inventor's studio, but one thing I can't figure out: In Inventor I can hold F4, click on the screen and the orbit now rotates around where I clicked, so I can change and set my view rotation origin at will or for the situation. In Max it seems to me (a new user) that the view rotation origin is completely random. Sometimes it is the middle of my model, sometimes 30 feet behind it and it spins off the screen.can you adjust the view rotation origin like Inventor? Or what is the method for knowing where the view will be rotated from?
View 3 Replies View RelatedI cannot select origin to constrain sketch with dimension to origin?
I selected Sketch,
expanded origin,
selected mywork plan (xy)
drew rectangle,
input dims,
right click for marking menu,
selected dimensions,
Origin is yellow,
cannot select it and then edge of rect to set dim that will center sketch on origin? Just like the videos show, but cannot select origin>
My part is at an arbitrary angle relative to one of the planes and i cannot align the view in a drawing to be horizontal.I try to make a view, in the part file, in which the model will be horizontal, but there isn't any precise input for views.
I used the Look At tool to look at one face and all i need now is to rotate the view 90 degrees round one axis, but when i touch the line of the compass in the Constrained Orbit command the view jumps back to some position.
I use the split face tool on my ipt. When i create a idw of this part I want to show the split face line in the drawing. When I initially place the view the line is shown, however when the place view command is finished the line is not shown.
I see nothing obvious in the place view dialog box controlling the visibility of this line............how do i show this line in the view?
Inventor 2012, windows xp
Inventor 2010 Certified Professional
I frequently use the "Make Components" feature in order to derive assembly parts from solid bodies in a single master part file. Then I can quickly align the parts in the assembly with the "Ground and Root Component" utility. However, when the part is placed at an angle, the derived part becomes misaligned in the viewports of my idw files after the part gets rotated to a new angle. Then I have to manually reset the rotation by editing each viewport and selecting "View Face." If the angle has changed only slightly, sometimes I won't notice the difference, and I'll forget to re-align my viewports. Is there some way to automatically keep a viewport aligned with an specific face on a part?
If that's not possible, I guess the simplest method would be to place each part into its own assembly and constrain it to the global UCS, but I don't want to have to do that for every angled part in my assembly.
I also considered drawing only sketch blocks in my master file for the angled components, and deriving the sketch blocks to create parts that are properly aligned with the origin planes in their respective ipt files, but with that method I'd end up with a more complex master file with lots of exported parameters and extra working geometry, and I'd have to constrain these parts manually instead of using "Ground and Root Component."
-Using Autodesk Inventor Professional 2012
when you have a 3D-object, with a specific origin, i would like to know how it is positioned in space, X, Y, and Z coordinates, but also A, B, and C (like Tilt, Roll, Pitch), where A is rotation Angle around Z-axis, B around Y-axis, and C around X-axis. I am using this for a kuka robot
i can change the position of the UCS, but don't know how to only rotate the ucs about the Z-axis
'--- Set origin of UCS icon
acUCSTblRec.Origin = Psource(0)
acUCSTblRec.XAxis = Psource(0).GetVectorTo(Psource(1))
acUCSTblRec.YAxis = acUCSTblRec.XAxis.GetPerpendicularVector
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
Is it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedIn 2013, just placed a view in an idw. Now I need it rotated 90°. In pre2012, there was a rotate Horizontal and Rotate vertical command where we could pick the edge and it would align to it.
Has that been taken out of 2013 or am I just overlooking it? Restarted Inventor and that didnt work. I did not restore the marking menu because I have some customizations that I dont want to lose.
For what its worth, Wiki help shows the "Rotate View" command in the video..... maybe I don't have the full version...IDK. Looks like I am missing several commands here, like Apply Design View.
The behavior in AutoCAD 2012 has changed with regard to the UCS command. I am trying to rotate my UCS along the Z-axis.
In 2011, I could enter UCS [enter] Z [enter] then select 2 points on *any* line using END point osnaps to have the ucs rotate along the Z-axis at the angle of the selected line.
Now in 2012 when I enter UCS [enter] Z [enter], a rubber-band line displays anchored from a pre-selected point which appears to be the drawing origin, usually 0,0,0. I am only allowed to select a single point, which results in the UCS NOT rotating to match the line as before.
I am aware that I could now use the OBject option, and then select one end of the line. This is fine except it does not work if I select a line that is part of an attached xref. With the old method in 2011, I could select 2 points of *any* line.
I am also aware that I could "type" in a value in both cases above but that option is too time-consuming and error-prone. Are there any legacy options available for the UCS command to make it work as before? Or is there a way to override the UCS-Z command option to not pre-select the first point at the drawing origin?
This week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the image below (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other. In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
I can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
I have successfully been able to rotate the drawing view. rotating the view label.
View 1 Replies View RelatedI wish to rotate my "entire view" to fit the portrait style.. idw. Well, the base must be rotated but I forgot the rule. [URL]
View 9 Replies View RelatedDSCF9856.jpg
Hand rail.dwg.
I have tried to rotate this railing in 3D so that it looks like this photo but I can't. I've tried several different things with the UCS but clearly I don't know what I'm doing. So I'm turning to the CAD community that does. I can draw the hand rail no problem. But the drawing always leaves the finished hand rail in the X,Y plane. I need to rotate it in the Z axis (I think). Here is the orientation I want the railing to look once it's drawn. I need a step by step procedure so I can learn how to do this the correct way for future reference.
This week I upgraded from 2011 to 2014 and have noticed a major change in rotating the UCS around only the Z-axis.
Looking at the attached image (the blue box is just to represent the relationship between the pipes):
I want to, as a simple example, rotate the UCS around the Z-axis from the end of one pipe to the end of the other.
In 2011 UCS, Z would allow me to select the end of one pipe and the end of the other and rotate to the angle of the red line shown.
In 2014 UCS, Z rotates the UCS from some unrelated point.
In 2014 UCS then selecting the two ends rotates the UCS X-axis to the direct line between the two.
In a working scenario the end of the two pipes would be in vastly different positions. Drawing a line between them, flattening it then using UCS, E on the flattened line give the functionality I want, but is a very slow way of doing it.
there is no way of selecting 2 points for a Z-axis rotation.
TL;DR
In 2011 if I wanted to rotate the UCS around the Z-axis I would type UCS, Z then select 2 points and the UCS would rotate around the Z-axis but the X & Y axis would remain as it was. This is no longer the case in 2014, how do I do this now?
How to rotate the X Axis in the Crosshair? See picture attached.
View 3 Replies View RelatedI did it earlier, but now everytime I try "alt-click" to make the light blue cross hairs, nothing happens. I am trying to make a gear in illustrator and this is a key componant.
View 6 Replies View RelatedIs there any way to use the "Rotate at angle" command outside of the "custom view" environment?
Is there actually any technical reason why the controls in the attached screenshot are not available in the Studio and normal modelling environments?