AutoCAD Inventor :: Showing Split Face In Drawing View
Oct 3, 2012
I use the split face tool on my ipt. When i create a idw of this part I want to show the split face line in the drawing. When I initially place the view the line is shown, however when the place view command is finished the line is not shown.
I see nothing obvious in the place view dialog box controlling the visibility of this line............how do i show this line in the view?
Inventor 2012, windows xp
Inventor 2010 Certified Professional
View 1 Replies
ADVERTISEMENT
Nov 7, 2013
I frequently use the "Make Components" feature in order to derive assembly parts from solid bodies in a single master part file. Then I can quickly align the parts in the assembly with the "Ground and Root Component" utility. However, when the part is placed at an angle, the derived part becomes misaligned in the viewports of my idw files after the part gets rotated to a new angle. Then I have to manually reset the rotation by editing each viewport and selecting "View Face." If the angle has changed only slightly, sometimes I won't notice the difference, and I'll forget to re-align my viewports. Is there some way to automatically keep a viewport aligned with an specific face on a part?
If that's not possible, I guess the simplest method would be to place each part into its own assembly and constrain it to the global UCS, but I don't want to have to do that for every angled part in my assembly.
I also considered drawing only sketch blocks in my master file for the angled components, and deriving the sketch blocks to create parts that are properly aligned with the origin planes in their respective ipt files, but with that method I'd end up with a more complex master file with lots of exported parameters and extra working geometry, and I'd have to constrain these parts manually instead of using "Ground and Root Component."
-Using Autodesk Inventor Professional 2012
View 2 Replies
View Related
Sep 19, 2013
I'm trying to model plug welds in IV2014. I've read all the posts here that say that I need to split the hole faces. Problem is, the split face command doesn't seem to appear in weldments. I want to make the holes to be plugged as a weld preparation. Am I just missing something here, or is IV so backward that a common weld can only be achieved when not working with a weldment?
Inventor Pro 2014 SP1
HP Z400 Workstation
Intel Xeon W3565 @ 3.20GHz
12Gb RAM
Win 7 64 Pro SP1
Spacepilot Pro v3.17.4
View 1 Replies
View Related
Jan 2, 2013
I am having an issue with drawing files. I have set views on assembly files. But on the idw file it is showing wrong views... And this is making problems when i am trying to give dimensions. I have attached jpg files.
View 7 Replies
View Related
Dec 16, 2013
I am attempting to split a face so I have a good area to apply a load in simulation and 3/4 of the areas split just fine but I CANNOT get the 4th area to split! This is all just projected geometry but left and right are symmetrical so I can't figure out why the L side works but not the R side.
View 2 Replies
View Related
Dec 2, 2013
I'm trying to apply a Knurled Face appearance to a bar the color will change from the current yellow to a polished steel but either the diamond patter is to fine or not there at all. I've be into the Appearance setting moved the sliders back and forward the preview image changes but NOT the actual appearance on the bar itself.
View 1 Replies
View Related
Apr 26, 2012
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 1 Replies
View Related
Dec 13, 2012
how to show section view in base view with out projection the component.
View 2 Replies
View Related
May 14, 2013
I can't create a split view of a section broken in. I've attached the screenshot.Is there a workaround to do it?
View 1 Replies
View Related
Jan 15, 2013
Say I draw a mesh sphere and I do the Split Mesh Face. Why am I fail to select the mesh face to split? It only allows me to pick the lines.
View 1 Replies
View Related
Jun 2, 2013
is there a way to tell Inventor to align the view to be perpendicular to the Origin axes when View Face or Sketch on face is selected?
It is most disturbing to have to work with the view cube once in the Sketch just to have it make sense?
This is in Inventor Pro 2012.
View 3 Replies
View Related
Jul 26, 2013
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies
View Related
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
Sep 27, 2013
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
View 3 Replies
View Related
Nov 25, 2008
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies
View Related
Oct 12, 2013
I tried the tool Splite Face use a curved wall,But only on straight surface is activated.
View 2 Replies
View Related
Oct 27, 2009
Is there a way to hide the lines between areas created via the split face tool? If not, my end goal is to have an area on a surface appear a different color than the surrounding area, with no lines between. The surface is the face of an extrusion in an in-place family.
Revit 2009
View 3 Replies
View Related
Sep 20, 2012
the situtation is splitting a floor face in the exiting phase to "paint" the floor tile pattern in the existing restrooms and then removing that once in the new phase and resplitting to "paint" the new pattern...
is it possible to split a floor face in existing phase, paint it, then move to new face and un-split and paint it to create a new split and new paint?
View 1 Replies
View Related
Jul 6, 2012
An IDW view is showing a second iteration of a part instead of one of each. I have tried turning the visibly on / off in the ipn. I have also toggled the associativity on / off. The view shows the correct image during its preview, but when the view is done being created, it shows the wrong part again.
View 6 Replies
View Related
May 7, 2012
When creating a new view of flighting on a tube part of it shows up like it should and part shows up as dashed lines and when you turn on "shaded" the parts that are dashed do not shade. All of the flighting parts come out of the same file and the tube is from a different file.
View 5 Replies
View Related
Sep 29, 2011
Running into some strange text issues... fonts having problems and text not showing on the drawing that is in the text box. (shows fine with out the bold option but does not when its turned on)
files attached should explain.
inv 2012
sp up to date
View 3 Replies
View Related
Sep 16, 2013
I'm trying to make a view showing a motor-jackscrew unit with the jackscrew at the fully retracted position and also with the jackscrew at the fully extended position (in phantom). Refer to the attachment.
My initial plan was to have two views in the drawing, one retracted and one extended, and then just align them vertically and horizontally. But it turns out that you can only align vertically OR horizontally, not both at the same time. So I created an assembly of two iAssemblies, one with the screw extended and one retracted. Then I made the drawing view from the direction that placed the extended assembly directly behind the retracted assembly.
View 3 Replies
View Related
Jun 8, 2012
I have a part in which one of the folds needs to be done at assembly and not during manufacturing of the other bends.
Is there a way I can show this so that the manufacturing print sees exactly what they need to do and nothing more but then on the unit assembly the assemblers see that the unfolded tab needs to be folded down?
Can this be done all in one part file?
View 4 Replies
View Related
Feb 12, 2013
I have an assembly of a rod in a cylinder. When compressed, this rod sticks out 10mm from the cylinder. When extended, this rod sticks out 50mm. I am trying to create a drawing which shows the compressed state and extended state together.
View 3 Replies
View Related
Oct 24, 2011
when putting a bmp image on the ipt and creating the decal works fine. When I bring the ipt in to the drawing it fades out from the center to the upper right hand side. How to fix it in 2012. In 2009 it was simple to fix this by changing to open gl setting in application options, hardware.
View 2 Replies
View Related
Oct 15, 2012
There is any option to merge bottom face of pad eye and pipe curved face... Something like
1. Extrude face to a surface or
2. like notch option available in frame generator ?
N:B - pad eye is made by extrusion and pipe made by frame generator.
View 2 Replies
View Related
Aug 22, 2012
All I need to do is merge a circular face to a flat face, so both faces become one continuous face. Is this possible at all?
I have a attached a screenshot to show what I mean. Face 1 needs to be merged with face 2. This is so if I constrain anything to that face it will constrain to the entire face and not either the circular face OR the flat face.
View 3 Replies
View Related
Apr 28, 2013
I have an assembly which is a plated structure. I am using a skeleton file of surfaces to define these plates. I am deriving the required surface/s from this skeleton file into a part file. In the part file I have used thicken to create my plate part. I also turn off the visibility of all derived surfaces in this part.
Now in the plate part when I go into edit derived part - the surface I have used is not grayed out showing it has been consumed by my thicken feature??? I place all my part files into an assembly and create views for each part using isolate (I use these views in a drawing which is used for NC plate cutting)
So the problem I am having is that when I place a view in my drawing the derived surfaces are also showing.
However I have used this modeling technique for many previous projects on previous versions of inventor and have never had this problem.
As mentioned above I have used isolate to create these views. I have since gone back and created the views by turning off the visibility of all other components and the surfaces do not appear in my drawing views.
View 3 Replies
View Related
Mar 11, 2013
Been trying to show multiple layers/coatings in my drawing for several hours now, and finally defeated,
I have a revolved part that's made of multiple layers -- aluminum, for example, with an anodized coating and then a paint on top. I need to make a detailed drawing to show how thick each layer is, and to that end, created the part profile, added an offset rotation for layer 1 and then another offset rotation for layer two. They're thus symmetric and in full contact, but separate, distinct layers. No problem.
Turning this into a precise drawing, however, is a bit harder, since all of the layers render into one monolithic revolution. I need to show those layers distinctly, like in the png file attached. Is that possible?
View 3 Replies
View Related
Apr 13, 2009
Can we show or hide the model edges with respect to Features or parts. I think, there must be only two options. ie. "Show all hidden edges" or "show all" and "Hide all edges".
View 3 Replies
View Related
Sep 18, 2012
If I have a profile view that I split in the middle, how can I add a gap between the two sections?
View 2 Replies
View Related
